The 8V 2A Rechargeable Li-Ion Battery 7.4V Battery 18650 Cell Battery with BMS is a rechargeable lithium-ion battery pack designed for portable electronics, robotics, DIY projects, and other applications requiring a compact DC power source.
The battery pack is built using 18650 lithium-ion cells in a 7.4V nominal configuration and includes a BMS (Battery Management System) for battery protection and management. The pack is suitable for applications such as Arduino projects, robotic vehicles, motor-driven systems, portable electronics, and other low-voltage DC equipment.
Key Features
- 7.4V nominal rechargeable Li-ion battery pack
- Built using 18650 lithium-ion cells
- Integrated BMS for battery protection
- Rechargeable battery design
- Compact and portable
- Suitable for robotics and electronics projects
- Useful for Arduino and embedded systems
- Suitable for DC motor applications
- Designed for portable power applications
- Provides convenient rechargeable power for DIY projects
Technical Specifications
- Product Type: Rechargeable Li-Ion Battery Pack
- Battery Chemistry: Lithium-Ion (Li-Ion)
- Cell Type: 18650
- Nominal Voltage: 7.4V
- Maximum Charging Voltage: Approximately 8.4V
- BMS: Included
- Charging Current: Up to 2A, subject to the specific battery/BMS configuration
- Configuration: 2-cell series (2S)
- Output: DC
- Rechargeable: Yes
- Application: Robotics, electronics, portable equipment, and DIY projects
Working Principle
The battery pack uses two 18650 lithium-ion cells connected in series to provide a 7.4V nominal output. A fully charged 2-cell Li-ion pack reaches approximately 8.4V.
The integrated BMS monitors the battery cells and provides protection functions such as overcharge, over-discharge, and over-current/short-circuit protection, depending on the specific BMS design.
The battery supplies DC power to the connected load and can be recharged using a suitable 8.4V Li-ion 2S charger.
Applications
- Arduino and microcontroller projects
- 2WD and 4WD robot cars
- Self-balancing robots
- DC motor projects
- IoT and embedded electronics
- Portable electronic devices
- DIY robotics projects
- STEM and educational projects
- LED and lighting projects
- Battery-powered control systems
- Small electric projects
- Portable power applications
Advantages
- Rechargeable and reusable
- Compact 18650-cell construction
- 7.4V output suitable for many robotics applications
- Integrated BMS provides battery protection
- Suitable for portable electronics
- Useful for motor-driven projects
- Convenient alternative to disposable batteries
- Suitable for DIY, educational, and hobby projects
Usage Tips
- Use a proper 8.4V 2S Li-ion charger designed for 7.4V lithium-ion battery packs.
- Do not charge the pack using a standard 9V or 12V adapter.
- Observe correct polarity when connecting the battery.
- Do not short-circuit the battery terminals.
- Avoid puncturing, crushing, or physically damaging the battery pack.
- Do not expose the battery to excessive heat, fire, or water.
- Disconnect the battery when the project is not in use for extended periods.
- The actual capacity and continuous discharge capability depend on the 18650 cells and BMS used in the pack.
- Do not assume the battery can continuously deliver 2A simply because the charger rating is 2A; charging current and load current are different specifications.
Note: Images are for Illustration Purposes Only.
What should I check before buying a 7.4V 18650 battery pack?
Match the pack to your project’s voltage and current needs, and plan for a proper 2S charger. The pack is Rs. 1,000 and in stock, price checked in October 2026.
- Voltage: the pack gives 7.4V nominal and about 8.4V when fully charged. Check that your motor driver, regulator or board accepts that range.
- Charger: you need an 8.4V 2S Li-ion charger. A 9V or 12V adapter is not a substitute.
- Current: the 2A figure is the charging current. Continuous load current depends on the 18650 cells and BMS inside the pack, so do not assume 2A of output.
- Connections: check polarity before wiring, and confirm the pack’s connector suits your project or that you can adapt it.
- Alternatives: for single-cell builds, see the Li-Ion 3.7V 18650 Rechargeable Battery Cell (2000mAh). For charging and protection on one cell, the Li-ion Lithium Battery Charging Protection Module Type-C (TP4056) is a common choice.
Delivery is nationwide across Pakistan at a flat rate of Rs. 350. Orders ship from College Road, Rawalpindi. If you are unsure which pack fits your robot or Arduino build, ask before ordering so you get the right one the first time.
How do I install and look after a 2S Li-ion pack?
Wire it with correct polarity, charge it only with an 8.4V 2S Li-ion charger, and disconnect it when the project is idle.
- Identify the positive and negative leads before connecting anything.
- Connect through a switch or connector so the pack can be removed easily.
- Charge with a charger made for 7.4V lithium-ion packs. Never use a standard 9V or 12V adapter.
- Keep the pack away from heat, water, and physical damage. Do not short the terminals.
- Store it disconnected if the project will sit unused for a long time.
The built-in BMS handles overcharge, over-discharge and short-circuit protection, depending on the BMS design. It protects the cells, but it does not replace careful wiring. Browse the Batteries, Cells and Power Supply category for chargers and related parts, or read the Cell Price in Pakistan: AAA, AA, 18650 and BMS Guide before you decide.
Frequently Asked Questions
What charger does this 7.4V 18650 battery pack need?
Use an 8.4V 2S Li-ion charger designed for 7.4V lithium-ion packs. A fully charged 2-cell pack reaches about 8.4V, so the charger must match that. Do not charge it with a standard 9V or 12V adapter. The pack’s BMS provides protection, but the correct charger is still required for safe charging.
Can I use this battery with Arduino and robot car projects?
Yes. The pack is intended for Arduino projects, 2WD and 4WD robot cars, self-balancing robots, DC motor projects and other low-voltage DC equipment. Check that your motor driver or regulator accepts the 7.4V nominal to 8.4V full-charge range before connecting. Observe correct polarity when wiring the pack to your project.
Is the 2A rating the output current of this battery?
No. The 2A figure refers to charging current, subject to the battery and BMS configuration. Continuous discharge capability depends on the 18650 cells and BMS used in the pack. Do not assume the pack can continuously deliver 2A just because the charger rating is 2A. Charging current and load current are different specifications.
What is the price and delivery for this battery pack in Pakistan?
The 8V 2A Rechargeable Li-Ion Battery 7.4V 18650 Cell Battery with BMS is priced at Rs. 1,000 and is in stock, price checked in October 2026. Delivery is nationwide across Pakistan at a flat rate of Rs. 350. The shop is on College Road, Rawalpindi, and students can get parts and guidance for projects.
How should I store the battery when my project is not in use?
Disconnect the pack when the project will not be used for extended periods. Keep it away from excessive heat, fire and water, and avoid puncturing, crushing or otherwise damaging it. Do not short-circuit the terminals. These habits protect the cells and the BMS and keep the pack ready for your next build.












Reviews
There are no reviews yet