The 5pcs Soldering Iron Tips Set Lead Free Bits 60W is a replacement soldering tip set designed for compatible 60W soldering irons. The set provides multiple tip shapes, making it suitable for different soldering tasks such as electronic component soldering, wire connections, PCB assembly, and general repair work.
These replacement tips are useful for maintaining soldering irons and keeping a selection of tip shapes available for both fine and general-purpose soldering applications.
Key Features
- Set of 5 replacement soldering iron tips
- Suitable for compatible 60W soldering irons
- Lead-free soldering tip design
- Multiple tip shapes for different soldering applications
- Suitable for PCB and electronic component soldering
- Useful for wire and terminal soldering
- Replaceable design for extended soldering iron usability
- Suitable for electronics repair and DIY projects
- Helps maintain consistent soldering performance
Technical Specifications
- Product Type: Soldering Iron Replacement Tips
- Quantity: 5 Pieces
- Power Compatibility: 60W soldering irons
- Tip Type: Lead-Free Soldering Tips
- Application: Electronics soldering, PCB assembly, wire soldering, and repair
- Design: Replaceable tip
- Tip Shapes: Multiple shapes included
- Installation: Push-on / screw-on depending on compatible soldering iron design
Working Principle
A soldering iron tip transfers heat from the soldering iron’s heating element to the solder joint. When the tip reaches the required operating temperature, it melts solder and allows it to flow around the electronic component lead, wire, or PCB pad.
The interchangeable tip design allows users to select a suitable tip shape for different soldering tasks. Smaller or finer tips can be useful for precision work, while broader tips can transfer more heat for larger joints and wires.
Applications
- PCB soldering
- Electronic component assembly
- Wire soldering
- Connector and terminal soldering
- Electronics repair
- DIY electronics projects
- Arduino and robotics projects
- Hobbyist soldering
- General electrical repair
- Through-hole component soldering
Advantages
- Five replacement tips provide multiple options
- Useful for different soldering applications
- Helps extend the service life of a compatible soldering iron
- Suitable for electronics and repair work
- Convenient replacement set
- Useful for both hobbyists and technicians
- Supports precision and general-purpose soldering
Usage Tips
- Confirm that the tip dimensions and mounting style are compatible with your soldering iron before use.
- Use the appropriate tip shape for the soldering task.
- Tin the tip with solder before soldering to improve heat transfer and protect the tip.
- Keep the tip clean during use.
- Avoid excessive mechanical force on the tip.
- Do not operate the soldering iron at temperatures higher than recommended by the manufacturer.
- Allow the tip to cool completely before replacing it.
Note: Images are for Illustration Purposes Only.
Will these tips fit my soldering iron?
These tips fit soldering irons that take push-on or screw-on tips and are rated at 60W. They are not universal. Check your iron’s tip mount and wattage before ordering.
To confirm a match, look at how your current tip attaches. If it slides onto a ceramic heater or screws into a barrel, and your iron is 60W, this set should work. If your iron uses a different locking system or a different wattage, these tips may not fit.
If you are unsure, measure the inner diameter of your old tip and compare it with the tips in this set. A loose fit means poor heat transfer. A tight fit can damage the heater. When in doubt, ask us before you buy.
Which tip shape should I use for my soldering job?
Use a fine point for small pads and through-hole component leads, and a broader tip for wires, connectors and ground planes. The set includes multiple shapes so you can pick the right one for each task.
Here is a quick guide:
- Fine conical or pointed tip: best for small PCB pads, SMD work and tight spaces.
- Chisel or screwdriver tip: good for drag soldering and general through-hole work.
- Bevel or hoof tip: holds a small pool of solder for multi-pin components.
- Broad tip: moves more heat into thick wires, terminals and ground planes.
Match the tip to the joint size. A tip that is too small will struggle to heat a large joint. A tip that is too large can damage small pads.
How do I install and care for these tips?
Let the iron cool completely, remove the old tip, push or screw on the new one, then heat it and tin the tip with solder before use. Clean the tip often and avoid excessive force.
Follow these steps for a long tip life:
- Turn off and unplug the soldering iron. Wait until it is fully cool.
- Remove the old tip according to your iron’s design (push-on or screw-on).
- Fit the new tip securely. It should sit firmly without wobbling.
- Heat the iron to its normal working temperature.
- Apply a small amount of solder to the tip (tinning) to protect it and improve heat transfer.
- Wipe the tip on a damp sponge or brass wool during use. Do not file or sand the tip.
- Before storing, tin the tip again and let it cool.
Never use excessive force when fitting or removing a tip. Do not run the iron above the manufacturer’s recommended temperature. These habits prevent tip damage and keep soldering performance consistent.
Frequently Asked Questions
Are these tips compatible with any 60W soldering iron?
They fit many 60W soldering irons that use push-on or screw-on tips, but they are not universal. Check your iron’s tip mount and wattage before ordering. If your iron uses a different locking system or a different wattage, these tips may not fit. When in doubt, ask us with your iron model.
What is the price of this 5pcs soldering iron tips set?
The price is Rs. 350 for the set of five tips. This price was checked in October 2026. It is a replacement set, so you get five tips for less than the cost of a new soldering iron. Delivery is available across Pakistan.
Do you deliver these soldering tips across Pakistan?
Yes, we deliver nationwide across Pakistan. Shipping is flat-rate Rs 350 per order. You can order from anywhere in the country and receive the tips at your address. For school, college and university projects, we also provide guidance on soldering.
How do I choose the right tip shape for my project?
Use a fine point for small PCB pads and component leads, a chisel tip for general through-hole work, and a broader tip for wires and ground planes. The set includes multiple shapes. Match the tip to the joint size: too small struggles with large joints, too large can damage small pads.
What should I do if the tips do not fit my soldering iron?
If the tips do not fit, do not force them. Check your iron’s tip mount and wattage again. If they still do not fit, contact us for a return or exchange. We can also help you find the correct tips for your iron model.













Hamza Sajid (verified owner) –
Hamza Sajid –