TU-200AR Network Ethernet Cable Crimper

Overview

The TU-200AR Network Ethernet Cable Crimper is a versatile, modular crimping tool designed for technicians, installers and IT professionals. This Ethernet cable crimper cuts, trims and crimps multiple types of modular plugs without the need to change dies, speeding up cable termination and reducing tool swaps.

Key Features of the TU-200AR Ethernet Cable Crimper

• All-in-one modular crimping: Cut, trim and crimp without changing the modular die set.
• Wide plug compatibility: Works with 10P10C, AMP 8P8C/RJ-45, 6P6C/RJ-12, 6P4C/RJ-11, 4P4C and 4P2C plugs.
• Supports offset and DEC/OFF SET PLUG-6P6C connectors for varied telecom needs.
• Ergonomic handles and rugged steel construction for long-term use in the field.
• Precise crimping action for reliable terminations and consistent electrical contact.

Compatibility and Connectors

• RJ45 (8P8C) for Ethernet network terminations
• RJ12 (6P6C) and RJ11 (6P4C) for phone and telecom lines
• 10P10C and 4P4C/4P2C for specialty modular connectors
• Compatible with super five and six crystal heads and other modular plug variants

How to Use the TU-200AR Network Cable Crimper

1. Strip the cable jacket to the recommended length for your modular plug.
2. Arrange and insert conductors into the modular plug according to the wiring standard.
3. Place the plug into the crimper’s die area and confirm alignment.
4. Squeeze the handles firmly and evenly to cut, trim and crimp in one operation.
5. Release and inspect the termination for secure seating and correct pin contact.

Tips and Best Practices

• Ensure conductors are fully seated in the plug before crimping for reliable contact.
• Use the correct plug type for your application (RJ45 for Ethernet, RJ11/RJ12 for phone).
• Test each cable after termination with a cable tester to verify pinout and continuity.
• Note: Super five and six crystal heads can be clamped effectively with this crimping tool.

Specifications

• Tool type: Modular crimping tool for network and telecom connectors
• Supported plugs: 10P10C, 8P8C (RJ45), 6P6C (RJ12), 6P4C (RJ11), 4P4C, 4P2C
• Construction: High-quality steel jaws with ergonomic, non-slip handles
• Operation: Cuts, trims and crimps in a single action without die changes

Care and Maintenance

• Keep the tool clean and free of debris after use.
• Occasionally apply light machine oil to pivot points for smooth operation.
• Store in a dry place to prevent corrosion and preserve alignment.

What is Included

• 1 x TU-200AR Network Ethernet Cable Crimper
• User guide with basic crimping instructions

Why Choose the TU-200AR Ethernet Cable Crimper

This TU-200AR Ethernet cable crimper is ideal for network installers and technicians who need a single tool that handles multiple plug types reliably. Its all-in-one design reduces tool changes, improves workflow and delivers consistent, professional terminations for Ethernet and telecom cabling.

Order the TU-200AR Network Ethernet Cable Crimper today and streamline your cable termination tasks with a reliable, ergonomic tool built for repeated professional use.