-7%

2.4 Inch SPI TFT Non-Touch Display Screen Module ILI9341 (320×240)

Availability:

In stock


  • 2.4 inch full-color TFT LCD module with 320×240 QVGA resolution
  • ILI9341 driver IC and 4-wire SPI interface for fast refresh
  • 65K colors (16-bit RGB) and white LED backlight
  • 3.3V–5V compatible, works with Arduino, ESP32, STM32, Raspberry Pi
  • Non-touch design, ideal for embedded displays and IoT panels
  • Compact size: approx. 72mm × 52mm × 7mm
WhatsAppChat on WhatsApp

₨ 1,400 ₨ 1,500

In stock

The 2.4 Inch SPI TFT Non-Touch Display Screen Module (320×240) is a vibrant full-color TFT LCD module designed for a wide range of electronic and embedded applications. Featuring a 320×240 pixel (QVGA) resolution and the ILI9341 driver IC, this display delivers clear, detailed, and colorful visuals in a compact form factor.

With its SPI (Serial Peripheral Interface) communication, the module ensures fast refresh rates and easy interfacing with microcontrollers such as Arduino, ESP32, STM32, and Raspberry Pi. This non-touch version provides a cost-effective solution for projects that require high-quality graphical output without touch interaction.

Features:

  • Display Size: 2.4 inches (diagonal)
  • Resolution: 320 × 240 pixels (QVGA)
  • Display Type: Full-color TFT LCD
  • Touchscreen Type: Non-Touch
  • Display Driver IC: ILI9341
  • Interface Type: SPI (Serial Peripheral Interface)
  • Color Depth: 65K colors (16-bit RGB)
  • Operating Voltage: 3.3V – 5V compatible
  • Backlight: White LED for enhanced brightness
  • Viewing Angle: Wide and clear viewing range
  • High Refresh Rate: Smooth display rendering for graphics and text
  • Low Power Consumption: Suitable for battery-operated systems
  • Compact Design: Ideal for portable and space-constrained applications

Applications:

  • Embedded system display panels
  • IoT monitoring devices
  • DIY electronics and educational projects
  • Robotics control displays
  • Industrial instrumentation readouts
  • Data loggers and small graphical interfaces

Specifications:

  • Screen Size: 2.4 inches
  • Resolution: 320 × 240 pixels (QVGA)
  • Display Controller: ILI9341
  • Interface: SPI (4-wire)
  • Touch Type: Non-touch
  • Color Depth: 65K (16-bit RGB)
  • Operating Voltage: 3.3V – 5V
  • Backlight Type: White LED
  • Operating Temperature: -20°C to +70°C
  • Module Dimensions: Approx. 72mm × 52mm × 7mm

Note: Images are for Illustration Purposes Only.

Which projects is the 2.4 Inch SPI TFT Display best for?

The 2.4 Inch SPI TFT Display is best for projects that need a small, bright colour screen but do not need touch input. It suits embedded system panels, IoT monitoring devices, robotics control displays, data loggers and educational projects.

Because it uses SPI, it connects easily to Arduino, ESP32, STM32 and Raspberry Pi boards. The 320×240 resolution and 65K colours make it clear enough for graphs, menus and sensor readouts. If you need touch, choose a touch version. If you need a simple text display, a 16×2 LCD Display with I2C Module may be enough.

For very small, low-power projects, an OLED like the 0.96 Inch 128×64 I2C OLED Display Module or the 1.3 Inch 128×64 OLED Display Module can be a better fit. Browse more options in our Display Modules and LCDs category.

How do I connect and use the 2.4 Inch SPI TFT Display?

The 2.4 Inch SPI TFT Display connects to your microcontroller using the 4-wire SPI interface. You need to wire the power pins and the SPI lines, then load a library that supports the ILI9341 driver.

Typical connections:

  • VCC to 3.3V or 5V (the module is 3.3V–5V compatible)
  • GND to ground
  • SCK to SPI clock
  • MOSI to SPI data out
  • CS to a digital pin for chip select
  • DC to a digital pin for data/command
  • RST to a digital pin for reset (or tie to reset)
  • LED to 3.3V or 5V for backlight (use a resistor if needed)

On Arduino, the Adafruit_ILI9341 or TFT_eSPI library works well. On ESP32, TFT_eSPI is a common choice. On Raspberry Pi, you can use the SPI bus with Python libraries. Always check the logic level: the module is 3.3V–5V compatible, but some boards are 3.3V only.

If you are building a project that also needs a simple text display, you can combine it with a 16×2 LCD Display with I2C Module for status messages.

Frequently Asked Questions

What is the price of the 2.4 Inch SPI TFT Display in Pakistan?

The 2.4 Inch SPI TFT Non-Touch Display Screen Module ILI9341 (320×240) is priced at Rs. 1,400. This price was checked in September 2026. It is available from College Road Electronics in Rawalpindi, with nationwide delivery across Pakistan for a flat-rate shipping fee of Rs. 350.

What is the difference between this display and a touch version?

This is a non-touch display, so it does not have a touch panel. It is a cost-effective choice for projects that only need to show graphics, text or sensor data. If your project requires touch input, you would need a touch-enabled display module instead.

How do I get help with wiring or code for this display?

College Road Electronics supports students and hobbyists with parts and guidance for school, college and university projects. You can contact them for help with wiring and code examples. They are based in Rawalpindi and deliver nationwide across Pakistan.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop