ZOP Power 3S 11.1V 2800mAh 25C LiPo Battery

Overview: ZOP Power 3S 11.1V 2800mAh 25C LiPo Battery

The ZOP Power 3S 11.1V 2800mAh 25C LiPo Battery is a high-capacity, high-performance rechargeable lithium polymer pack engineered for RC models, FPV racing, and DIY electronics. Delivering reliable power and stable voltage under load, this 3S LiPo battery balances long run times and strong discharge capability for demanding applications.

Why Choose this 3S LiPo Battery

• Reliable Power Output: 25C continuous discharge rating provides up to 70A maximum current for motors and high-draw electronics.
• Optimized Capacity: 2800mAh (approximately 31.08Wh) for extended flight or runtime without adding excessive weight.
• Universal Compatibility: Pre-fitted XT60 power connector and JST-XH balance connector work with most chargers and RC gear.
• Compact and Lightweight: Designed for smooth integration into small airframes and vehicles (approx. 135 × 42 × 23 mm).

Key Features

• Brand: ZOP Power
• Battery Type: Lithium Polymer (LiPo), Rechargeable
• Configuration: 3S (3 cells in series)
• Nominal Voltage: 11.1V
• Capacity: 2800mAh (31.08Wh)
• Discharge Rate: 25C continuous (70A maximum theoretical)
• Connector Type: XT60 (power)
• Balance Connector: JST-XH
• Approximate Dimensions: 135mm × 42mm × 23mm
• Approximate Weight: 200g – 220g
• Cycle Life: Typically 300 to 500 cycles with proper care

Technical Specifications

• Nominal Voltage: 11.1V (3S)
• Capacity: 2800mAh
• Energy: ~31.08Wh
• Continuous Discharge Rate: 25C
• Maximum Discharge Current: 70A (2800mAh × 25C theoretical)
• Connector: XT60 plug (power)
• Balance Connector: JST-XH
• Dimensions: 135mm × 42mm × 23mm (approx.)
• Weight: 200g – 220g (approx.)

Compatible Applications

• RC drones and quadcopters
• FPV racing drones and freestyle builds
• RC airplanes and helicopters
• RC cars, trucks, and boats
• Robotics, embedded electronics, and DIY projects requiring high-capacity LiPo

Charging, Storage and Safety Tips

• Charge only with a compatible LiPo charger using the JST-XH balance connector to maintain cell balance.
• Do not over-discharge; stop use before cell voltage drops below 3.0V per cell to preserve life.
• Store at about 50% charge (3.7 to 3.85V per cell) in a cool, dry place away from flammable materials.
• Inspect the pack regularly for puffing, damage, or connector wear. Do not use a damaged battery.
• Transport and dispose of LiPo batteries following local regulations and safety guidelines.

Installation and Compatibility Notes

The pack comes with an XT60 power plug and JST-XH balance lead for wide compatibility. Confirm your device supports a 3S 11.1V input and that the ESC or motor system can handle the current draw. For FPV racing setups, check available space and mounting options to accommodate the battery dimensions.

Performance and Durability

Engineered using advanced LiPo cell technology, this ZOP Power battery provides consistent voltage under load and extended cycle life when charged and stored correctly. Expect dependable performance for training, racing, and recreational flying or driving.

What’s in the Box

• ZOP Power 3S 11.1V 2800mAh 25C LiPo Battery (XT60 fitted)
• JST-XH balance connector attached
• Safety and charging instruction sheet

Note: Images are for illustration purposes only.