The Lithium-Ion 2-Cell Battery Holder Shield V8 is a compact and versatile power supply module designed for projects requiring both 3V and 5V regulated outputs. It can efficiently convert the voltage from two 18650 lithium-ion cells to provide stable 3V/1A and 5V/3A outputs, making it ideal for powering microcontrollers, development boards (like Arduino or ESP32), IoT devices, and portable projects.
Built with a high-efficiency power management circuit, this module not only supplies clean and consistent power but also includes advanced battery protection features, ensuring safe operation and long battery life. It comes equipped with LED indicators and an easy-to-use manual on/off control system, giving users full visibility and control over their power setup.
Features:
- Dual Output Voltages: Provides 3V (1A) and 5V (3A) regulated outputs, perfect for powering multiple circuits or modules simultaneously.
- Supports Two 18650 Lithium-Ion Cells: Designed to hold and manage 2 cells in parallel for extended power capacity.
- Built-in Battery Protection IC: Offers overcharge, over-discharge, overcurrent, and overvoltage protection, ensuring safe battery operation.
- 4-Level Power Indicator LEDs: Displays real-time battery status with four LED lights — making it easy to check remaining charge at a glance.
- Smart Charging & Status Indication:
- Red LED – Charging
- Green LED – Fully charged
- Manual On/Off Control: Module boots in working state by default; can be manually turned off using button.
- High-Efficiency Voltage Conversion: Ensures minimal power loss and stable voltage output even under varying load conditions.
- Compact and Durable Design: Perfect for integration into DIY electronics, robotics, and mobile power systems.
Applications:
- DIY portable power supply projects
- Arduino, ESP32, and Raspberry Pi-based devices
- Robotics and embedded systems
- Powering small appliances or modules on the go
- Backup power for electronic experiments
Specifications:
- Model: V8 Lithium-Ion 2-Cell Battery Holder Shield
- Input: 2 × 18650 Lithium-Ion Cells
- Output 1: 3V / 1A
- Output 2: 5V / 3A
- Battery Protection: Overcharge, Over-discharge, Overcurrent, Overvoltage
- Power Display: 4-level LED indicator
- Charging Indicator: Red (Charging) / Green (Full)
- Default Mode: Always ON (manual shutdown or modifiable auto shutdown)
- Material: ABS + PCB
- Dimensions: Approx. 90mm × 40mm × 25mm
Note: Images are for Illustration Purposes Only.
What can I power with the Lithium Ion 2-Cell Battery Holder Shield?
The shield provides two regulated outputs: 3V at 1A and 5V at 3A. That is enough for most microcontroller boards, sensors and small motors.
Typical uses include:
- Arduino, ESP32 and Raspberry Pi boards that accept 5V or 3V input
- Robotics and embedded systems with small DC motors or servos
- Portable IoT devices and sensor nodes
- Backup power for experiments and test rigs
The 5V output can run a single-board computer like a Raspberry Pi, but check the current draw of your model. The 3A limit is shared across the outputs, so add up what you plan to connect. For higher current, use a separate regulator.
Which 18650 cells work with this shield and how do I install them?
Use two 18650 lithium-ion cells. The holder accepts standard 18650 size (18 mm diameter, 65 mm length). Button-top or flat-top cells both fit, but button-top is easier to seat.
Installation steps:
- Slide the cells into the holder, matching the polarity marks. The shield manages them in parallel, so both cells should be the same model and similar charge level.
- Connect your load to the 3V or 5V output terminals.
- Charge through the onboard charging circuit. The red LED shows charging, green shows full.
- Use the manual button to turn the module off. By default it boots in the working state.
Do not mix old and new cells or different capacities. For a matched pair, see the Li-Ion 3.7V 18650 Rechargeable Battery Cell (2000mAh). If you only need to charge a single cell, the Li-ion Lithium Battery Charging Protection Module Type-C (TP4056) is a simpler option.
Frequently Asked Questions
Does the Lithium Ion 2-Cell Battery Holder Shield come with batteries?
No, the shield is supplied without 18650 cells. You need two lithium-ion 18650 cells to use it. We stock the Li-Ion 3.7V 18650 Rechargeable Battery Cell (2000mAh) separately. Use two cells of the same model and similar age for best results.
Can I use this shield to power an Arduino or ESP32?
Yes. The 5V output at 3A can power an Arduino or ESP32 board through the 5V pin or USB. The 3V output suits 3.3V logic boards. Just keep the total current draw below the output limits and check your board’s input voltage range.
Does the shield protect the batteries from overcharge and over-discharge?
Yes. It includes a battery protection IC that guards against overcharge, over-discharge, overcurrent and overvoltage. Four LEDs show the charge level. A red LED means charging, green means fully charged. This helps keep your cells safe and extends their life.
How do I charge the two 18650 cells on this shield?
Connect a 5V USB power source to the charging input. The onboard charging circuit manages the cells. The red LED lights while charging and turns green when full. You do not need a separate charger. Always use matched cells and do not leave them unattended while charging.














Saifullah Mir (verified owner) –
Perfect I wish everybody knew about this
Saifullah Mir –