-29%
,

Bullet Connectors Pair in Gold Color (3.5mm)

Availability:

In stock


– 3.5mm male and female gold-plated bullet connectors (pair)
– Low-resistance, high-conductivity connections
– Ideal for brushless motors, ESCs, and LiPo batteries
– Corrosion-resistant, durable gold-plated brass
– Secure snug fit to prevent accidental disconnection
– Easy to solder and install for RC and DIY electronics

WhatsAppChat on WhatsApp

₨ 50 ₨ 70

In stock

Bullet Connectors Pair in Gold Color (3.5mm)

High-quality 3.5mm gold bullet connectors pair engineered for secure, low-resistance power connections in RC models, drones, robotics, electric vehicles, and other high-current electronics. Gold-plated brass construction provides excellent conductivity and corrosion resistance for long-term, reliable performance.

Why Choose Gold-Plated 3.5mm Bullet Connectors

  • Superior conductivity: Gold plating reduces contact resistance for more efficient power transfer.
  • Corrosion resistance: Gold finish protects against oxidation and environmental degradation.
  • Durability: Robust brass core with a precise fit for repeated mating cycles.
  • Reliable high-current performance: Designed for demanding applications like brushless motors and LiPo battery connections.

Key Features

  • Type: Male and Female bullet connectors (pair)
  • Size: 3.5mm diameter contacts
  • Material: Gold-plated brass for excellent conductivity and corrosion resistance
  • High current handling capacity suitable for RC, drones, and electric projects
  • Secure, snug fit to minimize accidental disconnection during operation
  • Easy to solder and assemble for fast installation and maintenance

Technical Specifications

  • Contact diameter: 3.5mm
  • Contact material: Brass with gold plating
  • Connector type: Male (bullet) and Female (socket)
  • Use case: High-current DC power connections

Applications

  • Brushless motor and ESC (Electronic Speed Controller) connections
  • LiPo battery leads for RC cars, drones, helicopters, and airplanes
  • Robotics, DIY electronics, and power distribution boards
  • Electric vehicles and other high-current power systems

Installation and Soldering Tips

  1. Strip wire insulation to the recommended length and tin the wire for a clean solder joint.
  2. Insert the tinned wire fully into the bullet contact and apply heat so solder flows evenly into the barrel.
  3. Allow the solder to cool naturally for a strong mechanical and electrical connection.
  4. Use heat shrink tubing or insulating sleeves to prevent short circuits and protect the joint from vibration.
  5. Test connections under load to verify low resistance and secure fit before final assembly.

Compatibility and Performance

These 3.5mm bullet connectors are compatible with most RC components that accept 3.5mm contacts and are ideal where low contact resistance and reliable high-current transfer are required. The gold-plated finish helps maintain consistent performance even in humid or corrosive environments.

Package Contents

  • 1 x Male 3.5mm gold-plated bullet connector
  • 1 x Female 3.5mm gold-plated bullet connector

Note: Images are for Illustration Purposes Only

What should I check before buying 3.5mm bullet connectors?

Match the connector to the contact size your motor, ESC or battery lead already uses, and buy the male and female pair together so the joint mates properly.

Before you order, check these points:

  • Contact size: this pair has 3.5mm diameter contacts, so it fits components built for 3.5mm bullets. A 4mm or 5mm socket will not mate with it.
  • Quantity: the pack contains one male bullet and one female socket. Count how many motor-to-ESC joints and battery leads you need to wire, then order enough pairs.
  • Wire gauge: the wire must fit inside the barrel of the contact before soldering. Test-fit a short length first.
  • Soldering tools: you need a soldering iron, solder, and heat shrink tubing to insulate each joint.

Each pair is priced at Rs. 50, checked in October 2026, so stocking a few spares costs little. The connectors are in stock and listed under Accessories. Delivery is nationwide across Pakistan at a flat rate of Rs 350. If you are wiring a student project, the shop also stocks parts like 5mm LEDs and a tactile push button switch for the control side of the build.

Are gold-plated bullet connectors better than plain brass ones?

Yes, for most projects. The gold plating on these 3.5mm bullet connectors lowers contact resistance and protects the brass core from oxidation, which keeps the connection steady over time.

Plain brass contacts work, but they tarnish faster, especially in humid conditions. Tarnish raises resistance at the joint, and that shows up as heat and voltage drop under load. Gold plating resists this, so the connector holds a consistent low-resistance path through repeated mating.

The brass core still gives the contact its strength and snug fit. Gold is only the surface layer, so do not file or sand the contact. Solder only the wire barrel, keep the mating surface clean, and the pair will serve brushless motor, ESC and LiPo battery connections well. For low-current signal parts in the same build, a BC547 NPN transistor covers switching and amplification needs.

Frequently Asked Questions

How many connectors come in one pack?

One pack contains a single pair: one male 3.5mm gold-plated bullet connector and one female socket. If you are wiring a three-phase brushless motor to an ESC, you need three pairs for that one connection. Count every joint in your build, including battery leads, and order the matching number of pairs.

Can I use these 3.5mm bullet connectors with a LiPo battery?

Yes. They are designed for high-current DC power connections, which includes LiPo battery leads on RC cars, drones, helicopters and airplanes. Make sure the battery lead uses 3.5mm contacts, solder the wire fully into the barrel, and cover the joint with heat shrink before the first run.

How do I solder a 3.5mm bullet connector without damaging it?

Strip and tin the wire, insert it fully into the contact barrel, then apply heat until solder flows evenly. Let the joint cool naturally instead of cooling it quickly. Keep the iron off the outer mating surface, and slide heat shrink tubing over the joint to insulate it and resist vibration.

Do you deliver these connectors outside Rawalpindi?

Yes. College Road Electronics delivers nationwide across Pakistan at a flat-rate shipping charge of Rs 350. The 3.5mm bullet connectors are in stock at Rs. 50 per pair, checked in October 2026. Students can also ask the shop for guidance on parts for school, college and university projects.

Will these fit my existing 3.5mm motor and ESC connectors?

They mate with components that accept 3.5mm contacts, so check the contact diameter on your motor and ESC before ordering. A 4mm or 5mm connector will not fit. The male bullet plugs into the female socket with a snug fit that resists accidental disconnection during operation.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop