Student Corner
-
Sensor And Modules, Students Corner
NEO-6M GPS Module with Large Antenna for Arduino
GPS modules NEO-6M, 3V-5V power supply UniversalModel: GY-GPS6MV2Destined module with ceramic antenna, signal superSave the configuration parameter data EEPROM DownWith data backup batteryThere are LED signal indicatorAntenna size 25 * 25mmModule size 25mm * 35mmInstallation aperture 3mmDefault Baud Rate: 9600Compatible with various flight control modules that provide GPS computer test softwareSKU: n/a -
IoT and Wireless Communation, Students Corner
ESP8266 ESP01 Wifi Module in Pakistan
The ESP 01 or ESP8266 WiFi Module is a self-contained SOC. ESP8266 serial module has integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The esp8266 wifi module Arduino is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed with an AT command set firmware, meaning, you can simply hook this up to your Arduino device and get about as much WiFi-ability as a WiFi Shield offers (and that’s just out of the box)! The esp 01 connect to wifi module is an extremely cost-effective board with a huge, and ever-growing, community.
ESP8266 ESP01 Wifi Module Specifications:
- 802.11 b/g/n
- 1MB Flash Memory
- SDIO 1.1 / 2.0, SPI, UART
- Wi-Fi Direct (P2P), soft-AP
- STBC, 1×1 MIMO, 2×1 MIMO
- Integrated TCP/IP protocol stack
- Power down leakage current of <10uA
- Wake up and transmit packets in < 2ms
- +19.5dBm output power in 802.11b mode
- Standby power consumption of < 1.0mW (DTIM3)
- A-MPDU & A-MSDU aggregation & 0.4ms guard interval
- Integrated PLLs, regulators, DCXO and power management units
- Integrated TR switch, balun, LNA, power amplifier and matching network
- Integrated low power 32-bit CPU could be used as an application processor
Package Include:
- 1 x ESP8266 ESP01 Wifi Module
Best Online Shopping Website for ESP8266 ESP01 Wifi Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
-
Sensor And Modules, Students Corner
Voltage Regulator Module PWM DC 4-40V 8A 200W XL4016E1 XH-M404
XL4016 PWM Adjustable 4-36V To 1.25-36V Step-Down Board Module Max 8A 200W DC-DC Step Down Buck Converter Power Supply
Description:
100% brand new and high quality.Features:The voltage regulator has excellent linearity regulation and load regulationWith multiple protection: over-current protection, over-temperature protection and short circuit protection, etc.Wide Application:
Car audio, radio, navigator, monitor, LED car display, air conditioner, interphone, motors etc.Product name: DC voltage regulatorVoltage regulating mode: PWM modulationInput voltage: DC 4-38VOutput voltage: DC 1.25-36VMaximum current: 8A(please add fan and make current less than 5A for a long term use)Maximum power: 200WConversion efficiency: 95%Switching frequency: 180KHzWorking Temperature: -45~+85°Size: 6×3.7cm/2.36×1.46inchFeatures:
- The voltage regulator has excellent linearity regulation and load regulation
- With multiple protection: over-current protection, over-temperature protection and short circuit protection, etc.
- Wide Application:
Car audio, radio, navigator, monitor, LED car display, air conditioner, interphone, motors etc.
Note:
Please make sure there is a 2V voltage difference between input voltage and output voltage
The maximum output current can reach 8A; For long time working please make sure the current is less than 5A.
This is not a step up module, but a step down module.SKU: n/a -
Sensor And Modules, Students Corner
LCD 16*2 with Green back light (Normal Quality)
SD-C1602A 16 x 2 Character LCD Module with Yellow and Green LED Backlight
Display format: 16 x 2
LCD type: STN, positive and transmissive
Drive method: 1/16 duty, 1/5 bias
Drive Voltage: +5.0 V
Operating temperature: 0 to +50
Storage temperature: -20 to +70
Driver IC: SPLC78D or equivalent
Backlight type: yellow-green LED
Module size: (W) 80.0 x (H) 36.0mm
Viewing area: (W)64.5 x (H) 13.8mm
Dot size: (W) 0.55 x (H) 0.50mm
Character size: (W) 2.95x (H)4.35mm
Customer’s designs are welcomed
SKU: n/a -
Sensor And Modules, Students Corner
ECG Module AD8232
Application:
– Fitness and sports heart rate monitoring
– Portable ECG
– Remote health monitor
– Game peripheral equipment
– Bioelectricity signal collection
Specification:
– AD8232 adopts double poles high-pass filter to eliminate the motion artifacts and electrode half cell potential
– AD8232 adopts an operational amplifier that is without using constraint to build a three pole low pass filter, eliminating extra noises
– Rated temp range : 0—-70degree
– Working temp range: -40—–85degreeSKU: n/a -
Sensor And Modules, Students Corner
4 Channel Relay Module Board For Arduino
- 5V 4-Channel Relay interface board, and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP431, TTL logic)
- Indication LED’s for Relay output status
SKU: n/a -
Boards and Programmer, Students Corner
Arduino NANO V3
Description
Arduino Nano V3 is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3). Arduino Nano board has more or less the same functionality as the Arduino UNO but in a different package. Arduino Nano programming module lacks only a DC power jack and works with a Mini-B USB cable instead of a standard one.
Specifications of Nano V3 :
- Microcontroller: ATmega328 (Arduino nano).
- Operating Voltage (logic level): l5 V.
- Input Voltage (recommended): 7-12 V.
- Input Voltage (limits): 6-20 V.
- Digital I/O Pins: 14 (of which 6 provide PWM output).
- Analog Input Pins: 8.
- DC Current per I/O Pin: 40 mA.
- Flash Memory: 16 KB (ATmega168) or 32 KB (ATmega328) of which 2 KB is used by the boot loader.
- SRAM: 1 KB (ATmega168) or 2 KB (ATmega328).
- EEPROM: 512 bytes (ATmega168) or 1 KB (ATmega328).
- Clock Speed: 16 MHz.
- Dimensions: 0.73″ x 1.70″.
- Length: 45 mm.
- Width: 18 mm.
- Weight: 5 g.
Features of Arduino Nano V3;
- Automatic reset during program download
- Power OK blue LED
- Green (TX), red (RX), and orange (L) LED
- Auto-sensing/switching power input
- Small mini-B USB for programming and serial monitor
- ICSP header for direct program download
- Standard 0.1” spacing DIP (breadboard friendly)
- Manual reset switch
Related Documents:
Package Includes:
-
1 x Arduino Nano V3 Arduino Nano
Youtube Tutorial:
https://www.youtube.com/watch?v=R102xfcx75I
SKU: n/a -
Sensor And Modules, Students Corner
IR Remote control Module Kit (TX/RX)
Battery:CR2025 Button batteries(not included)
Transmission Distance: up to 8m (depending on the surrounding environment, sensitivity of receiver etc)
Effective Angle: 60°
Static Current: 3~5uA,
Dynamic Current: 3~5mA
Remote size: 8.5 x 4 x 0.65cm/3.3 x 1.6 x 0.25inch (L x W x H)Package Included:1PC*Infrared Remote Control IR Receiver Module DIY Kit HX1838 For Raspberry Pi
SKU: n/a -
Accessories, Students Corner
12V 3.5 Inch Exhaust Fan in Pakistan
3.5 Inches12V DC Exhaust Fan is the best choice for customers. This Exhaust Fan with high-quality material is ideal for compact PC cases (HTPC, ITX, Small Form Factor) and other chassis (intake & exhaust), replacement fan for NAS and other devices, etc. This fan is made from injection-moulded, plastic housing a durable DC motor for long life. There are 4 through holes to allow easy mounting to a variety of surfaces. Our 12V DC fans are the clear choice for anyone needing, quality, reliability and low-cost cooling in their DIY project.
Package Include:
1 x 12V 3.5 Inch DC Exhaust Fan
Best Online Shopping Website for 12V DC Exhaust Fan, Computer Fan in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Boards and Programmer, Students Corner
Raspberry Pi 4 Model B with 2 GB Ram Complete Kit
Products :
Raspberry Pi 4 2GB
5V 3A Raspberry Pi 4 USB-C Power Adapter in Pakistan
32GB SD Card With Pre-Loaded Noobs Software for Raspberry Pi in Pakistan
Micro HDMI To Standard HDMI Cable for Raspberry Pi 4 in Pakistan
40 Pin GPIO Extension Board Ribbon Cable for Raspberry Pi in Pakistan
Backlit 2.4G Wireless i8 Mini Keyboard in PakistanSKU: n/a -
Electronic Components, Students Corner
L293D IC Dual H-Bridge Motor Driver
The Device is a monolithic integrated high voltage, high current four channel driver designed to accept standard DTL or TTL logic levels and drive inductive loads (such as relays solenoids, DC and stepping motors) and switching power transistors. To simplify use as two bridges each pair of channels is equipped with an enable input. A separate supply input is provided for the logic, allowing operation at a lower voltage and internal clamp diodes are included. This device is suitable for use in switching applications at frequencies up to 5 kHz. The L293D is assembled in a 16 lead plastic package that has 4 center pins connected together and used for heatsinking.
L293D IC Features:
- Speed and Direction control is possible
- Motor voltage Vcc2 (Vs): 4.5V to 36V
- Maximum Peak motor current: 1.2A
- Supply Voltage to Vcc1(VSS): 4.5V to 7V
- Transition time: 300ns (at 5Vand 24V)
- Automatic Thermal shutdown is available
- Available in 16-pin DIP, TSSOP, SOIC packages
- Maximum Continuous Motor Current: 600mA
- It can be used to run Two DC motors with the same IC.
L293D IC Pin Configuration:
Pin Number
Pin Name
Description
1
Enable 1,2
This pin enables the input pin Input 1(2) and Input 2(7)
2
Input 1
Directly controls the Output 1 pin. Controlled by digital circuits
3
Output 1
Connected to one end of Motor 1
4
Ground
Ground pins are connected to ground of circuit (0V)
5
Ground
Ground pins are connected to ground of circuit (0V)
6
Output 2
Connected to another end of Motor 1
7
Input 2
Directly controls the Output 2 pin. Controlled by digital circuits
8
Vcc2 (Vs)
Connected to Voltage pin for running motors (4.5V to 36V)
9
Enable 3,4
This pin enables the input pin Input 3(10) and Input 4(15)
10
Input 3
Directly controls the Output 3 pin. Controlled by digital circuits
11
Output 3
Connected to one end of Motor 2
12
Ground
Ground pins are connected to ground of circuit (0V)
13
Ground
Ground pins are connected to ground of circuit (0V)
14
Output 4
Connected to another end of Motor 2
15
Input 4
Directly controls the Output 4 pin. Controlled by digital circuits
16
Vcc2 (Vss)
Connected to +5V to enable IC function
L293D IC Connection With Arduino:
Direction of rotation as per the control signals is represented in the following table.
Program for clockwise rotation of motor.int oneA = 13;
int twoA = 12;
void setup() {
pinMode(oneA, OUTPUT);
pinMode(twoA, OUTPUT);
}
void loop() {
digitalWrite(oneA, HIGH); // 1A = 1
digitalWrite(twoA, LOW); // 2A = 0
delay(1000); // wait for a second
}Program for anticlockwise rotation of motor.
int oneA = 13;
int twoA = 12;
void setup() {
pinMode(oneA, OUTPUT);
pinMode(twoA, OUTPUT);
}
void loop() {
digitalWrite(oneA, LOW); // 1A = 0
digitalWrite(twoA, HIGH); // 2A = 1
delay(1000); // wait for a second
}
Package Include:
- 1 x L293D IC Dual H-Bridge Motor Driver
SKU: n/a -
Boards and Programmer, Students Corner
Veroboard big
Description
This Stripboard is very strong and durable. The copper layer of the Circuit Board is laminated for easy soldering and to prevent corrosion. you can solder most types of non-surface mount ICs, resistors, capacitors, etc onto them. Prototyping Board is ideal for making college electronics projects
Features And Specification Of PCB Circuit Board For Electronic Project:
- Easy Soldering
- Simple strip layout makes it easy to build complex circuits
- Transfer your breadboard layouts onto a permanent base
- Size = 10cm x 24cm, 100mm X 240mm
- Surface: Copper PCB
- Board Thickness: 1.20mm
Package Include:
- 1x PCB Veroboard Circuit Board
Best online shopping website for BreadBoard Style dotted DIY Printed Circuit PCB VeroBoard 100mm x 240mm Prototype Board Project Board Strip Board Bread Board at a cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan
SKU: n/a -
Sensor And Modules, Students Corner
STM32F4 – ARM Cortex-M4 High-Performance MCUs
- The family of STM32F provides different features but all these controllers use a microcontroller of thirty-two bits. The STM32F4 provides eighty-four megahertz clock speed. has a flash memory of five hundred twelve kilobytes, the static ram of having space of ninety-kilo byte.
- There are numerous pinouts exits on this module which can be operated as inputs and outputs and can also be used to provide programming to the board.
- There are numerous applications provided by this module different categories of communications devices can be attached with this controller for linking of different types of electronic instruments such as detectors, motors. etc.
- This board comprises of numerous other devices used for communication and interfacing of different projects without any use of the external device.
- This module also comes with some other components such as digital to analog converter, analog to digital converter, the port of sound, all these components make is the complete board.
Features of STM32F4
- These are some important features of STM32F4 which are described here with the detail.
- It comprises of ARM thirty two-bit Cortex central processing unit with a frequency of one eighty megahertz
- It has RAm having space of one ninety kilobytes.
- The flash memory of one megabyte is exited in this module.
- There are functioning voltage range for this module is five volts.
- there is no debugging port exits in it.
- The power supply to this module can be given by the USB port.
- There are 4 user light-emitting diodes that exist on this board in the color range of orange, green, red, and blue.
- There are 2 push buttons that exist on this board first is for reset purpose and the second one is for the user.
SKU: n/a
ColgRoad Top Selling
25W Submersible Water Pump
Specifications:
Attention:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
IP66 100W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 100W |
|
Model |
ZL-TGD-100W |
Power |
100W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 100W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
LED Bulb Raw Material
Specifications:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
Features Of TEC1-12705 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Important Note!! Heat side requires heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”
5M 12V LED Strip NEON Flexible Lights in Pakistan
12V Neon Flexible Strip Light IP65 Rating Size 16*12 5M Length Lamp Material Silica Gel
12V Neon Flexible Strip Lights Specifications:
12V Neon Flexible Strip Lights Features:
Package Include:
1 x 5M 12V LED Strip NEON Flexible Lights
Best Online Shopping Website for 5M 12V LED Strip NEON Flexible Lights Decoration Lights in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
CR2032 3V Coin Cell Battery in Pakistan
LiCB CR2032 or 2032 cell Lithium Coin batteries contain the substance manganese dioxide, which is chemically very stable. with high energy density and high voltage, a single 2032 Lithium Coin battery can replace two, three or more conventional batteries. If you’re looking for CR2032 batteries that are designed to provide reliable and long-lasting power, you’re at the right place.
For More Visit:
Specifications:
Features:
Applications:
Caution:
Package Include:
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95180 |
|
Power |
|
180w |
|
Light source |
|
900 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1700lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
760*290*90mm |
|
|
Battery |
|
3.2V 24AH |
|
Solar Panel Power |
|
6V 24W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95060 |
|
Power |
|
60w |
|
Light source |
|
300 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
800lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
530*240*90mm |
|
Battery |
|
3.2V 12AH |
|
Solar Panel Power |
|
6V 12W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
Main Stem: Cast Iron
Voltage Input: DC12V
Weight: 8lbs
Inlet/ Outlet Port Fitting: 3/4
Rated Power:175w
Rate Current: 13A
Max Flow: 40L/minute
No-Load: 4500RPM
used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
Max Suction Distance:5m
Head:10m
Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
Base Size: 3-1/2″ X 4-1/4″
Power Corded 6ft Aprox
Features:
Package Include:
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
Features:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy.No fluorescent flickering.No hazard of mercury or lead entering the environment.Low power consumption, high intensity, low lumen attenuation.Recessed mounted, maintenance free, easy installation.Solid- state, high shock/ vibration resistant.Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Lumens |
4800 lm |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Surface Treatment |
Oxidation Treatment, Silver Treatment |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Power Factor |
0.90 |
Power Efficiency |
85% |
Features:
Package Include:
50W 5000LM Street Light
HZB
F1 Series LED street light, newest ultra-thin but good heat dissipation design,
simple structure, Streamline design, surface spray treatment, high temperature
resistance, good weather resistance; optimal integration.
Specifications:
Model |
HZB-LD-F1-50W |
||
Power |
50W |
||
Lumens |
5000lm±10% |
||
Size(mm)(LxWxH) |
398*139*50 |
||
Color Temp |
6500K |
||
Operation Temp |
-40°- 60°C |
||
Life Span |
50,000 hours for LED |
||
Driver |
High efficiency driver |
||
Voltage range |
AC110-240V |
||
Frequency |
50/60Hz |
||
Beam Angle |
120 degree |
||
CRI |
>70 |
||
PF |
≥0.90 |
||
Power Efficiency |
≥90% |
Features:
IP66.
Light.
Universal.
Wall or on the Pole.
can be as per your request.
High Quality Aluminum, Rapid Cooling.
Applications:
High ways.
Street, Bridge, Pavement.
Parking Garage, Parking Lot.
School, Residential, Park and Other Outdoor Places.
Package
Include:
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation:
Package Include:
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include: