- Boards, Modules and Accessories, Wireless Communication
Solar Panel 6V 160mA 1W (110×60)
– Compact 6V solar panel rated at 160mA for low-power applications
– Produces approximately 0.96W (marketed as 1W) of output power
– Small 110 x 60 mm form factor for easy integration in DIY projects
– Ideal for battery charging, small solar gadgets, sensors and robotics
– Durable, eco-friendly design built to withstand outdoor use
– Lightweight and affordable option for hobbyists, students and makersSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
L298N Motor Driver Module Dual H-Bridge 5A
Boards, Modules and Accessories, Motors, Drivers and WheelsL298N Motor Driver Module Dual H-Bridge 5A
– Dual H-Bridge design for bidirectional control of two motors
– High power handling up to 5A for demanding DC and stepper motors
– Wide operating voltage: 5V to 35V for flexible motor choices
– Built-in heat sink and protection circuitry for reliable operation
– Easy pinout and simple control interface for Arduino and Raspberry Pi
– Ideal for robotics, automation, RC vehicles, 3D printers, and DIY projectsSKU: n/a - STEM & DIY Learning Kits
4WD Black Acrylic Robot Car Chassis (Imported)
– High-torque 4WD robot car chassis built for rugged and indoor terrain
– Imported acrylic frame with metal supports for strength and low weight
– Four DC geared motors and rubber-tread multi-terrain wheels
– Universal board support: Arduino, Raspberry Pi, NodeMCU and more
– Spacious, optimized layout for sensors, batteries, drivers and AI modules
– Ideal for STEM education, AI rovers, autonomous navigation and hobby buildsSKU: n/a - Batteries, Cells and Power Supply
3.7V 10000mAh 1260110 37Wh LiPo Rechargeable Battery
– High-capacity 10000mAh (37Wh) lithium polymer battery
– Nominal voltage 3.7V for single-cell devices
– Slim rectangular pack: 12mm x 60mm x 110mm (approx.)
– Optional PCM protection for overcharge, over-discharge, and short circuit safety
– Lightweight design ideal for drones, robotics, power banks, and IoT projects
– Rated for 300 to 500 charge cycles depending on usage and conditionsSKU: n/a - Boards, Modules and Accessories, Accessories
JST Male Connector 2.54mm (4-Pin) (Straight / Right Angle)
Boards, Modules and Accessories, AccessoriesJST Male Connector 2.54mm (4-Pin) (Straight / Right Angle)
– JST Male Connector, 2.54mm pitch, 4-pin configuration
– Available in straight and right-angle PCB mounting styles
– Secure metal contacts with corrosion resistance for long life
– Lightweight, compact design for tight spaces and prototyping
– Ideal for Arduino, robotics, drones, RC models, sensors and PCBs
– Compatible with wiring harnesses, prototyping boards and custom cablesSKU: n/a - Boards, Modules and Accessories
Power Inductors (6*8 mm)
- Compact 6×8 mm SMD power inductor ideal for space-constrained PCBs
- High current handling with low DC resistance for efficient power delivery
- Low-profile design reduces EMI and improves voltage regulation
- Perfect for DC-DC converters, voltage regulators, and power supplies
- Surface mount format for easy PCB integration and automated assembly
- Reliable performance for student projects, prototypes, and commercial designs
SKU: n/a - Boards, Modules and Accessories
AC Voltage Sensor (ZMPT101B)
– High-precision ZMPT101B AC voltage sensor module for Arduino and microcontroller projects.
– Accurate AC voltage measurement for home automation, energy monitoring, and IoT systems.
– Easy analog output compatible with Arduino ADC (requires simple calibration).
– Compact, robust module ideal for DIY electronics and industrial monitoring.
– Simple wiring: VCC, GND and analog output to ADC pin for fast integration.
– Available to buy online in Pakistan for fast delivery and reliable performance.SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
DC Gear Motor with Encoder 280RPM & 620RPM (GA25-370) (Complete Kit)
Boards, Modules and Accessories, Motors, Drivers and WheelsDC Gear Motor with Encoder 280RPM & 620RPM (GA25-370) (Complete Kit)
- Dual speed options: 280 RPM and 620 RPM for flexible performance
- Integrated encoder for accurate speed and position feedback
- High torque in a compact 25 x 37 mm housing
- Durable construction for reliable long-term use
- Complete kit with mounting bracket, screws, wiring harness and 65 mm wheel
- Ideal for robotics, automation and hobbyist projects
SKU: n/a - Boards, Modules and Accessories
18650 Li-Ion Battery Pure Nickel Strip (1P) in 1 Meter Length
– 1 meter roll of 100% pure nickel strip, ideal for 18650 Li-Ion cells
– 0.15 mm thickness for optimal balance of flexibility and strength
– Designed for spot welding: low-resistance, reliable connections
– Corrosion-resistant and heat-tolerant for long-lasting battery packs
– Cuts cleanly with scissors or shears; perfect for DIY and professional buildsSKU: n/a - Boards, Modules and Accessories, Accessories
Zener Diode 1W
- Stable voltage regulation for sensitive circuits
- 1W power rating for moderate power applications
- Low voltage drop for improved circuit efficiency
- Ideal for power supplies, voltage regulators and clipping circuits
- Durable construction for long-lasting performance
- Available with fast shipping in Islamabad
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
3-Axis Accelerometer Module GY-521 MPU-6050
- 6-axis motion tracking: Integrated 3-axis accelerometer and 3-axis gyroscope for full motion sensing.
- 16-bit precision: High-resolution ADCs deliver accurate acceleration and rotation data.
- Compact and lightweight: Small 20mm x 16mm form factor and 0.5 g weight for easy integration.
- Easy I2C integration: Standard I2C interface (up to 400 kHz) with selectable address and wide 3.3V–5V support.
- Built-in DMP and interrupts: Onboard Digital Motion Processor and configurable interrupts for efficient motion processing.
- Versatile use cases: Ideal for drones, robotics, wearables, gaming controllers, and motion capture systems.
SKU: n/a - Boards, Modules and Accessories, Wireless Communication
IR Remote Control + Receiver Module (TX/RX)
- Compact IR transmitter and receiver kit ideal for Arduino and DIY projects
- 21-key IR remote included with battery for immediate use
- High-sensitivity HX1838-compatible receiver, digital output
- 38 kHz IR frequency with a reliable 8-10 meter range
- Operates at 3.3V-5V and works with Arduino, ESP32, Raspberry Pi
- Plug and play design for rapid prototyping and home automation
SKU: n/a - Boards, Modules and Accessories, Wireless Communication
Bluetooth Module HC-06
– Easy wireless serial link for Arduino and microcontrollers
– Bluetooth 2.0 SPP with default 9600 bps
– Up to 10 meter range for short-distance projects
– Compact 27mm x 13mm module; breadboard friendly
– Works with Arduino, Raspberry Pi, STM32 and Android
– Low current draw (30-40mA when connected)
– Simple wiring: VCC, GND, TXD, RXD, StateSKU: n/a - Boards, Modules and Accessories, Display Modules and LCDs
OLED 0.96 Inch Display Module
- 0.96 inch compact OLED display with crisp, high-contrast visuals
- Available in 128×64 or 96×64 resolutions depending on model
- I2C and SPI interface options for easy microcontroller integration
- Ultra-low power consumption ideal for battery-powered projects
- Self-illuminated monochrome OLED – no backlight required
- Perfect for Arduino, Raspberry Pi, ESP32, wearables, and IoT devices
SKU: OLED-0.96 - Boards, Modules and Accessories, Batteries, Cells and Power Supply
Li-ion Lithium Battery Charging Protection Module (TP4056)
Boards, Modules and Accessories, Batteries, Cells and Power SupplyLi-ion Lithium Battery Charging Protection Module (TP4056)
- Single-cell Li-ion/LiPo charger ideal for DIY and portable projects
- Integrated protection: overcharge, over-discharge, short circuit, reverse polarity
- Micro USB 5V input for easy charging from standard USB adapters
- LED indicators show charging and full-charge status
- High-efficiency TP4056 IC with low heat generation, up to 1A charge current
- Compact, lightweight board for power banks, LED projects, and small electronics
SKU: n/a - Soldering Tools, Tech Tools and Instruments
Soldering Iron 220V 30W/40W/60W
- Available in 30W, 40W or 60W to match delicate or heavy soldering jobs
- Fast-heating ceramic core for quick temperature readiness
- Ergonomic, heat-resistant handle for comfort during long sessions
- Fine-point precision tip for detailed PCB and component work
- Durable construction for reliable, long-term performance
- Great for electronics repair, wiring, PCB assembly and DIY projects
SKU: n/a - Accessories
1-Slot Type-C Lithium Battery Charger (16340/14500/18650 Cells)
– Single-slot charger for one lithium-ion cell: compatible with 16340, 14500, and 18650
– USB Type-C input for universal, reliable charging from adapters, laptops, or power banks
– Auto-adjust charging current (0.5A to 1A) for safe and efficient charging
– LED status indicator: Red = Charging, Green = Fully Charged
– Multiple safety protections including overcharge, short-circuit, overheat, reverse polarity, and over-discharge recovery
– Compact ABS housing with spring-loaded contacts for secure battery placement and portabilitySKU: n/a


- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 99 products sold
- On College Road from 2025
- Owner: Sharafat Shahzad



















