- Integrated Circuits (ICs)
7486 Quad 2-Input XOR Gate IC (DIP)
- Quad 2-input XOR gates in a single DIP-14 package
- Standard TTL logic (74xx) with typical +5V operation
- Fast switching and reliable logic thresholds for digital circuits
- Ideal for parity generation, adders, encoders, and error detection
- Breadboard and PCB friendly DIP-14 package for prototyping
- Interfaces easily with other TTL/CMOS logic with proper level considerations
SKU: n/a - Integrated Circuits (ICs)
7485 4-Bit Magnitude Comparator IC (DIP)
– Compares two 4-bit binary numbers (A and B)
– Outputs A B logic signals
– TTL-compatible logic levels for reliable operation
– Cascadable design for comparisons of larger bit-widths
– DIP package ideal for breadboards and prototyping
– Suitable for sorting, ALU functions, and decision circuitsSKU: n/a - Integrated Circuits (ICs)
7483 4-Bit Binary Full Adder IC (DIP)
- Performs fast 4-bit binary addition with carry input and carry output.
- TTL logic family for reliable digital performance.
- Contains four cascaded full adders for A0-A3 and B0-B3 inputs.
- Standard 16-pin Dual In-line Package (DIP) for breadboards and PCBs.
- Ideal for ALUs, calculators, microprocessor projects, and learning labs.
- Easy to cascade multiple ICs for wider bit-width arithmetic.
SKU: n/a - Integrated Circuits (ICs)
7476 Dual JK Flip-Flop IC (DIP)
– Dual JK flip-flops in a single 14-pin DIP package
– Edge-triggered operation for precise state changes
– Asynchronous preset and clear inputs for fast control
– Compatible with standard TTL logic families
– Ideal for counters, shift registers, and memory elements
– Breadboard- and PCB-friendly through-hole packageSKU: n/a - Integrated Circuits (ICs)
7475 4-Bit Bi-Stable Latch IC (DIP)
– 4 independent bistable latches for storing four bits of digital data
– TTL-compatible logic design for broad system compatibility
– Level-sensitive latch operation with enable control for reliable timing
– Fast switching and stable performance for sequential circuits
– Standard 14-pin DIP package, breadboard-friendly for prototyping
– Ideal for buffering, registers, counters, and educational projectsSKU: n/a - Integrated Circuits (ICs)
7474 Dual D-Type Flip-Flop IC (DIP)
- Dual independent edge-triggered D-type flip-flops in a single DIP-14 package.
- Captures and stores the D input on the rising edge of the clock.
- Asynchronous Preset (PR) and Clear (CLR) inputs for forced set/reset.
- Complementary Q and Q9 outputs for true and inverted signals.
- Standard TTL operation at +5V with fast switching and low propagation delay.
- Breadboard and PCB friendly 14-pin DIP, easy interfacing with 74xx logic.
SKU: n/a - Integrated Circuits (ICs)
7447 BCD to 7-Segment Decoder/Driver IC (DIP)
- Converts 4-bit BCD (A, B, C, D) into seven-segment outputs for digits 0-9.
- Designed for common-anode 7-segment LED displays.
- Open-collector, active-LOW segment outputs (a–g) to directly sink current with resistors.
- TTL-compatible inputs and fast switching at 5 V supply.
- Includes LT (Lamp Test), BI̅ (Blanking Input), and RBI/RBO for blanking and leading-zero suppression.
- Breadboard-friendly DIP-16 package for rapid prototyping and educational projects.
SKU: n/a - Integrated Circuits (ICs)
7432 Quad 2-Input OR Gate IC (DIP)
– Quad (4x) independent 2-input OR gates in a single DIP package
– TTL compatible, operates at standard +5V logic levels
– Fast switching and reliable output for digital circuits
– Low power consumption ideal for prototypes and learning
– Breadboard-friendly DIP package for easy prototyping
– Suitable for embedded systems, automation, and educational projectsSKU: n/a - Integrated Circuits (ICs)
7408 Quad 2-Input AND Gate IC (DIP)
- Four independent 2-input AND gates in a single DIP-14 package
- Standard TTL 74xx family device; operates on 5V supply
- High-speed switching for dependable digital logic performance
- Inputs and outputs compatible with common TTL and CMOS devices
- Breadboard- and PCB-friendly DIP-14 package for easy prototyping
- Ideal for education, lab kits, microcontroller interfacing, and control logic
SKU: n/a - Integrated Circuits (ICs)
7404 Hex Inverter NOT Gate IC (DIP)
- 7404 Hex Inverter NOT Gate IC with six independent logic inverters
- TTL 74xx family, standard-performance logic for reliable results
- Operates from 4.75 V to 5.25 V (typical 5 V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- High-speed switching for waveform shaping and timing circuits
- Ideal for prototyping, educational labs, and DIY electronics projects
SKU: n/a - Integrated Circuits (ICs)
7402 Quad 2-Input NOR Gate IC (DIP)
- Quad 2-input NOR gate IC (4 independent gates per chip)
- TTL 74xx family device for reliable, high-speed logic operation
- Operates from 4.75V to 5.25V (typical 5V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- Universal logic gate — can implement AND, OR, NOT, NAND, XOR, XNOR
- Ideal for students, hobbyists, engineers, and lab prototyping
SKU: n/a - Integrated Circuits (ICs)
7400 Quad 2-Input NAND Gate IC (DIP)
– Quad 2-input NAND gate IC: four independent 2-input NANDs per 14-pin chip
– TTL logic family (74xx) for reliable digital performance
– Wide operating voltage: 4.75V to 5.25V (typical 5V supply)
– Fast switching, ideal for prototyping and educational use
– Standard 14-pin DIP package, breadboard and PCB friendly
– Versatile universal gate: can implement AND, OR, NOT and other functions using NAND combinationsSKU: n/a - Integrated Circuits (ICs)
LM741 / UA741 Operational-Amplifier IC (DIP)
- General-purpose LM741 / UA741 operational amplifier in a standard DIP package
- Designed for signal amplification, conditioning, and analog processing
- Perfect for active filters, oscillators, and comparator circuits
- Breadboard-friendly DIP form factor for prototyping and education
- Wide supply range: ±5V to ±18V; supports single and dual supply operation
- Internally frequency-compensated and includes short-circuit protection
SKU: n/a - Integrated Circuits (ICs)
LM386 Audio Power Amplifier IC (DIP)
– Compact LM386 audio power amplifier in a standard DIP package
– Operates from low-voltage supplies (4V to 12V, up to 18V)
– Delivers up to 1W into an 8Ω speaker
– Built-in gain of 20×, adjustable to 200× with external components
– Low quiescent current ideal for battery-powered projects
– Minimal external components; great for DIY and student projectsSKU: n/a - Integrated Circuits (ICs)
ULN2003 Stepper Motor Driver IC (DIP)
– 7 Darlington transistor arrays in one DIP IC
– Each channel sinks up to 500 mA and withstands 50 V
– Built-in freewheeling diodes for inductive load protection
– Open-collector outputs compatible with TTL and CMOS
– Standard DIP package ideal for breadboards and prototyping
– Ideal for stepper motors, relays, solenoids, and LED driversSKU: n/a - Integrated Circuits (ICs)
LM339 Quad Comparator IC (DIP)
– Four precision voltage comparators in a single DIP package
– Open-collector outputs for direct digital logic interfacing
– Wide operating voltage: 2V to 36V (single) or ±1V to ±18V (dual)
– Low power consumption, suitable for battery-powered designs
– Fast response and high precision for voltage and signal detection
– Standard DIP footprint for easy prototyping and breadboard useSKU: n/a - Integrated Circuits (ICs)
LM393 Dual Comparator IC (DIP)
- Dual precision voltage comparators in a single DIP package
- Wide supply range: 2V to 36V (single supply) or ±1V to ±18V (dual supply)
- Open-collector outputs for easy logic interfacing
- Low power consumption, ideal for battery-powered projects
- Fast response and high accuracy for threshold detection
- Breadboard-friendly DIP package for prototyping and education
SKU: n/a - Integrated Circuits (ICs)
LM358 Dual Low Power Operational-Amplifier IC (DIP)
- Dual operational amplifiers in a single DIP package
- Low power consumption for battery-powered projects
- Single-supply operation: 3V to 32V (or ±1.5V to ±16V)
- Internally frequency-compensated for stable performance
- Wide output voltage swing with high gain for signal amplification
- Breadboard-friendly DIP package for prototyping and PCB use
SKU: n/a
- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 23 products sold
- On College Road from 2025
- Owner: Sharafat Shahzad
