High-Performance M3 Nylon Hex Spacers for Electronics and Robotics
These M3 double-pass hex nylon spacers provide reliable insulation, spacing, and mechanical support for printed circuit boards and electronic assemblies. Manufactured from high-quality nylon, they combine strength with electrical isolation for safe, long-lasting builds.
Key Features
- Durable nylon material: non-conductive, shock resistant, and heat tolerant for electronics use.
- M3 double-pass threading: threaded on both ends to enable secure stacking and modular assembly.
- Hexagonal body: improved grip for hand tightening and wrench access to prevent rotation during installation.
- Multiple length options: 10mm, 15mm, 20mm, 25mm, 30mm and 35mm to suit varied spacing requirements.
- Lightweight and corrosion-free: will not rust and is ideal for long-term projects in varied environments.
Design and Compatibility
The M3 double-pass hex nylon spacer is designed for compatibility with standard M3 screws and bolts used in PCB mounting, mechanical frames, and component stacking. The hexagonal profile allows easy tool engagement for quick, secure tightening without damaging surrounding components.
Technical Specifications
- Material: Nylon (plastic) – non-conductive
- Thread size: M3 (compatible with all M3 fasteners)
- Available lengths: 10mm, 15mm, 20mm, 25mm, 30mm and 35mm
- Finish: Natural nylon, lightweight and rust-free
Common Applications
- PCB standoffs and spacing for single or multi-layer boards
- Drone and robotics assemblies where weight and insulation matter
- Arduino and Raspberry Pi prototyping and shield stacking
- 3D printer frames, sensor mounting, and school electronics kits
- Laboratory kits and local engineering projects in Pakistan
Installation and Use
- Select the appropriate spacer length for the clearance required between components.
- Insert an M3 screw through the PCB or mounting plate and thread into one end of the spacer.
- For stacked assemblies, thread a second M3 screw into the opposite end to secure the next board or component.
- Use a small wrench or pliers on the hex body if additional torque is required; avoid overtightening plastic threads.
Why Choose These M3 Nylon Hex Spacers
- Provide safe electrical isolation to prevent short circuits
- Resist corrosion and maintain clean, professional finishes over time
- Trusted in Pakistan engineering labs and electronics retailers for reliability in educational and professional builds
- Quick to install with standard tools and M3 fasteners
Ordering and Availability
Choose the length you need from the available options and add to your cart for immediate use in prototyping, repairs, or production builds. These spacers are suitable for single purchases or bulk orders for workshops and classrooms.
Note: Images are for Illustration Purposes Only.
Which length of M3 nylon hex spacer should I pick?
Pick the length that matches the gap you need to hold between your board and the mounting surface. Our M3 nylon hex spacer comes in 10mm, 15mm, 20mm, 25mm, 30mm and 35mm, and each one is priced at Rs. 10.
A quick way to decide:
- 10mm or 15mm: tight builds such as stacked Arduino or Raspberry Pi shields, small sensor boards and compact drone frames.
- 20mm or 25mm: general PCB mounting where you want room for wiring and connectors underneath.
- 30mm or 35mm: taller standoffs for multi-layer stacks, 3D printer frames and chassis where components need clear space.
All six lengths share the same M3 thread and hex body, so you can mix sizes in one build. Order a few of each if you are still prototyping, and keep a spare set in your project box.
How do I install an M3 double-pass hex spacer?
Thread an M3 screw through your board or plate into one end of the spacer, then use the second threaded end to fix the next board or a nut. The double-pass design means both ends take a screw, so stacking is simple.
- Mark and drill your mounting holes to suit M3 screws.
- Pass an M3 screw through the PCB and thread it into one end of the spacer.
- For a stack, thread a second M3 screw into the opposite end and fix the next board.
- Hold the hex body with a small wrench or pliers if you need extra grip, and stop before the plastic threads feel tight.
Nylon is non-conductive, so the spacer also isolates the board from the chassis. Pair it with our tactile push button switch or 5mm LEDs when you mount a control panel, and browse the full Accessories range for other build parts.
What do I get when I order these nylon spacers?
- M3 double-pass hexagonal nylon spacers in the length you select: 10mm, 15mm, 15mm, 20mm, 25mm, 30mm or 35mm.
- Natural finish nylon bodies, non-conductive and rust-free.
- M3 threading on both ends for stacking and modular assembly.
- Quantity as per the option you add to your cart, at Rs. 10 each.
Screws are not included, so order M3 screws separately if you do not have them in your parts box. We deliver nationwide across Pakistan at a flat shipping rate of Rs 350, and our shop is on College Road, Rawalpindi if you prefer to visit. Message us with your project details and we will confirm stock and the right lengths for your build.
Frequently Asked Questions
Are these M3 nylon hex spacers safe to use near live circuits?
Yes. The nylon body is non-conductive, so the spacer insulates the board from the chassis and helps prevent short circuits. That makes it a good choice for PCB mounting, drone frames and robotics builds where metal standoffs could bridge contacts. Keep the thread clean and avoid overtightening so the plastic stays intact.
Can I stack two M3 nylon hex spacers to get a longer standoff?
You can. Because the spacer is double-pass threaded on both ends, an M3 screw can join two spacers end to end for extra height. This is handy when you need a gap longer than 35mm. Use a screw long enough to engage both threads properly, and check the stack is firm before mounting a board on top.
Do these spacers fit standard M3 screws and bolts?
Yes. Every length uses the standard M3 thread, so ordinary M3 screws, bolts and nuts fit both ends. That covers most PCB, Arduino, Raspberry Pi, 3D printer and robotics hardware. If your build uses a different thread, tell us what you are mounting and we will point you to the right part.
How much does an M3 nylon hex spacer cost and how is it delivered?
Each spacer is Rs. 10, whatever length you choose from 10mm to 35mm. We ship nationwide across Pakistan at a flat rate of Rs 350. For bulk orders for a classroom or workshop, message us with the lengths and quantities you need and we will confirm availability and the total.
Where can I buy these spacers in Rawalpindi?
You can order online from colgroad.com or visit our shop on College Road, Rawalpindi. We keep spacers for students, hobbyists and engineers working on school, college and university projects, and we are happy to help you choose lengths. Bring your board or send us a photo and we will guide you.













Muhammad Hashim (verified owner) –
Muhammad Hashim –
Anonymous (verified owner) –
Anonymous –