The N20 Mini DC Gear Motor is a compact, high-performance, and durable motor designed for precision control in robotics and electronics projects. Its small size combined with powerful torque output makes it an ideal choice for robotic cars, automatic locks, smart devices, and mechatronics applications where space efficiency and performance are crucial.
This motor features a metal gearbox that ensures strength, reliability, and long service life. It operates efficiently at low voltages and offers multiple RPM options (200, 400, 600, 800, and 1000), allowing users to select the perfect balance between speed and torque depending on their project requirements.
Features:
- High Precision Metal Gearbox: Provides durability, smooth operation, and high torque output.
- Multiple Speed Options: Available in 200, 400, 600, 800, and 1000 RPM variants to suit a wide range of applications.
- Low Power Consumption: Operates efficiently at 6V DC, making it suitable for battery-powered devices.
- Compact and Lightweight Design: Perfect for miniature robots, actuators, and embedded systems.
- High Reliability: Designed for long operational life with minimal noise and vibration.
- Easy Integration: Standard mounting holes and output shaft make installation simple and flexible.
- Reversible Rotation: Motor direction can be changed easily by reversing the polarity.
Applications:
- Mini robots and robotic cars
- Smart locks and automation systems
- Arduino and embedded projects
- Actuators and precision control systems
- DIY electronics and prototyping
Note: Images are for Illustration Purposes Only.
Which RPM version of the N20 mini DC gear motor should I pick?
Pick the lowest RPM you can live with. Lower RPM means more torque at the same voltage, and the N20 gearbox is small, so torque is the limit in most builds.
As a rough guide for the four variants on this page:
- 200 RPM – wheels on a small robot car, anything that has to push weight or climb.
- 400 RPM – the middle option, good for line followers and general driving.
- 600 RPM – faster cars where the chassis is light.
- 800 RPM – faster cars where the chassis is light.
- 1000 RPM – light loads only, such as spinning a small fan or a fast actuator.
The motor runs from 6V DC, so you can also fine-tune speed with the supply voltage. Keep in mind that a higher voltage also raises the current draw. If you are not sure, buy two different RPM versions and test both on your chassis before you commit to a full set.
How do I install and wire an N20 mini DC gear motor?
It is a two-wire DC motor, so wiring is simple. Connect the two terminals to your driver or supply; swap the wires to reverse the direction of rotation.
- Mount the motor through the standard mounting holes on your chassis or bracket.
- Press a wheel or coupling onto the output shaft.
- Connect the terminals to a motor driver, not directly to an Arduino or ESP32 pin.
- Test at low voltage first, then raise it if you need more speed.
For the control side, a tactile push button switch works well as a start or direction input, and 20cm male-to-female jumper wires make the board-to-driver connections without soldering. Add a 5mm LED if you want a simple power or status indicator. All of these sit in the same Boards, Modules and Accessories range.
College Road Electronics is on College Road, Rawalpindi, and ships nationwide across Pakistan at a flat rate of Rs 350. Students building school, college or university projects can ask for guidance on choosing the right motor and driver.
Frequently Asked Questions
How much does the N20 mini DC gear motor cost?
The N20 mini DC gear motor is priced at Rs. 450. The price was checked in September 2026. It is a low-cost part, so buying two or three RPM versions to test on your chassis is practical. Delivery is nationwide across Pakistan at a flat rate of Rs 350.
What voltage does the N20 mini DC gear motor run on?
It operates from 3V to 12V DC, so it suits battery-powered builds as well as bench supplies. The listing title says 6V, which is a good working point for the 200, 400, 600 and 1000 RPM variants. Raising the voltage increases speed and current draw, so check your driver can handle it.
Can I reverse the direction of the N20 mini DC gear motor?
Yes. It is a plain two-wire DC motor, so reversing the polarity reverses the rotation. In practice you do this with an H-bridge or motor driver module rather than by rewiring the terminals each time. Never connect the motor directly to an Arduino, ESP32 or Raspberry Pi GPIO pin.
What can I use the N20 mini DC gear motor for?
Common uses include mini robots and robotic cars, smart locks and automation systems, actuators, precision control systems, and general Arduino and embedded projects. Its metal gearbox and small size suit builds where space is tight and you still need useful torque. It also works for DIY electronics and prototyping work.
Does the N20 mini DC gear motor come with mounting hardware?
The motor has standard mounting holes and an output shaft, which makes fitting it to a chassis or bracket straightforward. Check the product images and description for what is included in the pack. If you need a specific bracket or coupling, ask before ordering so you get the right part first time.













Ashir (verified owner) –
Ashir –
Abdullah K. (verified owner) –
Abdullah K. –