-
Batteries, Cells and Power Supply, Boards, Modules and Accessories
LiPo Battery Charging Module 2A (TP5100)
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesLiPo Battery Charging Module 2A (TP5100)
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devicesSKU: n/a -
Batteries, Cells and Power Supply, Boards, Modules and Accessories
Power Bank Module for 18650 Cells Battery
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesPower Bank Module for 18650 Cells Battery
- Build your own portable power bank using 18650 lithium-ion cells.
- Integrated LCD display for real-time battery charge and voltage readouts.
- Includes rechargeable 18650 module for immediate use.
- Built-in battery management system (BMS) for overcharge, over-discharge and short-circuit protection.
- USB output lets you charge smartphones, tablets and other USB devices.
- Compact, lightweight design ideal for DIY projects and outdoor use.
- Order now for fast delivery in Islamabad.
SKU: n/a -
Boards, Modules and Accessories
18650 Li-Ion Battery Pure Nickel Strip (1P) in 1 Meter Length
– 1 meter roll of 100% pure nickel strip, ideal for 18650 Li-Ion cells
– 0.15 mm thickness for optimal balance of flexibility and strength
– Designed for spot welding: low-resistance, reliable connections
– Corrosion-resistant and heat-tolerant for long-lasting battery packs
– Cuts cleanly with scissors or shears; perfect for DIY and professional buildsSKU: n/a
LiPo Battery Charging Module 2A (TP5100)
In stock
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devices
₨ 180 ₨ 300
In stock
LiPo Battery Charging Module 2A (TP5100) – Product Overview
The LiPo Battery Charging Module 2A (TP5100) is a compact, high-efficiency charger designed specifically for lithium polymer batteries. Engineered for fast, safe charging, the TP5100 is ideal for hobbyists, makers, and product designers who need reliable charging for single-cell (3.7V) and dual-cell (7.4V) LiPo packs.
Key Benefits
- Fast charging up to 2A reduces downtime for battery-powered projects.
- Wide 5V to 18V input range supports USB sources, DC adapters, and solar panels.
- Integrated protections preserve battery life and prevent damage during charging.
- Small form factor allows seamless integration into portable electronics, drones, and DIY systems.
Features of the TP5100 LiPo Battery Charging Module
High-Performance Charging
The TP5100 module delivers up to 2A of charge current using a two-stage CC/CV charging algorithm. In Constant Current (CC) mode it supplies a steady charge current until the cell voltage reaches the target threshold; it then switches to Constant Voltage (CV) mode to top the battery off safely.
Wide Input Voltage Compatibility
Operate the module from a variety of power sources thanks to its 5V to 18V DC input range. This makes the TP5100 suitable for USB powerbanks, wall adapters, bench supplies, and small solar setups.
Battery Compatibility
- Single-cell LiPo: nominal 3.7V
- Dual-cell LiPo: nominal 7.4V
Comprehensive Protection Features
Safety is built in. The module includes:
- Overcharge protection to prevent battery damage when full
- Over-discharge protection to avoid deep discharge
- Short-circuit protection to protect both the battery and the module
- Thermal protection to reduce charge current or shut down if temperatures rise
Status Indicators
Simple LED feedback shows charging and fully charged states, making it easy to monitor progress at a glance during development or field use.
Technical Specifications
- Model: TP5100 LiPo Battery Charging Module
- Maximum Charging Current: 2A
- Input Voltage: 5V to 18V DC
- Battery Compatibility: Single-cell (3.7V) and Dual-cell (7.4V) LiPo
- Charging Modes: Constant Current (CC) and Constant Voltage (CV)
- Protections: Overcharge, Over-discharge, Short-circuit, Thermal
- Status Indicators: LEDs (charging / fully charged)
- Form Factor: Compact PCB module for easy integration
Applications
- DIY electronics and maker projects
- Portable and wearable devices
- Drones, RC vehicles, and hobby electronics
- Solar-powered battery charging systems
- Battery-powered prototypes and embedded systems
Installation and Usage Tips
- Verify battery cell count and wiring before connecting to avoid incorrect voltage selection.
- Use an appropriate power source within the 5V to 18V range to ensure stable charging.
- Monitor initial charges to confirm LED indications and expected charging behavior.
- Ensure adequate ventilation if charging at high current to help manage heat.
- For long-term installations, consider adding a fuse or PTC for additional safety.
Why Choose the TP5100 LiPo Battery Charging Module
The TP5100 combines fast 2A charging performance with robust safety features and flexible input compatibility. Its compact size and high efficiency make it a top choice for anyone needing a reliable LiPo charging solution in compact or portable projects.
Note: Images are for illustration purposes only.
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.83 rating from 572 reviews
-
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (3-Pin)
- 15cm JST PH Female Connector Cable with 3-pin configuration and 2.0mm pitch
- Pre-wired harness cable for plug-and-play signal and low-power DC connections
- Compatible with Arduino, ESP32, sensors, robotics, drones, and IoT applications
- Features secure locking system to prevent accidental disconnection during operation
- Flexible stranded copper wires with PVC insulation for easy routing in tight spaces
- Supports up to 2A per line, ideal for power + signal + ground configurations
- No soldering required on connector side for quick prototyping and development
SKU: n/a -
Boards, Modules and Accessories, Accessories
2-Pin On/Off Rocker Switch (Big)
– SPST 2-pin rocker switch for simple ON/OFF control
– Large rocker actuator for easy, tactile operation
– Snap-in panel mount for fast, secure installation
– Durable plastic body with metal contacts for long life
– Suitable for high-load, low-voltage applications
– Ideal for DIY projects, appliances, automotive and control panelsSKU: n/a -
Boards, Modules and Accessories
RS422-TTL Full Duplex MAX490 to TTL Module
– Full-duplex RS422 to TTL conversion using the MAX490 transceiver
– Bidirectional, stable data transfer for long-distance serial links
– Compatible with Arduino, microcontrollers, robotics, UAVs and industrial systems
– Easy integration: TTL-level TX/RX pins plus differential RS422 A/B pairs
– Ideal for serial communication modules, RC systems, IoT and control systems
– Buy online in Pakistan for fast delivery and reliable signal conversionSKU: n/a -
Batteries, Cells and Power Supply
12V 2.5A Rechargeable Li-Ion Battery 11.1V Battery 18650 cell Battery
Batteries, Cells and Power Supply12V 2.5A Rechargeable Li-Ion Battery 11.1V Battery 18650 cell Battery
– Nominal 11.1V output (12.6V fully charged) compatible with 12V systems.
– Rated continuous current: 2 A for steady power delivery.
– Built with 18650 Li-Ion cells for high energy density and low weight.
– Rechargeable pack with long cycle life and low self-discharge.
– Integrated protection against over-charge, over-discharge, and short circuits.
– Compact, portable battery pack ideal for robotics, IoT, CCTV, and DIY projects.SKU: n/a -
Boards, Modules and Accessories, Motors, Drivers and Wheels
L293D 4-Channel Motor Driver Module
– Dual H-bridge driver for two DC motors or one bipolar stepper motor
– Logic-level inputs compatible with Arduino and Raspberry Pi
– Built-in flyback diodes and thermal protection for reliable operation
– Supports motor voltages up to 36V; ~600 mA continuous per channel, 1.2 A peak
– Simple PWM speed control and direction reversal
– Compact breakout with screw terminals and header pins for easy wiringSKU: n/a -
Accessories
15cm JST Female Connector Cable 2.54mm Pitch (6-Pin)
- 6-pin JST female connector cable with standard 2.54mm pitch for universal compatibility
- 15cm cable length ideal for compact electronics projects and robotics applications
- Female-to-female design for easy plug-and-play connection to PCB headers
- Multi-core stranded copper wire construction for reliable signal and power transmission
- Perfect for Arduino, ESP32, sensors, motor drivers, and embedded systems
- Secure locking fit prevents accidental disconnection during operation
SKU: n/a
Related products
-
Boards, Modules and Accessories, Sensors And Modules
I2C Bi-Directional Logic Level Converter Module
- Bi-directional level shifting for safe two-way communication between different voltage domains.
- Optimized for I2C but also supports UART, SPI and One-Wire protocols.
- Wide voltage support: converts between 1.8V, 2.8V, 3.3V and 5V logic levels.
- Compact, 4-channel design — space-efficient and ideal for multi-signal projects.
- High-speed operation for reliable, fast data transfer.
- Plug-and-play — no configuration required; protects low-voltage devices from higher voltages.
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
AS608 Fingerprint Reader Optical Sensor Module
- Optical fingerprint capture for accurate biometric identification
- Compact, low-power design ideal for embedded systems and IoT devices
- Easy serial/UART integration with Arduino, Raspberry Pi, STM32 and other MCUs
- Fast enrollment and verification with onboard template management
- Durable touch surface rated for repeated daily use
- Developer-friendly with example code and rapid prototyping support
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
5V 2-Channel Arduino Relay Module Board
– Dual-channel relay board to control two independent high-power circuits
– Compatible with Arduino, Raspberry Pi, ESP32 and most microcontrollers
– Switches typical loads up to 10A (250VAC / 30VDC) per channel
– Onboard LEDs and screw terminals for secure wiring and status feedback
– Selectable low-level or high-level trigger with opto-isolation jumper for safer interfacing
– Compact PCB footprint ideal for home automation, robotics, IoT, and industrial projectsSKU: n/a -
Boards, Modules and Accessories, Boards and Programmers
NodeMCU ESP8266 Wi-Fi Module V3 (CH340)
- Easy-to-use NodeMCU board with ESP8266 Wi-Fi and built-in CH340 USB-to-serial for plug-and-play programming
- Ideal for IoT prototyping with low power consumption and rich GPIO, ADC, PWM, I2C, SPI support
- Compatible with Arduino IDE and NodeMCU/Lua firmware for fast development
- Breadboard-friendly 30-pin layout and onboard 3.3V regulator, powered via micro USB
- Approximately 4MB onboard flash for storing firmware and files
- Low cost with a large community, extensive libraries, and tutorials
SKU: n/a
Reviews
There are no reviews yet