-
Batteries, Cells and Power Supply, Boards, Modules and Accessories
LiPo Battery Charging Module 2A (TP5100)
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesLiPo Battery Charging Module 2A (TP5100)
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devicesSKU: n/a -
Batteries, Cells and Power Supply, Boards, Modules and Accessories
Power Bank Module for 18650 Cells Battery
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesPower Bank Module for 18650 Cells Battery
- Build your own portable power bank using 18650 lithium-ion cells.
- Integrated LCD display for real-time battery charge and voltage readouts.
- Includes rechargeable 18650 module for immediate use.
- Built-in battery management system (BMS) for overcharge, over-discharge and short-circuit protection.
- USB output lets you charge smartphones, tablets and other USB devices.
- Compact, lightweight design ideal for DIY projects and outdoor use.
- Order now for fast delivery in Islamabad.
SKU: n/a -
Boards, Modules and Accessories
18650 Li-Ion Battery Pure Nickel Strip (1P) in 1 Meter Length
– 1 meter roll of 100% pure nickel strip, ideal for 18650 Li-Ion cells
– 0.15 mm thickness for optimal balance of flexibility and strength
– Designed for spot welding: low-resistance, reliable connections
– Corrosion-resistant and heat-tolerant for long-lasting battery packs
– Cuts cleanly with scissors or shears; perfect for DIY and professional buildsSKU: n/a
LiPo Battery Charging Module 2A (TP5100)
In stock
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devices
₨ 180 ₨ 300
In stock
LiPo Battery Charging Module 2A (TP5100) – Product Overview
The LiPo Battery Charging Module 2A (TP5100) is a compact, high-efficiency charger designed specifically for lithium polymer batteries. Engineered for fast, safe charging, the TP5100 is ideal for hobbyists, makers, and product designers who need reliable charging for single-cell (3.7V) and dual-cell (7.4V) LiPo packs.
Key Benefits
- Fast charging up to 2A reduces downtime for battery-powered projects.
- Wide 5V to 18V input range supports USB sources, DC adapters, and solar panels.
- Integrated protections preserve battery life and prevent damage during charging.
- Small form factor allows seamless integration into portable electronics, drones, and DIY systems.
Features of the TP5100 LiPo Battery Charging Module
High-Performance Charging
The TP5100 module delivers up to 2A of charge current using a two-stage CC/CV charging algorithm. In Constant Current (CC) mode it supplies a steady charge current until the cell voltage reaches the target threshold; it then switches to Constant Voltage (CV) mode to top the battery off safely.
Wide Input Voltage Compatibility
Operate the module from a variety of power sources thanks to its 5V to 18V DC input range. This makes the TP5100 suitable for USB powerbanks, wall adapters, bench supplies, and small solar setups.
Battery Compatibility
- Single-cell LiPo: nominal 3.7V
- Dual-cell LiPo: nominal 7.4V
Comprehensive Protection Features
Safety is built in. The module includes:
- Overcharge protection to prevent battery damage when full
- Over-discharge protection to avoid deep discharge
- Short-circuit protection to protect both the battery and the module
- Thermal protection to reduce charge current or shut down if temperatures rise
Status Indicators
Simple LED feedback shows charging and fully charged states, making it easy to monitor progress at a glance during development or field use.
Technical Specifications
- Model: TP5100 LiPo Battery Charging Module
- Maximum Charging Current: 2A
- Input Voltage: 5V to 18V DC
- Battery Compatibility: Single-cell (3.7V) and Dual-cell (7.4V) LiPo
- Charging Modes: Constant Current (CC) and Constant Voltage (CV)
- Protections: Overcharge, Over-discharge, Short-circuit, Thermal
- Status Indicators: LEDs (charging / fully charged)
- Form Factor: Compact PCB module for easy integration
Applications
- DIY electronics and maker projects
- Portable and wearable devices
- Drones, RC vehicles, and hobby electronics
- Solar-powered battery charging systems
- Battery-powered prototypes and embedded systems
Installation and Usage Tips
- Verify battery cell count and wiring before connecting to avoid incorrect voltage selection.
- Use an appropriate power source within the 5V to 18V range to ensure stable charging.
- Monitor initial charges to confirm LED indications and expected charging behavior.
- Ensure adequate ventilation if charging at high current to help manage heat.
- For long-term installations, consider adding a fuse or PTC for additional safety.
Why Choose the TP5100 LiPo Battery Charging Module
The TP5100 combines fast 2A charging performance with robust safety features and flexible input compatibility. Its compact size and high efficiency make it a top choice for anyone needing a reliable LiPo charging solution in compact or portable projects.
Note: Images are for illustration purposes only.
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.83 rating from 572 reviews
-
Boards, Modules and Accessories, Motors, Drivers and Wheels
Mini DC Water Pump 5-9V (Non-Submersible)
Boards, Modules and Accessories, Motors, Drivers and WheelsMini DC Water Pump 5-9V (Non-Submersible)
- Works with 5V to 9V DC power supply
- Non-submersible design for placement outside the water source
- Compact and lightweight plastic housing for easy mounting
- Low power consumption and quiet operation
- Compatible with Arduino and Raspberry Pi for automation
- Ideal for DIY plant watering and small water circulation projects
- Suitable for indoor fluid control systems and educational experiments
SKU: n/a -
Accessories
15cm JST Female Connector Cable 2.0mm Pitch (5-Pin)
- 5-Pin JST PH Female Connector with 2.0mm pitch for multi-signal connections
- 15cm cable length ideal for compact electronics and robotics projects
- Pre-crimped plug-and-play design requires no soldering on connector side
- Supports up to 2A per line for power and signal transmission
- Compatible with JST PH male headers on Arduino, ESP32, drones, and sensor modules
- Secure locking mechanism prevents accidental disconnection
- Flexible stranded copper wires with PVC insulation for easy routing
SKU: n/a -
Boards, Modules and Accessories
Hi-Link Power Supply 5V (5W) / 12V (3W / 5W)
– Stable regulated output: choose 5V 5W or 12V 3W / 5W models
– Wide AC input range: 90-264V AC to reliable DC output
– Built-in protections: over-voltage, short-circuit and thermal protection
– Ultra-compact PCB module ideal for embedded power supply designs
– Efficient Hi-Link switching converter for low heat and long service life
– Perfect for DIY, home automation, industrial electronics and PCB projectsSKU: n/a -
Accessories
10kΩ NTC Thermistor Thermal Resistor (NTC-MF52AT)
- Accurate 10kΩ NTC thermistor (R25 = 10kΩ) for precise temperature sensing
- Negative Temperature Coefficient (NTC) behavior for responsive measurement
- Compact epoxy-coated bead design for fast thermal response and durability
- High stability and repeatability for reliable long-term use
- Easy to integrate into HVAC, battery packs, chargers, 3D printers, and DIY circuits
- Affordable and suitable for both hobbyist and industrial applications
SKU: n/a -
DIY School Kits
T-M74 Hand-Operated Water Pump DIY Learning Kit
– Educational DIY kit that demonstrates the working principle of a manual water pump
– Hands-on STEM learning tool for students, hobbyists, and beginners
– Easy to assemble with no soldering required
– Teaches mechanical motion, suction, and hydraulic pressure concepts
– Durable plastic and mechanical parts for repeated classroom use
– Recommended for ages 8 and above, great for science fairs and demonstrationsSKU: n/a -
Boards and Programmers
ESP32-S3 CAM Development Board with OV3660 Camera Module
- ESP32-S3 dual-core processor running at 240MHz for high-performance AI and IoT applications
- Built-in OV2640 2MP camera module for image capture, video streaming, and face detection
- 16MB Flash + 8MB PSRAM for smooth image processing and larger buffer handling
- Dual USB Type-C ports for easy programming and power without external FTDI adapter
- Wi-Fi 2.4GHz and Bluetooth 5 connectivity for wireless IoT projects
- MicroSD card slot for local storage of images and video recordings
- AI acceleration support ideal for face detection, object recognition, and edge computing tasks
SKU: n/a
Related products
-
Boards, Modules and Accessories, Wireless Communication
SIM900 GSM GPRS Wireless Transmission Module
- SIM900 chipset for stable GSM and GPRS connectivity
- GPRS data rates up to 85.6 kbps for efficient transfer
- Supports voice calls and SMS messaging
- UART (serial) interface for easy Arduino and Raspberry Pi integration
- Compact, durable design suitable for embedded projects
- Operates on 3.4V to 4.4V power supply
SKU: n/a -
Boards, Modules and Accessories, Motors, Drivers and Wheels
L293D 4-Channel Motor Driver Module
– Dual H-bridge driver for two DC motors or one bipolar stepper motor
– Logic-level inputs compatible with Arduino and Raspberry Pi
– Built-in flyback diodes and thermal protection for reliable operation
– Supports motor voltages up to 36V; ~600 mA continuous per channel, 1.2 A peak
– Simple PWM speed control and direction reversal
– Compact breakout with screw terminals and header pins for easy wiringSKU: n/a -
Boards, Modules and Accessories, Wireless Communication
SIM800L GSM GPRS Wireless Transmission Module
Boards, Modules and Accessories, Wireless CommunicationSIM800L GSM GPRS Wireless Transmission Module
- SIM800L chipset delivering GSM and GPRS connectivity
- GPRS data up to 85.6 kbps for efficient transfer
- Supports voice calls and SMS messaging
- Compact, space-saving module ideal for embedded projects
- Low power consumption for battery-operated applications
- Flexible operating voltage: 3.4V to 4.4V with UART interface
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
3-Axis Accelerometer Module Adxl345
- High-precision ADXL345 3-axis motion sensing for tilt, vibration and impact detection
- Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g
- Digital I2C and SPI interfaces for Arduino, Raspberry Pi and microcontrollers
- Low-power operation with configurable power modes for battery projects
- Built-in FIFO, tap/double-tap, activity/inactivity, free-fall and orientation detection
- Compact, breadboard-friendly module ideal for wearables, drones, robotics and IoT
SKU: n/a
Reviews
There are no reviews yet