Overview: JK Inverter BMS V19 8S to 16S 1A 100A Smart BMS
The JK Inverter BMS (V19 firmware) is purpose-built for residential and small commercial solar inverter integration. Unlike the standard JK BMS line, the Inverter BMS series ships with an expanded inverter protocol library covering Deye, Growatt, Voltronic, MPP Solar, Sol-Ark, Pylontech emulation, and more. V19 firmware adds the latest protocol updates and improved CAN bus stability for hybrid solar systems, making it the ideal choice for modern solar energy storage solutions.
Key Features of JK Inverter BMS V19
- Cell configuration range: 8S to 16S (24V to 48V LiFePO4 battery packs)
- Active balancing: 1A continuous for optimal cell health
- Continuous current rating: 100A charge/discharge capacity
- Advanced firmware: V19 with extended inverter protocol library
- Multi-protocol communication: Bluetooth 5.0, RS485, CAN, UART
- Wide inverter compatibility: Deye, Growatt, Voltronic, MPP Solar, Sol-Ark, and more
- Pylontech emulation mode: Ensures broad compatibility with popular inverters
- Comprehensive protection suite: Overvoltage, undervoltage, overcurrent, temperature protection
What Makes the Inverter BMS Different from Standard BMS?
While both lines share the same proven active balancing technology, the Inverter BMS series is specifically optimized for direct CAN/RS485 communication with hybrid solar inverters. This specialized design ensures accurate state-of-charge reporting to your inverter, intelligent charging profiles, and proper integration with battery-aware features like time-of-use scheduling and grid-charge management.
Benefits of Inverter-Specific BMS Design
- Real-time SOC (State of Charge) data transmission to inverter
- Seamless integration with grid-tie and off-grid systems
- Enhanced battery protection through inverter communication
- Support for advanced features like peak shaving and load shifting
- Reduced installation complexity with pre-configured protocols
Technical Specifications
Electrical Parameters
- Battery configuration: 8S to 16S (supports 24V, 36V, and 48V systems)
- Continuous current: 100A charge and discharge
- Active balancing current: 1A per cell
- Voltage range: 24V to 51.2V (LiFePO4 chemistry)
- Power consumption: Less than 50mA in standby mode
Communication and Connectivity
- Bluetooth 5.0 for wireless monitoring via JK BMS mobile app
- RS485 Modbus protocol for inverter communication
- CAN bus support (CAN 2.0B standard)
- UART interface for debugging and advanced configuration
- RJ45 connector for easy cable management
Protection Features
- Overvoltage and undervoltage protection per cell
- Charge and discharge overcurrent protection
- Short circuit protection
- Over-temperature and under-temperature protection
- Cell imbalance protection
- Dual temperature sensor monitoring (included)
Supported Inverter Brands and Protocols
The JK Inverter BMS V19 comes pre-loaded with communication protocols for the most popular solar inverter brands on the market. The V19 firmware update has expanded this library with improved stability and faster data transmission rates.
Compatible Inverter Brands
- Deye: Full protocol support for Deye hybrid inverters
- Growatt: Compatible with Growatt SPH and MOD series
- Voltronic: Supports Axpert and other Voltronic-based inverters
- MPP Solar: Full integration with MPP Solar hybrid units
- Sol-Ark: Certified compatibility with Sol-Ark systems
- Pylontech emulation: Works with any inverter supporting Pylontech batteries
- Generic CAN: Standard CAN protocol for universal compatibility
Recommended Applications and Use Cases
Residential Solar Energy Storage
Perfect for 48V LiFePO4 home solar installations with 3kW to 5kW hybrid inverters. The BMS ensures your battery bank communicates effectively with your inverter for optimal charging and discharging cycles.
Off-Grid and Grid-Tie Battery Systems
Whether you are building a complete off-grid power system or a grid-tie setup with battery backup, the JK Inverter BMS V19 provides the intelligence and protection your system needs.
Time-of-Use Solar Arbitrage
Take advantage of time-of-use electricity rates by storing solar energy during the day and using it during peak rate hours. The BMS integrates seamlessly with inverter scheduling features.
Small Commercial UPS Systems
Ideal for small businesses requiring reliable backup power with solar integration. The 100A continuous rating supports moderate to high power demands.
Installation and Setup Guide
What You Need Before Installation
- LiFePO4 battery pack (8S to 16S configuration)
- Compatible solar hybrid inverter
- Appropriate gauge wiring for 100A current
- JK BMS mobile app (available on iOS and Android)
Basic Installation Steps
- Connect the balance lead harness to your battery pack cells
- Attach the two NTC temperature sensors to your battery bank
- Connect the main power cables (B+ and B-) to battery terminals
- Wire the communication cable (RS485 or CAN) to your inverter
- Power on and configure via Bluetooth using the JK BMS app
- Select your inverter protocol from the V19 firmware menu
- Verify communication between BMS and inverter
What is Included in the Package
- 1 x JK Inverter BMS V19 main unit (8S-16S 1A 100A)
- 2 x NTC temperature sensors with cables
- 1 x Balance lead harness (appropriate for cell configuration)
- 1 x Communication cable with RJ45 connector
- User manual and quick start guide
- Inverter wiring diagrams for popular brands
Why Choose JK Inverter BMS V19?
Advanced Active Balancing Technology
The 1A active balancing ensures all cells in your battery pack remain balanced, extending the overall lifespan of your investment and maintaining optimal performance over thousands of cycles.
Future-Proof Firmware Updates
V19 firmware represents the latest generation of JK BMS software, with ongoing support for new inverter protocols and features. Firmware can be updated via Bluetooth for continuous improvement.
Professional-Grade Communication
Unlike basic BMS units that only provide on/off switching, the JK Inverter BMS provides real-time data to your inverter including voltage, current, SOC, SOH, and temperature, enabling intelligent charging decisions.
Proven Reliability
JK BMS has established itself as a trusted name in the solar energy storage community, with thousands of installations worldwide and active user support forums.
Availability and Warranty in Pakistan
This product is available across Pakistan with fast shipping from Hybrid EV Engineering, Rawalpindi. We offer comprehensive technical support, installation guidance, and a 6-month warranty on all JK BMS units against manufacturing defects.
After-Sales Support
Our team of solar energy specialists is available to assist with:
- Pre-purchase compatibility verification with your existing system
- Installation guidance and troubleshooting
- Firmware configuration and protocol selection
- Custom programming for special applications
- Bulk order discounts and custom configurations
For bulk orders, custom configuration assistance, or compatibility queries with your specific battery pack and inverter combination, please contact us before placing your order. We can help you select the right BMS configuration and ensure seamless integration with your solar energy storage system.
Reviews
There are no reviews yet