- Boards, Modules and Accessories, Boards and Programmers
Arduino UNO CNC Shield V3 A4988 Driver Expansion Board
Boards, Modules and Accessories, Boards and ProgrammersArduino UNO CNC Shield V3 A4988 Driver Expansion Board
– Designed for Arduino Uno R3 for easy plug-and-play setup
– Supports up to 4 stepper drivers (X, Y, Z, A)
– Compatible with GRBL firmware and external drivers (A4988, DRV8825)
– Micro-stepping jumpers for fine motion control
– End-stop inputs for all axes and labeled pinouts for simple wiring
– Compact 70mm x 55mm board ideal for DIY CNC, laser engravers, and roboticsSKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 DIP Board with Free USB Cable
- Arduino Uno R3 with ATmega328P in DIP package for easy chip replacement
- Includes free USB Type B cable for programming and power
- 14 digital I/O pins (6 PWM) and 6 analog inputs for flexible projects
- Compatible with the official Arduino IDE and common libraries
- Runs at 5V with recommended 7–12V input via barrel jack or USB power
- Perfect for students, makers, and DIY electronics learning
SKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 SMD Board with Free USB Cable
– Compact Arduino Uno R3 SMD board with ATmega328P SMD microcontroller
– Free USB Type B cable included for plug-and-play programming
– 14 digital I/O (6 PWM) and 6 analog inputs for sensors and actuators
– Stable 5V operation, supports 7–12V input via barrel jack or USB
– Full Arduino IDE support and compatibility with standard libraries
– Durable surface-mount design ideal for classrooms, kits, and projectsSKU: n/a
Arduino UNO CNC Shield V3 A4988 Driver Expansion Board
Only 1 left in stock
– Designed for Arduino Uno R3 for easy plug-and-play setup
– Supports up to 4 stepper drivers (X, Y, Z, A)
– Compatible with GRBL firmware and external drivers (A4988, DRV8825)
– Micro-stepping jumpers for fine motion control
– End-stop inputs for all axes and labeled pinouts for simple wiring
– Compact 70mm x 55mm board ideal for DIY CNC, laser engravers, and robotics
₨ 350 ₨ 450
Only 1 left in stock
Arduino Uno CNC Shield V3 – Overview
Take precise control of your CNC projects with the Arduino Uno CNC Shield V3. Built for makers, hobbyists, educators, and small-scale professionals, this CNC control board for Arduino simplifies stepper motor management and integrates seamlessly with GRBL firmware. It is ideal for CNC plotters, laser engravers, small mills, 3D printer experiments, and automation demos.
Key Benefits
- Simplified wiring and labeled pinouts to speed up build time
- Plug-and-play support for A4988 and DRV8825 stepper drivers (drivers not included)
- Micro-stepping control via jumpers for smoother, quieter motion
- Support for end-stop switches on every axis to protect your machine
- Compact form factor that mounts directly to an Arduino Uno R3
Compatibility and Firmware
This Arduino CNC Shield V3 is designed specifically to work with the Arduino Uno R3 and is fully compatible with GRBL firmware. GRBL provides a reliable G-code interpreter so your machine follows precise toolpaths without complex configuration. Use common control software that supports GRBL to drive your machine from PC, Mac, or Raspberry Pi.
Supported Drivers
- A4988 (popular for budget stepper control)
- DRV8825 (higher current options and microstepping)
Features and Hardware Details
- Supports up to 4 stepper motor drivers – X, Y, Z, and A (fourth axis)
- Jumpers for micro-stepping selection (full, half, quarter, eighth, sixteenth depending on driver)
- End-stop input connectors for all axes for homing and safety
- Onboard power and reset pins for easy power management
- Clean CNC shield V3 pinout for quick troubleshooting and upgrades
- Standard header pin design for mounting to Arduino Uno R3
Specifications
- Model: CNC Shield V3
- Compatible With: Arduino Uno R3
- Drivers Supported: A4988, DRV8825 (not included)
- Motor Control: Up to 4 stepper motors
- Microstep Settings: Configurable via jumpers
- Size: 70mm x 55mm (approx.)
- Mounting: Standard header pin design
Best Uses
The Arduino Uno CNC Shield V3 is perfect for:
- CNC plotters and laser engravers
- 3-axis and 4-axis desktop CNC machines
- Arduino CNC controller builds and upgrades
- 3D printer and robotics prototyping
- Educational labs and industrial automation kits
Why Buy from Colgroad
Colgroad offers reliable Arduino-compatible electronics in Pakistan with careful testing, secure packaging, and fast delivery. We support makers and builders with quality parts, clear product information, and responsive customer service to help you get your CNC project moving faster.
Getting Started – Quick Setup Guide
- Mount the CNC Shield V3 onto an Arduino Uno R3 using the header pins.
- Install your stepper driver modules (A4988 or DRV8825) into the shield sockets, ensuring orientation is correct.
- Set micro-step jumpers according to desired resolution and driver capability.
- Wire motor coils, end-stops, and power supply following the labeled pinouts on the shield.
- Upload GRBL firmware to the Arduino Uno and connect with a GRBL-compatible control application.
- Tune motor current and steps per millimeter in firmware or software for accurate motion.
Tips and Safety
- Always disconnect power before inserting or removing driver modules.
- Set driver current limits to match your stepper motors to avoid overheating.
- Double-check motor coil wiring to prevent skipped steps or damage.
- Use proper heat sinks on drivers when running higher currents.
Order Now
Level up your CNC build with the Arduino Uno CNC Shield V3. Order your CNC Shield from Colgroad today and get reliable control, clean wiring, and GRBL compatibility for smoother, more accurate motion.
Note: Images are for illustration purposes only.
1 review for Arduino UNO CNC Shield V3 A4988 Driver Expansion Board
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.80 rating from 570 reviews
- Boards, Modules and Accessories, Sensors And Modules
LJ12A3-4-Z/BX Inductive Proximity Sensor Module
– Model: LJ12A3-4-Z/BX inductive proximity sensor
– 4mm metal detection range (varies by target material)
– NPN Normally Open (NO) output, compatible with Arduino and PLCs
– DC 6-36V operation, output current ≤300mA, response ≤500Hz
– M12 threaded metal housing with built-in LED indicator and lock nuts
– Non-contact, wear-free detection ideal for CNC, 3D printers, robotics, and automationSKU: n/a - BMS Modules and Accessories
3S 12V 10A Li-Ion Cell BMS Charging Protection Module
- Professional 3S 12V BMS module for 3-series lithium-ion battery pack protection
- 10A continuous discharge current support for medium power applications
- Complete safety protection: overcharge, over-discharge, overcurrent, and short circuit
- Built-in cell balancing function maintains equal voltage across all cells
- Compact PCB design with easy connection interface for B+/B- and P+/P- terminals
- Perfect for 18650 battery packs, DIY power banks, LED systems, and robotics projects
SKU: n/a - Beginner STEM Kits
T-M302 Walkie-Talkie Intercom DIY Learning Kit
– Build a working two-way walkie-talkie intercom with included components
– Learn wireless communication, sound modulation, and radio frequency basics
– Ideal for STEM classrooms, electronics clubs, and science fairs
– Battery-powered and portable for safe classroom or home use
– Intermediate skill level; assembly time 60–90 minutes
– Includes circuit board, antenna, battery holder, wires, mounting frame, hardware, and manualSKU: n/a - Accessories
470μF 35V Electrolytic Polarized Capacitor
– 470 microfarad capacitance for strong energy storage and smoothing
– 35V rated voltage for medium-voltage DC circuits
– Polarized electrolytic design for efficient decoupling and filtering
– Radial lead package for easy PCB and breadboard mounting
– Compact size suited to space-constrained designs
– Ideal for power supplies, audio amps, regulators, and DIY projectsSKU: n/a - Soldering Tools
TE801 Helping Hand Magnifier Glass Auxiliary Clip With Soldering Stand
- Versatile desktop tool with magnifying glass, adjustable helping clips, LED illumination, and soldering iron stand
- Dual adjustable alligator clips securely hold PCBs, wires, and small components during soldering and repair work
- Built-in magnifying glass with 3.5X main lens (65mm) and 12X secondary lens (17mm) for detailed inspection
- 2 LED lights powered by 3 AAA batteries improve visibility in low-light work environments
- Stable weighted metal base with flexible gooseneck design for adjustable positioning
- Perfect for electronics repair, soldering, PCB assembly, jewelry work, model making, and precision crafting
SKU: n/a - Accessories
15μF 400V Electrolytic Polarized Capacitor
– High-voltage 15µF electrolytic capacitor rated for 400V DC
– Polarized aluminum electrolytic design for reliable energy storage
– Low leakage and stable performance for long-term use
– Radial lead package for easy through-hole PCB mounting
– Durable construction suitable for industrial and professional equipment
– Ideal for SMPS, inverters, motor drives, audio amplifiers, and power filteringSKU: n/a
Related products
- Boards, Modules and Accessories, Motors, Drivers and Wheels
Stepper Motor (NEMA 17) (40mm, 48mm) Brand New
Boards, Modules and Accessories, Motors, Drivers and WheelsStepper Motor (NEMA 17) (40mm, 48mm) Brand New
- High precision 1.8° step angle (200 steps/rev) for accurate motion control.
- High torque output for reliable holding and steady performance.
- Compact NEMA 17 form factor — available in 40mm and 48mm heights.
- Bipolar 4-wire configuration for easy integration with common drivers.
- Durable metal construction built for continuous use and longevity.
- Low vibration and noise for smooth operation in printers, CNCs and robots.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 4-Channel Arduino Relay Module Board
- Control up to 4 devices independently with four relay channels.
- Supports 250V AC/10A or 30V DC/10A per channel for high-power loads.
- Optocoupler isolation protects your microcontroller from high-voltage circuits.
- LED indicators provide clear visual status for each relay channel.
- Standard 5V TTL inputs — compatible with Arduino, Raspberry Pi and most MCUs.
- Screw terminals and mounting holes for secure wiring and easy installation.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
I2C Bi-Directional Logic Level Converter Module
- Bi-directional level shifting for safe two-way communication between different voltage domains.
- Optimized for I2C but also supports UART, SPI and One-Wire protocols.
- Wide voltage support: converts between 1.8V, 2.8V, 3.3V and 5V logic levels.
- Compact, 4-channel design — space-efficient and ideal for multi-signal projects.
- High-speed operation for reliable, fast data transfer.
- Plug-and-play — no configuration required; protects low-voltage devices from higher voltages.
SKU: n/a - Boards, Modules and Accessories, Wireless Communication
SIM800L GSM GPRS Wireless Transmission Module
Boards, Modules and Accessories, Wireless CommunicationSIM800L GSM GPRS Wireless Transmission Module
- SIM800L chipset delivering GSM and GPRS connectivity
- GPRS data up to 85.6 kbps for efficient transfer
- Supports voice calls and SMS messaging
- Compact, space-saving module ideal for embedded projects
- Low power consumption for battery-operated applications
- Flexible operating voltage: 3.4V to 4.4V with UART interface
SKU: n/a
Ahmad Ali (verified owner) –
Best Components in best price
Ahmad Ali –