-12%

10-60V 20A PWM High Power DC Motor Speed Controller Regulator Module

Availability:

In stock


  • PWM speed controller for brushed DC motors
  • Input voltage: 10-60V DC
  • Maximum current: up to 20A
  • Manual speed adjustment via knob
  • Compact module for robotics and DIY projects
  • Use with compatible DC power supply and motor
WhatsAppChat on WhatsApp

₨ 840 ₨ 950

In stock

The 10-60V 20A PWM High Power DC Motor Speed Controller Regulator Module is a high-power PWM controller designed for adjusting the speed of compatible brushed DC motors. It uses Pulse Width Modulation (PWM) to regulate the average power delivered to the motor, allowing smooth and convenient speed adjustment.

With a wide 10V to 60V DC input range and a high current rating of up to 20A, this controller is suitable for various DC motor applications, including robotics, electric mechanisms, machinery, fans, pumps, and other variable-speed DC motor projects.

Key Features

  • Wide 10-60V DC operating voltage range
  • High current capability up to 20A
  • PWM-based DC motor speed control
  • Adjustable motor speed
  • Suitable for brushed DC motors
  • Simple and convenient operation
  • High-power design for demanding applications
  • Suitable for robotics and automation projects
  • Compact controller module
  • Useful for DIY and industrial-style motor control applications

Technical Specifications

  • Product Type: DC Motor Speed Controller
  • Input Voltage: 10-60V DC
  • Maximum Rated Current: Up to 20A
  • Control Method: PWM (Pulse Width Modulation)
  • Motor Type: Compatible brushed DC motors
  • Output: Variable PWM-controlled DC motor power
  • Speed Adjustment: Manual
  • Input: DC power supply
  • Application: DC motor speed regulation
  • Cooling: Adequate cooling/airflow recommended for high-current operation

Working Principle

The module controls DC motor speed using Pulse Width Modulation (PWM). Instead of continuously reducing the supply voltage, the controller rapidly switches the motor’s power on and off.

The speed control setting changes the PWM duty cycle. A lower duty cycle delivers less average power to the motor, while a higher duty cycle delivers more average power. This allows the motor speed to be adjusted over a wide range while maintaining efficient electronic control.

Applications

  • DC motor speed control
  • Robotics projects
  • Electric machinery
  • Conveyor mechanisms
  • DIY motorized equipment
  • DC fan speed control
  • Pump speed control where compatible
  • Automation systems
  • Workshop equipment
  • Model and hobby projects
  • Electric actuator systems
  • Variable-speed DC motor applications

Advantages

  • Supports a wide DC voltage range
  • High-current design for larger DC motors
  • Simple PWM speed adjustment
  • Efficient method of controlling motor speed
  • Easy to integrate into DIY projects
  • Suitable for robotics and automation
  • Convenient manual speed regulation
  • Compact alternative to larger motor-control systems

Usage Tips

  • Use only a DC power supply within the 10-60V range.
  • Ensure the motor is compatible with the controller’s voltage and current capabilities.
  • Do not exceed the controller’s rated current.
  • The 20A rating should not automatically be treated as a guaranteed continuous operating current under all conditions; heat dissipation, wiring, motor load, and installation affect practical current handling.
  • Provide adequate ventilation or cooling when operating at higher currents.
  • Use appropriately rated wires, connectors, and power supplies for high-current applications.
  • Check polarity carefully before powering the module.
  • This type of controller is intended for compatible brushed DC motors and should not be used directly with AC or brushless motors unless specifically supported.

Note: Images are for Illustration Purposes Only.

What should I check before buying this DC motor speed controller?

Before you buy, confirm your motor is a brushed DC type, your power supply sits between 10V and 60V DC, and your motor’s current draw stays within the controller’s 20A rating. This module is designed for brushed DC motors only.

Here is a quick checklist:

  • Motor type: brushed DC (not AC or brushless).
  • Supply voltage: 10V to 60V DC.
  • Current: motor’s running current should be below 20A, with some margin for startup surge.
  • Cooling: plan for airflow if you run near the top of the current range.
  • Wiring: use wires and connectors rated for your current.

If you are building a robot, this controller pairs well with sensors such as the HC-SR04 Ultrasonic Distance Sensor Module for obstacle detection or the IR Infrared Obstacle Avoidance-Line Follower Sensor Module for line following. For switching power to other parts of your project, a 5V 1-Channel Arduino Relay Module Board can help.

This controller is in stock at Rs. 840 (price checked in October 2026).

How do I install and use this PWM controller?

Installation is straightforward: connect the DC power supply to the input terminals, connect the brushed DC motor to the output terminals, and turn the knob to adjust speed. Always check polarity before powering up.

Follow these steps:

  1. Mount the module on a non-conductive surface with good airflow.
  2. Connect the power supply positive and negative to the input side. Double-check polarity.
  3. Connect the motor to the output side.
  4. Turn the speed knob fully down before switching on.
  5. Power up and slowly turn the knob to increase speed.

For reliable operation, keep wires short and thick enough for your current. If the module gets hot, improve ventilation or reduce load. Do not exceed 20A. This controller works with brushed DC motors only. If you are new to electronics, start with a small motor and a low-voltage supply within the 10-60V range to test your setup.

Frequently Asked Questions

What is the price of the 10-60V 20A PWM DC motor speed controller?

The price is Rs. 840. This was checked in October 2026. The controller is in stock and can be delivered anywhere in Pakistan. For current pricing and availability, check the product page on our website.

Can I use this controller with a brushless motor?

No. This module is designed for brushed DC motors only. Brushless motors require a dedicated electronic speed controller (ESC). Using it with a brushless motor may damage the controller or the motor. Always match the controller type to your motor type.

What is the maximum current this controller can handle?

The maximum rated current is 20A. However, continuous operation near 20A depends on cooling, wiring, and motor load. Provide adequate airflow and use appropriately rated wires. Do not exceed 20A under any condition.

How do I connect this controller to my motor and power supply?

Connect the DC power supply (10-60V) to the input terminals and the brushed DC motor to the output terminals. Check polarity carefully before powering up. Use the knob to adjust speed. Ensure all connections are secure and rated for your current.

Does this controller come with a warranty?

Warranty information is available on request. Please contact us for details. We stand behind our products and can assist with any issues. Delivery is available nationwide across Pakistan with a flat-rate shipping charge of Rs. 350.

Category:
College Road Electronics

4.81

(608 Reviews)

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop