DIP IC
Showing 1–15 of 20 resultsSorted by popularity
-
Integrated Circuits (ICs)
7404 Hex Inverter NOT Gate IC (DIP)
- 7404 Hex Inverter NOT Gate IC with six independent logic inverters
- TTL 74xx family, standard-performance logic for reliable results
- Operates from 4.75 V to 5.25 V (typical 5 V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- High-speed switching for waveform shaping and timing circuits
- Ideal for prototyping, educational labs, and DIY electronics projects
SKU: n/a -
Integrated Circuits (ICs)
LM741 / UA741 Operational-Amplifier IC (DIP)
- General-purpose LM741 / UA741 operational amplifier in a standard DIP package
- Designed for signal amplification, conditioning, and analog processing
- Perfect for active filters, oscillators, and comparator circuits
- Breadboard-friendly DIP form factor for prototyping and education
- Wide supply range: ±5V to ±18V; supports single and dual supply operation
- Internally frequency-compensated and includes short-circuit protection
SKU: n/a -
Integrated Circuits (ICs)
74138 3-to-8 Line Decoder/Demultiplexer IC (DIP)
- TTL-based 3-to-8 line decoder and demultiplexer
- Accepts a 3-bit binary input and provides eight active-low outputs
- Three enable inputs (two active-low, one active-high) for flexible control and cascading
- Fast switching, low power consumption from TTL technology
- Standard 16-pin DIP package, breadboard and PCB friendly
- Ideal for memory addressing, I/O selection, and digital logic projects
SKU: n/a -
Integrated Circuits (ICs)
CD4017 Decade Counter IC (DIP)
– 5-stage Johnson decade counter with 10 decoded outputs (Q0–Q9)
– Ideal for LED chasers, light sequencers and timing circuits
– Wide supply voltage: 3V to 15V for TTL and CMOS compatibility
– Includes clock inhibit, reset and carry-out for cascading
– Standard DIP package for easy breadboard prototyping
– Low power consumption with high noise immunitySKU: n/a -
Integrated Circuits (ICs)
7402 Quad 2-Input NOR Gate IC (DIP)
- Quad 2-input NOR gate IC (4 independent gates per chip)
- TTL 74xx family device for reliable, high-speed logic operation
- Operates from 4.75V to 5.25V (typical 5V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- Universal logic gate — can implement AND, OR, NOT, NAND, XOR, XNOR
- Ideal for students, hobbyists, engineers, and lab prototyping
SKU: n/a -
Integrated Circuits (ICs)
LM358 Dual Low Power Operational-Amplifier IC (DIP)
- Dual operational amplifiers in a single DIP package
- Low power consumption for battery-powered projects
- Single-supply operation: 3V to 32V (or ±1.5V to ±16V)
- Internally frequency-compensated for stable performance
- Wide output voltage swing with high gain for signal amplification
- Breadboard-friendly DIP package for prototyping and PCB use
SKU: n/a -
Integrated Circuits (ICs)
7400 Quad 2-Input NAND Gate IC (DIP)
– Quad 2-input NAND gate IC: four independent 2-input NANDs per 14-pin chip
– TTL logic family (74xx) for reliable digital performance
– Wide operating voltage: 4.75V to 5.25V (typical 5V supply)
– Fast switching, ideal for prototyping and educational use
– Standard 14-pin DIP package, breadboard and PCB friendly
– Versatile universal gate: can implement AND, OR, NOT and other functions using NAND combinationsSKU: n/a -
Integrated Circuits (ICs)
ULN2003 Stepper Motor Driver IC (DIP)
– 7 Darlington transistor arrays in one DIP IC
– Each channel sinks up to 500 mA and withstands 50 V
– Built-in freewheeling diodes for inductive load protection
– Open-collector outputs compatible with TTL and CMOS
– Standard DIP package ideal for breadboards and prototyping
– Ideal for stepper motors, relays, solenoids, and LED driversSKU: n/a -
Integrated Circuits (ICs)
7485 4-Bit Magnitude Comparator IC (DIP)
– Compares two 4-bit binary numbers (A and B)
– Outputs A B logic signals
– TTL-compatible logic levels for reliable operation
– Cascadable design for comparisons of larger bit-widths
– DIP package ideal for breadboards and prototyping
– Suitable for sorting, ALU functions, and decision circuitsSKU: n/a -
Integrated Circuits (ICs)
CD4013 Dual D-Type Flip-Flop IC (DIP)
- Contains two independent, edge-triggered D-type flip-flops in one DIP package
- Each flip-flop has D, CLK, Set, Reset inputs and complementary Q and Q̅ outputs
- Wide supply voltage: 3V to 15V for flexible system integration
- Low power CMOS technology with high noise immunity for stable operation
- Ideal for frequency division, counters, data latching, and timing circuits
- Standard DIP package for easy breadboard prototyping and PCB mounting
SKU: n/a -
Integrated Circuits (ICs)
74157 Quad 2-Input Multiplexer MUX IC (DIP)
– Quad 2-Input Multiplexer: 4 independent 2-to-1 selection channels
– TTL-compatible inputs and outputs for standard digital logic
– Common select and enable pins simplify control for all channels
– Fast switching with low propagation delay for timing-sensitive designs
– DIP package for easy breadboard prototyping and PCB integration
– Ideal for data routing, microprocessor interfacing, arithmetic logic, and lab experimentsSKU: n/a -
Integrated Circuits (ICs)
LM393 Dual Comparator IC (DIP)
- Dual precision voltage comparators in a single DIP package
- Wide supply range: 2V to 36V (single supply) or ±1V to ±18V (dual supply)
- Open-collector outputs for easy logic interfacing
- Low power consumption, ideal for battery-powered projects
- Fast response and high accuracy for threshold detection
- Breadboard-friendly DIP package for prototyping and education
SKU: n/a -
Integrated Circuits (ICs)
CD4071 Quad 2-Input OR Gate IC (DIP)
– Contains 4 independent 2-input OR gates in a single 14-pin DIP package
– CMOS technology for low power consumption and high reliability
– Wide supply voltage range: 3 V to 15 V for flexible system design
– High noise immunity and TTL/CMOS logic compatibility
– Ideal for digital logic, control systems, timing circuits, and education
– Standard DIP footprint for easy prototyping and breadboard useSKU: n/a -
Integrated Circuits (ICs)
LM324 Quad Operational-Amplifier IC (DIP)
– LM324 quad operational amplifier in DIP package
– Four independent, frequency-compensated op-amps
– Operates from single supply (3V to 32V) or dual supply (±1.5V to ±16V)
– Low power consumption, suitable for battery-powered designs
– Ideal for signal conditioning, active filters, comparators and oscillators
– DIP format for easy prototyping and breadboard useSKU: n/a -
Integrated Circuits (ICs)
74126 Quad 3-State Bus Buffer IC (DIP)
- Quadruple 3-state buffer IC – four independent channels for bus control
- High-speed TTL performance for fast digital switching
- Tri-state outputs allow multiple devices to share data lines
- Operates on standard 5V logic supply for TTL compatibility
- Standard DIP packaging for easy prototyping and soldering
- Ideal for data bus interfacing, microprocessor and memory systems
SKU: n/a
