Sensors And Modules
Showing 76–90 of 158 resultsSorted by popularity
- Boards, Modules and Accessories, Sensors And Modules
Speed Measuring Sensor Module (LM393)
– High-precision optical speed detection using the LM393 comparator
– Adjustable sensitivity with onboard potentiometer for varying surfaces and light
– Clean digital pulse output for easy microcontroller interfacing
– Compact design with simple GPIO connections and mounting holes
– Ideal for robotics, motor control, RPM monitoring and feedback systems
– Operates from 5V and works in temperatures from -20°C to 70°CSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
YF-S201 Water Flow Sensor
– Pulse output signal for straightforward interfacing with microcontrollers (Arduino, Raspberry Pi, etc.).
– High accuracy for reliable water flow measurements.
– Wide flow range: 1–30 L/min, suitable for irrigation and monitoring.
– Compact, durable design for easy installation and long-term use.
– Low power consumption, ideal for battery-powered systems (5V operation).
– Compatible with clean, non-corrosive liquids such as water; great for DIY and industrial projects.SKU: n/a - Sensors And Modules
SW6206 QC 4 PD3.0 22.5W Fast Charging Power Bank Module
- 22.5W high-power fast charging output with PD3.0 and QC4+ support
- Compatible with Apple, Samsung, Huawei, Xiaomi smartphones and USB devices
- USB-C and USB-A output ports for universal device compatibility
- Integrated battery protection system with over-voltage and thermal protection
- High efficiency boost conversion up to 95% with low heat generation
- Perfect for DIY power banks and portable battery pack projects
SKU: n/a - Resistors, Capacitors, Inductors etc., Sensors And Modules
FSR402 Force Sensing Resistor Pressure Sensor
Resistors, Capacitors, Inductors etc., Sensors And ModulesFSR402 Force Sensing Resistor Pressure Sensor
– Detects pressure and force by decreasing resistance as force increases
– Thin, flexible sensor ideal for embedding in wearables and surfaces
– Analog output, easy to read with microcontrollers like Arduino or Raspberry Pi
– Suitable for light to moderate force detection, touchpads, and pressure-sensitive buttons
– Durable and reliable for repeated use in robotics, gaming, and interactive devices
– Simple to interface with voltage divider circuits for real-time measurementsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
MAX9814 Microphone Amplifier Module
- Low-noise microphone amplification for clearer audio signals
- Automatic Gain Control (AGC) for consistent output levels
- Adjustable gain to suit different microphones and environments
- Compact, durable module ideal for tight spaces in DIY projects
- Easy to interface with Arduino, Raspberry Pi and other controllers
- Great for voice recognition, audio recording, robotics and IoT sensors
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
K Type Thermocouple
- Wide temperature range: -200°C to 1372°C for extreme environments
- High accuracy for industrial and laboratory measurements
- Durable construction to withstand harsh conditions
- Flexible thermocouple wire and easy connector integration
- Compatible with controllers, data loggers, and monitoring systems
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
SW-420 Vibration Sensor Module
– High sensitivity piezoelectric or accelerometer-based detection for shocks and vibration
– Dual outputs: digital (DO) and analog (AO) for flexible interfacing
– Adjustable potentiometer to fine-tune sensitivity for different environments
– Compact, low-profile module for space-saving integration
– Compatible with Arduino, Raspberry Pi and most microcontrollers
– Ideal for security alarms, industrial monitoring, robotics and detection systemsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
AS608 Fingerprint Reader Optical Sensor Module
- Optical fingerprint capture for accurate biometric identification
- Compact, low-power design ideal for embedded systems and IoT devices
- Easy serial/UART integration with Arduino, Raspberry Pi, STM32 and other MCUs
- Fast enrollment and verification with onboard template management
- Durable touch surface rated for repeated daily use
- Developer-friendly with example code and rapid prototyping support
SKU: n/a - Sensors And Modules
BME280 Temperature, Humidity and Pressure Sensor Module
- High-precision environmental sensor measuring temperature, humidity, and atmospheric pressure
- Based on advanced Bosch BME280 sensor with factory calibration
- Supports both I2C and SPI communication interfaces
- Ultra-low power consumption with fast response time
- Compatible with Arduino, ESP32, ESP8266, Raspberry Pi, and STM32
- Ideal for weather stations, IoT devices, and environmental monitoring
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Float Switch Vertical Mount Water Level Sensor
– Simple and reliable float switch for liquid level detection
– Durable, corrosion-resistant plastic housing for fresh and saltwater
– Can be mounted vertically or horizontally for flexible installation
– Works with low-voltage DC and can control AC loads via relays
– Ideal for tank filling, sump pumps, aquariums, and industrial use
– Compatible with Arduino, Raspberry Pi, and relay modules for automationSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
BMP180 Barometric Pressure Sensor Module
• High precision atmospheric pressure measurement (±1 hPa)
• Integrated temperature sensor (-40°C to +85°C)
• Compact, space-saving 3.6 x 3.6 x 1.0 mm package
• Digital output via I2C or SPI for easy MCU integration
• Wide pressure range: 300 to 1100 hPa
• Low power consumption ideal for battery-powered projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
MLX90614 Contactless IR Temperature Sensor Module
Boards, Modules and Accessories, Sensors And ModulesMLX90614 Contactless IR Temperature Sensor Module
- Non-contact IR sensing for safe, hygienic temperature readings.
- High accuracy with ±0.5°C precision for reliable measurements.
- Wide measurement range: Object -40°C to +85°C; Ambient -70°C to +380°C.
- I2C digital interface for easy integration with Arduino, Raspberry Pi and microcontrollers.
- Low power operation from 3V to 5.5V — suitable for battery-powered projects.
- Compact, lightweight module fits into medical, home automation and industrial systems.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
GY-291 ADXL345 3-Axis Accelerometer Module
- High-precision ADXL345 3-axis motion sensing for tilt, vibration and impact detection
- Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g
- Digital I2C and SPI interfaces for Arduino, Raspberry Pi and microcontrollers
- Low-power operation with configurable power modes for battery projects
- Built-in FIFO, tap/double-tap, activity/inactivity, free-fall and orientation detection
- Compact, breadboard-friendly module ideal for wearables, drones, robotics and IoT
SKU: n/a - Sensors And Modules
INA219 Bi-Directional DC Current Sensor Power Supply Module
- High-precision DC current, voltage, and power monitoring based on Texas Instruments INA219 IC
- Bi-directional current measurement up to ±3.2A with built-in 0.1Ω precision shunt resistor
- I²C digital communication interface for easy integration with Arduino, ESP32, Raspberry Pi, and STM32
- Measures bus voltage from 0V to 26V DC with 12-bit ADC resolution and 0.8mA current resolution
- Ideal for battery monitoring, solar systems, power supply measurement, and IoT energy applications
- Low power consumption and compact design perfect for portable and embedded projects
- Wide operating voltage range of 3V to 5.5V DC with programmable calibration and gain
SKU: n/a














