Sensors And Modules
Showing 61–75 of 133 resultsSorted by popularity
- Boards, Modules and Accessories, Sensors And Modules
W5100 Ethernet Shield Board for Arduino
- Adds wired Ethernet connectivity to Arduino UNO for internet communication.
- Supports TCP/IP, UDP, HTTP and other standard internet protocols.
- Onboard RJ45 Ethernet port for stable, high-speed wired connections.
- Uses SPI interface for fast data transfer between Arduino and shield.
- Plug-and-play compatibility with the Arduino IDE and UNO form factor.
- Perfect for IoT, web servers, remote monitoring and home automation projects.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Arduino Nano Expansion Board Sensor Shield
- Designed for Arduino Nano compatibility for compact, high-performance projects
- Clear, labeled pins for fast plug-and-play sensor and actuator connections
- Multiple I/O pins and male headers to expand sensors, motors, and modules
- Compact and lightweight for portable IoT and robotics applications
- Perfect for prototyping smart home, environmental monitoring, and robotics
- Durable, budget-friendly solution for beginners and advanced makers
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Non-invasive AC Current Sensor Transformer 50A (SCT-013)
Boards, Modules and Accessories, Sensors And ModulesNon-invasive AC Current Sensor Transformer 50A (SCT-013)
– Non-invasive split-core design for easy installation around live conductors
– Accurate AC current sensing up to 50 A for reliable power monitoring
– Ideal for home energy monitoring, power meters, and IoT projects
– Lightweight, durable construction suitable for residential and commercial use
– Safe non-contact measurement reduces electrical hazard risk
– Helps track energy consumption and improve energy managementSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Automatic On Off Photocell Street Light Switch AC 220V 50-60Hz 10A
Boards, Modules and Accessories, Sensors And ModulesAutomatic On Off Photocell Street Light Switch AC 220V 50-60Hz 10A
- Automatic dusk-to-dawn control: turns lights on at dusk and off at dawn.
- AC 220V operation with 50-60Hz compatibility.
- 10A load capacity suitable for many street lighting fixtures.
- Weather-resistant design for reliable outdoor use.
- Energy-saving operation reduces electricity costs and maintenance.
- Easy to install and compatible with new installations or upgrades.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Thermoelectric Cooler Peltier Module TEC1-12710
- Compact TEC1-12710 Peltier module for efficient thermoelectric cooling.
- Operates at 12V DC for easy integration with standard power supplies.
- Delivers up to 60W heat dissipation with a maximum current of 6A.
- Silent, solid-state operation—no moving parts or refrigerants required.
- Durable construction for long-lasting performance in electronics and automotive use.
- Ideal for electronics cooling, robotics, portable coolers, lab equipment and DIY projects.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Ambient Light Intensity Sensor Module GY-302 BH1750
Boards, Modules and Accessories, Sensors And ModulesAmbient Light Intensity Sensor Module GY-302 BH1750
– High-precision ambient light measurements for accurate automation and monitoring
– I2C digital interface for easy integration with Arduino and Raspberry Pi
– Wide measurement range: 1 to 65,535 lux for dim to bright conditions
– Low power consumption ideal for battery-powered and IoT projects
– Compact, lightweight module that fits tight spaces and prototypes
– Ready for DIY, smart lighting, environmental monitoring; available from Colgroad in PakistanSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
MQ-135 Air Quality Control Gas Sensor Module
– Detects a wide range of gases including ammonia, benzene and smoke
– High sensitivity with fast response for real-time air quality monitoring
– Analog (0-5V) and configurable digital output for threshold alerts
– Onboard potentiometer for adjustable sensitivity and calibration
– Compact, low-power module with standard pin headers for easy MCU integration
– Ideal for air purifiers, HVAC, industrial safety and IoT air quality projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Laser Sensor Module (KY-008)
– Compact KY-008 laser emitter designed for Arduino and microcontroller projects
– Visible red laser at 650nm for precise beam targeting
– Operates on 5V DC with low current draw (under 40mA)
– Simple 3-pin hookup: VCC, GND, Signal for easy integration
– Small form factor (18.5mm x 15mm) ideal for compact designs
– Suitable for alarms, line-following robots, motion detection, and DIY projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Programmable Gain Amplifier Module 4-Channel 16-Bit (ADS1115)
Boards, Modules and Accessories, Sensors And ModulesProgrammable Gain Amplifier Module 4-Channel 16-Bit (ADS1115)
• 16-bit high-resolution ADC for ultra-precise measurements
• 4 analog input channels (single-ended) or 2 differential channels
• Built-in programmable gain amplifier (PGA) for amplifying weak signals
• I2C interface for easy connection to Arduino, Raspberry Pi, and ESP boards
• Low power consumption suitable for battery-powered projects
• Onboard comparator for real-time monitoring and alertsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Raspberry Pi Camera Module 5MP
- 5 megapixel sensor for clear photos and sharp 1080p video
- Direct CSI connector – plug-and-play with Raspberry Pi boards
- Fixed-focus lens in a compact, lightweight module
- Low power consumption – draws power directly from the Pi
- Ideal for surveillance, robotics, time-lapse, and face detection
- Compatible with all Raspberry Pi models and popular libraries
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Electret Microphone Amplifier Module (GY-MAX4466)
Boards, Modules and Accessories, Sensors And ModulesElectret Microphone Amplifier Module (GY-MAX4466)
– High-sensitivity electret microphone with low-noise MAX4466 amplifier
– Adjustable onboard potentiometer for precise gain control
– Analog output for easy reading with Arduino and microcontrollers
– Wide operating voltage: 2.4V to 5.5V for flexible power options
– Compact PCB with mounting holes for enclosures and wearables
– Ideal for voice activation, sound detection, and audio visualization projectsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
ISD1820 Voice Recording Module with Loudspeaker
- Ready-to-use ISD1820 voice recording module with built-in microphone and loudspeaker
- Plug and play operation for instant record and playback without external programming
- Up to 20 seconds of non-volatile voice memory for alerts and messages
- Works with Arduino, Raspberry Pi, ESP32 and other microcontrollers
- Manual buttons plus MCU control pins (REC, PLAYE, PLAYL) for flexible triggering
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
CH340 USB-TTL Serial Converter Module
– Compact CH340 USB to TTL serial adapter for Arduino, ESP8266, and embedded projects
– CH340G chipset for stable USB-to-serial communication
– Selectable 3.3V or 5V TTL logic levels via jumper
– Mini USB connector with TX/RX indicator LEDs for real-time activity
– Plug and play support for Windows, macOS, and Linux
– Breadboard-friendly dimensions and easy debugging for makers in IslamabadSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Arduino UNO Sensor Shield V5.0 Expansion Board
- Designed for Arduino UNO and UNO R3 compatibility.
- Breaks out all digital and analog pins to 3-pin (VCC, GND, Signal) connectors.
- Dedicated I2C, UART and SPI headers for easy module interfacing.
- Direct servo motor connections with clear, labeled headers.
- Stackable shield design for compact, layered builds.
- Reduces wiring errors and speeds up prototyping for robotics and sensor projects.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
CP2102 USB to TTL Module
- Converts USB signals to TTL-level serial signals for direct device interfacing
- Built around the reliable CP2102 USB 2.0 chipset for fast data transfer
- Supports a wide range of baud rates up to 1 Mbps for flexible communication
- Selectable 3.3V or 5V operating voltage and 5-pin header (TX, RX, 3.3V, 5V, GND)
- LED indicators for power and data activity to simplify troubleshooting
- Cross-platform driver support for Windows, Linux, and macOS
SKU: n/a
