Boards, Modules and Accessories
Showing 226–240 of 618 resultsSorted by popularity
- Boards, Modules and Accessories, Sensors And Modules
AD8232 ECG Monitoring Heart Sensor Module Kit
• Single-lead AD8232 ECG front-end for accurate heartbeat signal acquisition
• Low-power operation ideal for battery-powered and wearable projects
• Compact PCB with gold-plated pads and labeled connectors for easy setup
• Compatible with Arduino, Raspberry Pi, and most microcontrollers
• Reduces motion artifacts for clearer ECG data in mobile applications
• Great for students, DIY developers, biomedical projects, and IoT health solutionsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 8-Channel Arduino Relay Module Board
- Control up to 8 independent devices from one microcontroller or PLC
- Jumper-selectable isolation to separate relay power (JD-VCC) from logic power (VCC)
- LED status indicators for each channel for quick diagnostics
- TTL trigger inputs compatible with 3.3V and 5V controllers (Arduino, Raspberry Pi, ESP32)
- Secure screw terminals and header pins for load and signal connections
- Compact PCB with mounting holes; typical relay rating up to 10A per channel (verify datasheet)
SKU: n/a - Motors, Drivers and Wheels
A2212 2200KV BLDC Brushless DC Motor
– High-speed 2200KV outrunner motor for fast-response applications
– Brushless design for higher torque and improved efficiency
– Precision copper windings and strong permanent magnets for reliable output
– Lightweight and compact, ideal for drones, RC planes, and robotics
– Durable metal shaft and bearings for smooth rotation and long life
– Wide compatibility with standard ESCs and LiPo batteriesSKU: n/a - Boards, Modules and Accessories, Accessories
12v Piezo Active Big Buzzer (XHXDZ-3015)
- Operates at 12V DC for standard alarm and indicator circuits
- Active piezo design with built-in oscillator, no external driver required
- Compact round form factor, approximately 30mm diameter
- Lightweight and easy to mount on PCB or panel
- Loud, sharp sound output with low power consumption
- Durable construction for reliable continuous or intermittent use
SKU: n/a - Boards, Modules and Accessories
Dual PS2 Game Joystick Button Module Shield for Arduino Uno
– Dual-channel PS2-style joystick module with two analog axes for precise motion control
– Integrated push button for additional input and interaction
– Easy plug-and-play compatibility with Arduino Uno and other Arduino boards
– Smooth, responsive analog control ideal for robotics, drones, and custom game controllers
– Compact, breadboard-friendly design for prototyping and compact projects
– Affordable and reliable choice for hobbyists, students, and professional prototypes in PakistanSKU: n/a - Motors, Drivers and Wheels
DC Encoder Motor 333RPM 12V (JGB37-520) with 85mm Wheel (Complete Kit)
- Complete DC encoder motor kit with JGB37-520 333RPM 12V motor
- Built-in encoder (20 PPR) for precise position and speed feedback
- 85 mm rubber tire wheel with 6 mm D-shaft and set screw
- High torque: approx. 8 kg·cm stall torque; low current at no load
- Pre-assembled motor and wheel plus mounting hardware for quick installation
- Compact, durable design ideal for robots, RC cars, and education projects
SKU: n/a - Sensors And Modules
MAX30102 SPO2 Pulse Oximeter Heart Rate Sensor Module
- Accurate heart rate and SpO2 monitoring using red and IR LEDs
- Dual-LED design (660nm red and 940nm infrared) for precise readings
- I2C digital interface for easy integration with microcontrollers
- Low power consumption ideal for battery-powered wearables
- Compact, lightweight module suited for fitness trackers and medical devices
- Configurable sampling rates and LED currents to balance performance and power
SKU: n/a - Boards, Modules and Accessories, Wireless Communication
IR Infrared Remote Control and Receiver Module (TX/RX)
Boards, Modules and Accessories, Wireless CommunicationIR Infrared Remote Control and Receiver Module (TX/RX)
- Compact IR transmitter and receiver kit ideal for Arduino and DIY projects
- 21-key IR remote included with battery for immediate use
- High-sensitivity HX1838-compatible receiver, digital output
- 38 kHz IR frequency with a reliable 8-10 meter range
- Operates at 3.3V-5V and works with Arduino, ESP32, Raspberry Pi
- Plug and play design for rapid prototyping and home automation
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
L293D 4-Channel Motor Driver Module
– Dual H-bridge driver for two DC motors or one bipolar stepper motor
– Logic-level inputs compatible with Arduino and Raspberry Pi
– Built-in flyback diodes and thermal protection for reliable operation
– Supports motor voltages up to 36V; ~600 mA continuous per channel, 1.2 A peak
– Simple PWM speed control and direction reversal
– Compact breakout with screw terminals and header pins for easy wiringSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
ACS712 Hall Effect Current Sensor Module 20A
- Measures AC and DC currents up to ±20A
- Output sensitivity: 100 mV/A for easy ADC conversion
- Safe galvanic isolation using Hall effect sensing
- Compatible with Arduino, ESP32, STM32 and Raspberry Pi
- Low-noise analog output and compact PCB design
- Operating voltage: 5V DC
- Ideal for robotics, power monitoring and automation
SKU: n/a - Boards, Modules and Accessories, Accessories
12×12 Inch Single Sided Bakelite PCB Board
– Single-sided PCB with a copper layer for easy through-hole soldering.
– Made from high-quality Bakelite (phenolic resin) for excellent insulation.
– Large 1ft x 1ft (305 x 305 mm) size for complex circuits and multi-layout prototyping.
– Heat and chemical resistant; suitable for soldering and light industrial use.
– Durable, easy to cut/drill, and customizable for DIY, education, and production.
– Ideal for through-hole components and low-volume circuit manufacturing.SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
A4988 Stepper Motor Driver with Heatsink
– Compact A4988 stepper motor driver for bipolar stepper motors
– Supports 1, 1/2, 1/4, 1/8 and 1/16 microstepping
– Adjustable current limiting to protect motors
– Compatible with Arduino, CNC shields and common controllers
– Built-in translator for easy step/direction control
– Thermal shutdown and crossover current protectionSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
5V 4-Channel Arduino Relay Module Board
- Control up to 4 devices independently with four relay channels.
- Supports 250V AC/10A or 30V DC/10A per channel for high-power loads.
- Optocoupler isolation protects your microcontroller from high-voltage circuits.
- LED indicators provide clear visual status for each relay channel.
- Standard 5V TTL inputs — compatible with Arduino, Raspberry Pi and most MCUs.
- Screw terminals and mounting holes for secure wiring and easy installation.
SKU: n/a - Motors, Drivers and Wheels
N20 Mini DC Encoder Motor 6V (310/530 RPM) (Brand New)
- Compact N20 mini DC gear motor with built-in magnetic encoder for precise speed and position feedback
- Available in 310 RPM and 530 RPM variants at 6V DC operating voltage
- Metal gearbox construction delivers high torque output and improved durability
- Hall-effect encoder provides 14 counts per motor revolution for accurate motion control
- Perfect for line-following robots, balancing robots, smart vehicles, robotic arms, and automation systems
- D-type shaft (3mm diameter) with compact dimensions: 12mm diameter, 30-31mm length
SKU: n/a - Buck, Boost Converters and Regulators
XL6009E1 DC-DC Auto Step Up/Down Buck/Boost Converter Module 1.3-35V 3A
Buck, Boost Converters and RegulatorsXL6009E1 DC-DC Auto Step Up/Down Buck/Boost Converter Module 1.3-35V 3A
- Auto buck-boost DC-DC converter module with XL6009E1 chip for automatic voltage step-up and step-down
- Wide input voltage range: 5V to 32V DC with adjustable output from 1.3V to 35V DC
- High output current capacity up to 3A (2A recommended for continuous operation)
- Excellent conversion efficiency up to 94% with 400kHz switching frequency
- Precision multi-turn potentiometer for accurate output voltage adjustment
- Compact design (48 x 25 x 15 mm) ideal for battery-powered, solar, and embedded electronics projects
SKU: n/a
