- Batteries, Cells and Power Supply, Boards, Modules and Accessories
Dual USB Fast Charging Power Bank Module for 18650 Cells Battery
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesDual USB Fast Charging Power Bank Module for 18650 Cells Battery
- Build your own portable power bank using 18650 lithium-ion cells.
- Integrated LCD display for real-time battery charge and voltage readouts.
- Includes rechargeable 18650 module for immediate use.
- Built-in battery management system (BMS) for overcharge, over-discharge and short-circuit protection.
- USB output lets you charge smartphones, tablets and other USB devices.
- Compact, lightweight design ideal for DIY projects and outdoor use.
- Order now for fast delivery in Islamabad.
SKU: n/a - Batteries, Cells and Power Supply
Li-Ion 3.7V 18650 Rechargeable Battery Cell (2000mAh)
- Compact 18650 cylindrical cell (18×65 mm) with high energy density for extended runtime.
- Reliable 2000mAh nominal capacity and stable 3.7V output for consistent device performance.
- Long cycle life rated for hundreds of charge/discharge cycles for durable use.
- Built-in safety protections including overcharge, over-discharge, short-circuit and overheat safeguards.
- Low self-discharge for better storage retention and less maintenance charging.
- Lightweight and versatile – suitable for consumer electronics, power tools, EV packs and renewable storage.
SKU: n/a - Batteries, Cells and Power Supply, Boards, Modules and Accessories
LiPo Battery Charging Module 2A (TP5100)
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesLiPo Battery Charging Module 2A (TP5100)
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devicesSKU: n/a
Dual USB Fast Charging Power Bank Module for 18650 Cells Battery
In stock
- Build your own portable power bank using 18650 lithium-ion cells.
- Integrated LCD display for real-time battery charge and voltage readouts.
- Includes rechargeable 18650 module for immediate use.
- Built-in battery management system (BMS) for overcharge, over-discharge and short-circuit protection.
- USB output lets you charge smartphones, tablets and other USB devices.
- Compact, lightweight design ideal for DIY projects and outdoor use.
- Order now for fast delivery in Islamabad.
₨ 380 ₨ 450
In stock
Overview: 18650 Display Power Bank Module
The 18650 Display Power Bank Module is a compact, DIY-friendly kit designed to help makers and hobbyists build a custom rechargeable power bank. The module combines an LCD display for live battery monitoring with an integrated battery management system to protect 18650 lithium-ion cells and provide reliable portable power.
Key Features
- Real-time battery monitoring: Built-in LCD display shows battery charge level and voltage at a glance.
- Integrated battery management system: Protects cells from overcharge, over-discharge and short circuits to improve safety and longevity.
- USB output for charging: Provides convenient power for smartphones, tablets and other USB-powered devices.
- Works with 18650 lithium-ion cells: Supports high-capacity 18650 batteries for long-lasting portable charging.
- Compact and portable: Lightweight design makes it ideal for camping, travel and backup power.
- DIY assembly: Easy to integrate into custom enclosures and projects so you control capacity and features.
Applications
- DIY power bank: Build a rechargeable power bank tailored to your capacity and size requirements.
- Portable charging: Keep phones, tablets and small electronics powered while on the move.
- Battery backup systems: Use in small-scale home energy or solar storage projects.
- Electronics projects: Ideal for makers building custom power supplies for prototypes and gadgets.
Benefits for Your Projects
- Custom capacity: Choose the number and grade of 18650 cells to match your runtime needs.
- Clear status feedback: The LCD display removes guesswork so you know when to recharge.
- Safer operation: On-board BMS reduces risk of damage and extends battery life.
- Versatile integration: Mount in enclosures or cases for a finished portable power solution.
How to Use the 18650 Display Power Bank Module
- Select quality, protected 18650 lithium-ion cells rated for your desired capacity and current.
- Install cells into the module following correct polarity and secure connections.
- Verify the LCD displays battery voltage and charge level before first use.
- Connect your device to the USB output to charge. Monitor the display while charging and discharging.
- Follow charging guidelines and allow the BMS to manage safe operation.
Safety and Best Practices
- Only use high-quality, matched 18650 cells and avoid damaged batteries.
- Do not short circuit the battery terminals or expose the module to water or excessive heat.
- Ensure correct polarity when installing cells to prevent damage.
- Charge and discharge within the recommended ratings for your chosen cells and the module.
- If you are unsure about wiring or battery selection, consult an experienced builder or technician.
What is Included
- 18650 Display Power Bank Module with LCD display and on-board BMS
- Rechargeable 18650 module (as listed)
- Basic wiring and terminal connections ready for integration
Ordering, Warranty and Delivery
Buy the 18650 Display Power Bank Module from Colgroad for a quick and reliable shopping experience. We offer fast delivery in Islamabad and support for after-sales questions. Images are for illustration purposes only.
Ready to Build Your Custom Power Bank?
Order the 18650 Display Power Bank Module today and start creating a personalized rechargeable power bank for camping, travel, or electronics projects. If you need help selecting compatible 18650 cells or planning your build, contact our support team for guidance.
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.81 rating from 608 reviews
- Incubator and Poultry Industry
Ceramic Heat Emitter 25W, 100 Watts
– Provides safe, non-light infrared heat for pets
– Maintains natural day-night cycles with 24/7 warmth
– Available in 25W for small habitats and 100W for larger enclosures
– Durable, heat-resistant ceramic construction for long service life
– Easy to install in any standard overhead fixture
– Ideal for reptiles, amphibians, birds, and small animalsSKU: n/a - Sensors And Modules, Wireless Communication
Mini Solar Panel Plate 2V 225mA 0.45W (64x46mm)
- Compact mini solar panel with 2V output voltage and 225mA maximum current
- Maximum power output of 0.45W for low-power electronic projects
- Small dimensions of 64 x 46mm, perfect for portable and DIY applications
- Converts sunlight into clean, renewable electrical energy using photovoltaic technology
- Ideal for educational projects, Arduino experiments, robotics, and battery charging
- Can be connected in series or parallel to increase voltage or current output
- Lightweight, durable, and environmentally friendly solar energy solution
SKU: n/a - Boards, Modules and Accessories, RC Drones and Accessories
IMAX B6AC LiPo Battery Balance Charger 80W
Boards, Modules and Accessories, RC Drones and AccessoriesIMAX B6AC LiPo Battery Balance Charger 80W
– Professional IMAX B6AC smart battery charger
– 80W high-power balance charging for fast, efficient charging
– Supports LiPo, Li-ion, LiFe, NiMH, NiCd and Pb batteries
– Dual AC (110–240V) and DC (11–18V) input for home or field use
– Built-in microprocessor with safety protections and temperature monitoring
– LCD display with real-time monitoring; compact and portable for RC, drones, and roboticsSKU: n/a - Boards, Modules and Accessories, Sensors And Modules
HC-SR501 PIR Motion Sensor Module
- Passive Infrared (PIR) sensor for motion detection.
- Adjustable sensitivity and delay time via onboard potentiometers.
- Detection range up to 7 meters with a 120 degree cone angle.
- Digital output for easy integration with microcontrollers.
- Low power consumption suitable for battery-powered projects.
- Compact, lightweight design for space-constrained applications.
SKU: n/a - Boards, Modules and Accessories
Mecanum Wheels Pair (97mm)
– Omnidirectional movement for forward, backward, and lateral motion
– CNC-machined stainless steel hub with polyurethane rollers
– Silent operation with sealed bearings to resist dust and moisture
– High load capacity – supports up to 25 kg per wheel
– Quick, tool-friendly installation with included screws and adapters
– Ideal for DIY robots, competition bots, and prototype platformsSKU: n/a
















Reviews
There are no reviews yet