- Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 DIP Board with Free USB Cable
- Arduino Uno R3 with ATmega328P in DIP package for easy chip replacement
- Includes free USB Type B cable for programming and power
- 14 digital I/O pins (6 PWM) and 6 analog inputs for flexible projects
- Compatible with the official Arduino IDE and common libraries
- Runs at 5V with recommended 7–12V input via barrel jack or USB power
- Perfect for students, makers, and DIY electronics learning
SKU: n/a
Arduino Uno R3 DIP Board with Free USB Cable
In stock
- Arduino Uno R3 with ATmega328P in DIP package for easy chip replacement
- Includes free USB Type B cable for programming and power
- 14 digital I/O pins (6 PWM) and 6 analog inputs for flexible projects
- Compatible with the official Arduino IDE and common libraries
- Runs at 5V with recommended 7–12V input via barrel jack or USB power
- Perfect for students, makers, and DIY electronics learning
₨ 1,250 ₨ 1,400
In stock
Arduino Uno R3 DIP Board Overview
The Arduino Uno R3 DIP board with free USB cable is an entry-level Arduino development board built around the ATmega328P in a Dual In-Line Package. This DIP version makes the microcontroller easy to replace and ideal for learning, repair, and prototyping. It is fully compatible with the Arduino IDE and most Arduino Uno R3 shields and tutorials.
Key Features
- ATmega328P Microcontroller (DIP type) – removable and beginner-friendly
- USB Type B interface included – free USB cable for immediate programming and power
- 14 Digital I/O pins (6 PWM) plus 6 analog inputs for sensors and actuators
- 16 MHz clock speed and 32 KB flash memory for sketches and libraries
- Stable 5V operating voltage with recommended 7–12V input via the barrel jack
- Compatible with the Arduino IDE, official libraries, and community examples
Technical Specifications
- Microcontroller: ATmega328P (DIP version)
- Operating Voltage: 5V
- Input Voltage (recommended): 7-12V
- Digital I/O Pins: 14 (6 with PWM)
- Analog Inputs: 6
- Clock Speed: 16 MHz
- USB Type: B (included)
- Flash Memory: 32 KB
- Dimensions: 68.6 mm x 53.4 mm
Why Choose the DIP Version
The DIP ATmega328P lets you remove and replace the microcontroller without soldering. This is a big advantage for learning, classroom use, or when developing projects that may require a replacement MCU. You can experiment freely and swap chips if you need to restore a board quickly.
What You Can Build
- Basic tutorials like Blink, Button, and Analog Read
- Sensor projects: temperature, humidity, light, and gas detectors
- Robotics: motor control, servo projects, and simple autonomous robots
- Home automation: relays, switches, and timed control systems
- IoT prototypes when paired with Wi-Fi or GSM modules
Getting Started – Simple Steps
- Connect the included USB Type B cable from the board to your computer.
- Install the Arduino IDE from the official Arduino website.
- Select the Arduino Uno board and the correct COM port in the IDE.
- Open the Blink example, compile, and upload to test the board.
- Explore sensors, shields, and libraries to expand your project.
What is Included
- 1 x Arduino Uno R3 DIP board (ATmega328P installed)
- 1 x USB Type B cable (included free)
- Quality-checked and packed by Colgroad
Quality and Support from Colgroad
Colgroad works with trusted Arduino Uno R3 suppliers and tests each board for quality before shipping. We provide responsive customer support, careful packing, and fast delivery across Pakistan. Whether you are buying for school, a lab, or home projects, Colgroad aims to make your Arduino journey easy and reliable.
Start Creating Today
Bring your ideas to life with the Arduino Uno R3 DIP board with free USB cable. Buy now at Colgroad.com for fast delivery and great value. Note: Images are for illustration purposes only.
3 reviews for Arduino Uno R3 DIP Board with Free USB Cable
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.81 rating from 608 reviews
- Beginner STEM Kits
T-M420 Taxiing Aircraft DIY Learning Kit
- Hands-on DIY kit to build a motorized taxiing model aircraft
- STEM-focused lessons in aerodynamics, propulsion, motion, and energy conversion
- Complete hardware set: motor, propeller, wheels, wiring, switch, and tools
- Beginner-friendly assembly with step-by-step instructions; ages 10 and up
- Durable plastic and lightweight metal parts for repeated classroom use
- Great for science fairs, after-school clubs, and classroom demonstrations
SKU: n/a - Jumper Wires and JST Connectors etc.
JST Male Connector 2.54mm (2-Pin) (Straight / Right Angle)
– JST Male Connector with 2.54mm pitch for standard PCB and wiring compatibility
– 2-pin configuration ideal for power and signal lines
– Available in straight (vertical) and right-angle (horizontal) mounting
– Durable plastic housing with corrosion-resistant metal contacts
– Compact, lightweight design perfect for Arduino, robotics, RC and prototyping
– Easy to solder or use with crimped wiring harnesses for reliable connectionsSKU: n/a - Boards, Modules and Accessories
TCRT5000 IR Sensor Line Tracking Module
- Compact TCRT5000 IR module for precise line tracking and proximity sensing.
- Works with Arduino, Raspberry Pi, and most microcontrollers.
- Infrared reflective detection for reliable black/white line discrimination.
- Low power consumption and durable optical components for long-term use.
- Easy-to-read digital output for quick integration and debugging.
- Great for DIY robotics, line follower robots, edge detection, and obstacle avoidance.
SKU: n/a - Beginner STEM Kits
T-M208 Lunar Rover DIY Learning Kit
– Hands-on DIY kit to build a miniature lunar rover
– Motorized 4WD drive powered by DC motors
– Ideal for STEM classes, workshops, and science fairs
– Easy assembly with pre-cut parts and clear instructions
– Battery-operated safe low-voltage design (3V-6V)
– Durable materials for repeated classroom use and demonstrationsSKU: n/a - Jumper Wires and JST Connectors etc.
15cm JST Female Connector Cable 2.0mm Pitch (3-Pin)
- 15cm JST PH Female Connector Cable with 3-pin configuration and 2.0mm pitch
- Pre-wired harness cable for plug-and-play signal and low-power DC connections
- Compatible with Arduino, ESP32, sensors, robotics, drones, and IoT applications
- Features secure locking system to prevent accidental disconnection during operation
- Flexible stranded copper wires with PVC insulation for easy routing in tight spaces
- Supports up to 2A per line, ideal for power + signal + ground configurations
- No soldering required on connector side for quick prototyping and development
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
28BYJ-48 Stepper Motor 5V DC
- High precision: 64 motor steps (5.625° per step) with a 1:64 gearbox for fine positioning
- Unipolar design for easy control with Arduino, Raspberry Pi and other microcontrollers
- Runs on a safe 5V DC supply ideal for battery-powered and portable projects
- Built-in gearbox increases torque and effective resolution (common effective output: 4096 steps)
- Compact, lightweight housing fits tight spaces in robotics and automation
- Compatible with ULN2003 and equivalent driver boards for plug-and-play integration
SKU: n/a















Afaq (verified owner) –
Afaq –
Anonymous (verified owner) –
Anonymous –
steve cloutier (verified owner) –
steve cloutier –