-21%

6514 TT Motor Free Wheel Cross Axis Robot Wheel Suitable for N20 and TT Motors

Availability:

In stock


  • 6514-style free wheel for small robot chassis
  • Passive support wheel, no motor or wiring needed
  • Fits N20 and TT motor based robot cars
  • Adds a third contact point for 2WD stability
  • Free rotation reduces friction while moving
  • Useful for Arduino, STEM and DIY robot projects
WhatsAppChat on WhatsApp

₨ 550 ₨ 700

In stock

Factory tested, sent sealed Film your unboxing so we can quickly replace anything damaged, missing or wrong. Returns, refunds and warranty

The 6514 TT Motor Free Wheel Cross Axis Robot Wheel is a compact support wheel designed for small DIY robots, robotic cars, and mobile platforms. It is suitable for use with N20 and TT motor-based robot chassis, helping provide additional support and smooth movement for the robot.

The free wheel design allows the wheel to rotate as the robot moves, reducing friction and helping the chassis maintain stability. It is particularly useful for 2WD robot cars where the powered wheels require an additional support point.

Key Features

  • 6514-style free wheel for robot chassis
  • Suitable for N20 and TT motor robot projects
  • Compact and lightweight design
  • Helps support 2WD robotic platforms
  • Free-rotating wheel design
  • Reduces friction during movement
  • Helps improve robot chassis stability
  • Suitable for DIY robotic cars
  • Easy to mount on compatible chassis
  • Useful for Arduino and robotics projects

Technical Specifications

  • Product Type: Robot Free Wheel / Support Wheel
  • Model: 6514
  • Wheel Type: Free / Passive Wheel
  • Motor Compatibility: N20 and TT motor-based robot chassis
  • Drive Type: Non-powered / Passive
  • Application: 2WD robot cars and small mobile platforms
  • Material: Plastic and metal components, depending on construction
  • Mounting: Suitable for compatible robot chassis

Working Principle

The 6514 free wheel acts as a passive support wheel rather than a powered drive wheel. The N20 or TT motors drive the main wheels of the robot, while this free wheel supports the chassis and rotates freely as the robot moves.

By providing an additional contact point with the floor, the wheel helps maintain the balance and stability of the robot chassis while allowing it to move forward, backward, and turn smoothly.

Applications

  • 2WD robotic cars
  • Arduino robot projects
  • N20 motor robot chassis
  • TT motor robot chassis
  • Obstacle-avoiding robots
  • Line-following robots
  • Bluetooth-controlled robots
  • Remote-controlled robot cars
  • DIY mobile robots
  • STEM and educational robotics projects
  • Small autonomous vehicles
  • Custom robot chassis

Advantages

  • Provides additional chassis support
  • Helps improve robot stability
  • Free rotation allows smooth movement
  • Suitable for compact robot designs
  • Compatible with popular N20 and TT motor platforms
  • Easy to integrate into DIY robot chassis
  • Lightweight and practical for small robots
  • Useful for student and hobby robotics projects

Usage Tips

  • Mount the free wheel securely to the robot chassis.
  • Ensure the wheel can rotate freely after installation.
  • Keep the wheel aligned properly with the robot chassis.
  • Make sure the support wheel does not place excessive load on the drive motors.
  • Check that the wheel contacts the floor correctly when the robot is placed on a flat surface.
  • Use suitable screws and mounting hardware for the selected chassis.

Note: Images are for Illustration Purposes Only.

Which motor does the 6514 free wheel work with?

The 6514 free wheel is made for N20 and TT motor based robot chassis. It is a passive support wheel, so it does not connect to a motor or driver. The N20 or TT motors turn the main wheels, and this wheel rolls along as a third contact point.

That makes it a good match for:

  • 2WD robot cars built on a TT motor chassis
  • Small N20 motor platforms that need a front or rear support point
  • Arduino robot cars where the drive wheels sit at one end of the frame

If you are still choosing the drive side of the build, the Motors, Drivers and Wheels category covers motors, wheels and drivers in one place. A common pairing is a TT or N20 gear motor set with an L298N Motor Driver Module Dual H-Bridge 3A to control speed and direction. The free wheel itself needs no wiring at all.

How do I fit the 6514 free wheel on my robot chassis?

Mount the wheel to the chassis with suitable screws so it sits level with the drive wheels and touches the floor. Then check by hand that it spins freely before you power the motors.

  1. Place the wheel at the end of the chassis opposite the drive wheels, or wherever the frame needs support.
  2. Fix it with screws and mounting hardware that match your chassis holes.
  3. Set the height so the drive wheels and the free wheel all rest on a flat surface.
  4. Spin the wheel with your finger. It should turn without rubbing the frame.
  5. Run the robot slowly and watch for wobble or drag. Adjust the mounting if you see either.

Keep the load light. The free wheel is there to steady the chassis, not to carry the weight of a heavy build. For steering or pan mechanisms on the same robot, small servos such as the SG90 9g Micro Servo Motor (180 Degree Rotation) or the metal gear MG90S Metal Gear Servo Motor (180 Degree Rotation) are often used alongside a support wheel.

Frequently Asked Questions

What is the 6514 TT motor free wheel used for?

It is a passive support wheel for small robot chassis. It adds a third contact point under a 2WD robot car so the frame stays level and turns smoothly. The drive wheels do the moving, and this wheel rolls freely along the floor to reduce friction and wobble.

Is the 6514 free wheel powered by a motor?

No. It is a free or passive wheel with no motor and no wiring. The N20 or TT motors drive the main wheels, and this wheel only supports the chassis and rotates as the robot moves. You mount it and check that it spins freely.

How much does the 6514 TT motor free wheel cost in Pakistan?

The 6514 TT Motor Free Wheel Cross Axis Robot Wheel is listed at Rs. 550, checked in October 2026. College Road Electronics is on College Road, Rawalpindi, and ships nationwide across Pakistan at a flat rate of Rs 350.

Can I use this free wheel with an Arduino robot car?

Yes. It suits Arduino robot cars built on N20 or TT motor chassis, including line-following, obstacle-avoiding and Bluetooth-controlled builds. Mount it level with the drive wheels, keep the load light, and it will steady the frame without adding any electronics to your circuit.

Does the free wheel fit any robot chassis?

It fits chassis made for N20 and TT motor setups, which are the common small robot car frames. Check your chassis mounting holes and clearance before ordering. If the holes do not line up, you can drill new ones or use a small adapter plate.

Reviews

There are no reviews yet

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop