-25%

3S 11.1V 10A Li-Ion Cell BMS Charging Protection Module

(2 customer reviews)
Availability:

In stock


  • Supports 3S (11.1V) Li-Ion / Li-Po battery packs
  • 10A continuous discharge current (approx. 15A peak overcurrent cutoff)
  • Overcharge cutoff at ~4.25V per cell to prevent overvoltage
  • Over-discharge cutoff at ~2.7V per cell to avoid deep discharge
  • Built-in overcurrent and short-circuit protection with automatic recovery
  • Integrated cell balancing for longer pack life; compact PCB for easy integration
WhatsAppChat on WhatsApp

₨ 150 ₨ 200

In stock

Factory tested, sent sealed Film your unboxing so we can quickly replace anything damaged, missing or wrong. Returns, refunds and warranty

Product Overview

The 3S 11.1V 10A Li-Ion Cell BMS Charging Protection Module is a compact, high-performance battery management system designed for 3-cell (3S) 11.1V Lithium-Ion and Lithium-Polymer battery packs. With a continuous discharge rating of 10A and robust protective functions, this 3S 11.1V BMS is ideal for robotics, drones, LED lighting, portable electronics, and DIY battery projects.

Key Features

  • Designed for 3S (11.1V) Li-Ion / Li-Po battery packs
  • Continuous discharge current: 10A
  • Peak overcurrent cutoff: ~15A
  • Overcharge cutoff: ~4.25 ±0.05V per cell
  • Over-discharge cutoff: ~2.7 ±0.1V per cell
  • Built-in overcurrent and short-circuit protection
  • Integrated cell balancing for equal charge and longer pack life
  • Compact PCB form factor for easy integration into custom packs and projects

Protections and How It Works

  • Overcharge protection: The BMS disconnects charging when any cell reaches approximately 4.25V to prevent overvoltage stress.
  • Over-discharge protection: The load is disconnected when any cell drops near 2.7V to prevent permanent cell damage.
  • Overcurrent protection: The module cuts power if current exceeds the safety threshold (approx. 15A peak), protecting wiring and cells.
  • Short-circuit protection: Rapid response protection prevents excessive current flow in fault conditions.
  • Cell balancing: Passive balancing keeps all three cells within a narrow voltage window for maximum usable capacity and longer cycle life.
  • Automatic recovery: The BMS will restore output once voltage and current return to safe ranges, simplifying reuse after a trip event.

Technical Specifications

  • Supported configuration: 3S (3-cell) 11.1V Li-Ion / Li-Po
  • Continuous discharge: 10A
  • Peak overcurrent cutoff: ~15A
  • Overcharge cutoff voltage: ~4.25 ±0.05V per cell
  • Over-discharge cutoff voltage: ~2.7 ±0.1V per cell
  • Operating temperature: -20°C to +60°C
  • Charger compatibility: CC/CV Li-Ion chargers
  • PCB: Compact design for easy integration into battery packs and devices

Applications

  • DIY 11.1V battery pack builds
  • Robotics and automation systems
  • LED lighting and strip installations
  • Portable electronic devices and tools
  • Small RC models and drones
  • IoT power modules and remote sensors

Installation and Usage Tips

  • Use a compatible CC/CV charger set for 3S Li-Ion/Li-Po chemistry.
  • Verify correct cell order and balance leads before connecting to avoid damage.
  • Ensure wiring and connectors are rated above the 10A continuous current for safety margins.
  • Keep the module within the specified operating temperature range for reliable protection.
  • Periodically check cell voltages to confirm balancing is working as expected.

Why Choose This 3S 11.1V 10A Li-Ion BMS

This BMS combines proven safety features with integrated cell balancing and a compact footprint, making it an excellent choice for hobbyists and small-scale professional projects that need reliable 11.1V battery protection without adding bulk.

Note: Images are for illustration purposes only.

2 reviews for 3S 11.1V 10A Li-Ion Cell BMS Charging Protection Module

  1. Abdul Jabbar (verified owner) –

    👍

    Abdul Jabbar –

  2. Abdul Shakoor (verified owner) –

    Abdul Shakoor –

Only logged in customers who have purchased this product may leave a review.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 4.81 rating from 608 reviews
0
0
Your Cart
Your cart is emptyReturn to Shop