Student Corner
-
Sensor And Modules, Students Corner
Lithium Lipo 18650 Cell Battery Charger Board BMS Protection Module HX-2S-01
Sensor And Modules, Students CornerLithium Lipo 18650 Cell Battery Charger Board BMS Protection Module HX-2S-01
Description
2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module is a small PCB mounted Li-ion Lithium Battery charger protection module. This small and smart battery charger protection module comes with the various features like Short circuit protection, Overcharge protection, Over-discharge protection, Overcurrent protection. It is very easy to install and convenient to use in all your DIY portable projects.
Pin Descriptions:
- B+ B-: The interface of battery core
- P+ P-: The connector of battery board
- MB: The connection point between the batteries
- B+: Battery V+ Positive
- B-: Battery V- Negative
- P+: Output / Charging V+
- P-: Output / Charging V-
Note:
The protection board cannot be used for lithium iron phosphate batteries, hernia lamps, hand drill battery pack, electric fish battery pack, electric bicycle battery pack, buggy battery, 775 (4A) above the motor, 1W fisheye LED lamp.
Package Includes :
1 x 2S 3A Li-ion Lithium Battery 7.4V 8.4V 18650 Charger Protection Board Module
Specifications and Features :
- Size: Approx. 36 x 6 x 1 mm(LxWxH).
- Over-Discharge Detection Voltage: 2.3-3.0V±0.05V
- Maximum Working Current: 3A
- Transient Current: 5A
- Operating Temperature : -40-50 C
- Internal Resistance: Less than 45m Ω
- B+ B-: The interface of battery core
- P+ P-: The connector of battery board
- MB: The connection point between the batteries
SKU: n/a -
Electronic Components, Students Corner
2K Variable Resistor
Description
Variable Resistor Potentiometer Volum Type:
A variable resistor is the most significant component found in many electrical devices for controlling the tone, bass as well as volume. This is due to the fact that resistors can be connected together with the other components to form filters for the desired level. They can also be used in computer monitors for color or positioning as well as dimming or switching lamps. This is achieved through digital to analog and analog to digital circuits; one additional advantage is that the knob can be turned instead of typing a value every time you want to change the tint or brightness.
SKU: n/a -
Battery & Cells, Students Corner
CP12170 12V 17Ah Battery
Vision CP12170 valve regulated lead acid batteries are designed for use in a variety of applications including alarm systems, emergency lighting systems, uninterruptible power supplies, medical equipment and much more.
For Details Download: https://www.osibatteries.com/Images/document/CP12170E.pdf
Specifications:
Vision CP12170 Battery Specifications:Chemistry: Rechargeable Sealed Lead Acid Voltage: 12v Nominal Capacity: 17Ah Dimensions in Inches (L x W x H): 7.13 x 3.03 x 6.57 Terminals: NB Weight (lbs): 12.6 Warranty: 12 months Condition: Brand New Notes: 3-5 Year Design Life Features:
- Low self discharge.
- UL-recognized component.
- Maintenance-free operation.
- Can be mounted in any orientation
- Long service life, float or cyclic applications
- Case and cover available in both standard and flame retardant ABS.
- Computer designed lead, calcium tin alloy grid for high
power density.
- Not restricted for air transport-complies with IATA/ICAO
Special Provision A67.
- Absorbent Glass Mat (AGM) technology for efficient gas
recombination of up to 99% and freedom from
electrolyte maintenance or water adding.
Package Include:
- 1 x CP12170 12V 17Ah Battery
SKU: n/a -
Accessories, Students Corner
Raspberry Pi 4 Model B ABS Case Plastic Box
Introduction :
This is the plastic case made for Raspberry Pi 4 , perfect fit for it. It has fully enclosed design to protect the Raspberry Pi , but remain the power , HDMI , A/V , USB and Ethernet ports. The cover can easyly remove to get access to the Raspberry Pi board when you want to use the GPIO , POE or camera.
Specification :
1. Material : ABS
2. Weight : 55g approx
3. Color : White / White
4. Use for : Raspberry Pi
Feature :
1. Made by ABS material , has less effect for wifi and bluetooth signal. 2. Fully enclosed design to protect the Raspberry Pi , but remain the power , HDMI , A/V , USB and Ethernet ports. The cover can easyly remove to get access to the Raspberry Pi board when you want to use the GPIO , POE or camera.
Package list :
1 x ABS case
Best Online Shopping Website for Raspberry Pi 4 Model B ABS Case Plastic Box in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Regulators, Students Corner
TP4056 1A Li-ion Lithium Battery charging Module – Micro USB in Pakistan
This TP4056 1A Li-ion Lithium Battery Charging Module is made for charging rechargeable lithium batteries using the constant-current/constant-voltage (CC/CV) charging method. In addition to safely charging a lithium battery, TP4056 BMS Board also provides the necessary protection required by lithium batteries. The TP4056 is suitable for USB power and adapter power supplies. Due to the internal PMOSFET architecture and anti-reverse charging path, no external isolation diodes are required. Thermal feedback of the Protection Circuit automatically adjusts the charge current to limit chip temperature during high power operation or high ambient temperature conditions. The charging voltage is fixed at 4.2V, and the charging current can be externally set by a resistor. When the charging current drops to the set value of 1/10 after reaching the final float voltage, the TP4056 Li-ion Battery Charger Module will automatically terminate the charging cycle. When the input voltage (AC adapter or USB power) is removed, the TP4056 automatically enters a low current state, reducing the battery leakage current to less than 2uA. The 1A Micro USB Protection Board TP4056 can also be placed in shutdown mode when there is a power supply, reducing the supply current to 55uA.
Specifications of TP4056 Module:
- Charge module: Linear charging
- Current:1A adjustable
- Charge precision:1.5%
- Input voltage:4.5V-5.5V
- Full charge voltage:4.2V ± 1%
- Led indicator: red is charging Green is fully charged
- Input interface: micro USB/mini usb/type-c usb
- Work temperature:-10° to +85°
- Inversed polarity: NO
Features of TP4056 Module:
- Automatic Recharge.
- Undervoltage Lockout.
- Inversed polarity: NO.
- Current Protection: Yes.
- It is small size and lightweight.
- It has battery temperature sensing.
- specially designed for a single lithium battery charging.
- Fully machinery automated processing, all patch parts manufacturing.
- Use mature charging chip TP4056 for simple peripheral circuits, good protection performance, and high charging accuracy.
Package Include:
- 1 x TP4056 – 1A – Li-ion Lithium Battery charging Module
Best Online Shopping Website for TP4056 1A Li-ion Lithium Battery charging Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
DC-DC Buck 5A Charging Board ADJ Lithium Battery Charger XL4015
XL4015 DC-DC Constant Voltage Current Step Down Buck Converter Charging Board Lithium Battery Charger 5V-32V to 0.8V-30V Max 5A
This linear module has constant voltage and constant current function (CC CV). and it has a good performance.
When you use it as a charger. this module use good chip as core and it is stable. also its ripple is low to 50mV.
Specifications:
Size: 51 * 26.3 * 14 (L * W * H) (mm)
Operating Temperature: -40 ° to +85 °
Voltage Regulation: ± 2.5%
Load Regulation: ± 0.5%
Output ripple: 50mV (max) 20M bandwidth
Switching frequency: 300KHz
Conversion efficiency: 95% (the highest)
Output current: adjustable maximum 5A
Output voltage: 0.8V-30V
Input voltage: 5V-32V
Rectification: non-synchronous rectification
Module Properties: non-isolated constant current and voltage module.
Advantage:
CC CV
Low ripple
When the module charges a battery, it first use constant current to protect the battery. check the curse above.
Package Included:
1 x Step Down Buck Converter Charging BoardSKU: n/a -
Battery & Cells, Students Corner
Lilypad Coin cell battery holder
Product details of Lilypad Coin Cell Battery Holder CR2032 Arduino Ba
Lilypad Coin Cell Battery Holder CR2032 Arduino Battery Mount Module Lily Pad for Arduino Small Slide Switch BoardThe LilyPad is a set of sewable electronic pieces – including a small programmable computer called a LilyPad Arduino – which can be stitched together with conductive thread to create soft interactive garments and accessories.LilyPad Arduino Coin Cell Battery Holders provide the power for these e-textiles and wearables projects. With a holder for a 20mm coin cell battery such as a CR2032, these button battery boards feature 4 connection points (2 positive and 2 negative) which can be sewn in to fabric and attached to sensors and actuators with conductive thread or solder, and a convenient on/off switch.Ideal for schools, universities and group settings, or just interested amateurs with multiple or large scale projects, our LilyPad Coin Cell Battery Holder multipacks ensure you will always have plenty of power – just don’t forget the batteries!LilyPad Battery PowerLilyPad battery boards feature a holder for a 20mm coin cell battery and have 4 connection points (two positive and two negative) for soldering or sewing to sensors and actuators with conductive thread. They are an essential addition to any LilyPad Arduino project requiring a CR2032 or equivalent battery, keeping your wearable electronics powered up!On/Off Battery SwitchControl the power to your LilyPad project instantly with the coin cell battery holder’s in-line on/off switch. Easy to use (but hard to knock accidentally), the simple switch is a great way to save batteries when your project is not in use, without having to fiddle around physically removing the button battery from the LilyPad board.Battery Holder Multi-PackLilyPads can be instrumental in teaching coding, mathematics, basic electricity, electronic circuits, science and engineering, while adding a unique artistic design element. Our coin cell battery board is ideal for teachers to get their students programming, providing reliable power for any LilyPad Arduino classroom project.
SKU: n/a -
Electronic Components, Students Corner
VS1838B 38Khz IR Receiver
This is IR Receiving Head VS1838B Remote Control Receiver. The 1838B is miniaturized infrared receivers for remote control and other applications requiring improved ambient light rejection. The separate PIN diode and preamplifier IC are assembled on a single lead frame.The epoxy package contains a special IR filter. This module has excellent performance even in disturbed ambient light applications and provides protection against uncontrolled output pulses.Use this IR Receiver Diode – TSOP38238, a simple IR receiver for infrared remote control of your next project. With low power consumption and an easy to use package, it mates well with embedded electronics and can be used with common IR remotes.The TSOP382 is a miniaturized receiver for infrared remote control systems. A PIN diode and a preamplifier are assembled on a lead frame while the epoxy package acts as an IR filter. The demodulated output signal can be directly decoded by a microprocessor. The TSOP382 is compatible with all common IR remote control data formats.
VS1838B IR Sensor Specifications:
- Type: VS183108B Infrared Receiver
- Built-in: CMOSIC
- voltage: 2.7-5 .5 V
- Size: pin lenght:21mm
- Receiving distance:13-15M
VS1838B IR Sensor Features:
- Low power consumption.
- high-gain preamplifier IC.
- Strong anti-interference ability.
- wide-angle and long distance reception.
- Infrared remote control system used as a receiver .
- high-speed high-sensitivity PIN photodiode and a low -power.
- plus the use of epoxy resin dry outer shield anti- scratch design.
- Ultra- compact design package with outer shield anti-jamming capability.
- the product has been part of environmentally friendly products through REACH and SGS certification.
VS1838B IR Sensor Applications:
- Optical Switch.
- Multimedia Equipment.
- Light Detecting Portion of Remote Control.
- Home Appliances Such as Air Conditioner, Fan etc.
Package Include:
- 1 x VS1838B IR Receiver
Best Online Shopping Website for INFRARED RECEIVER 1838 RECEIVER VS1838 VS1838B 38KHZ INTEGRATED UNIVERSAL in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
9-Axis Accelerometer (MPU 9250)
Warm prompt: Dear buyer, Our cheapest transportation services Economic category logistics (SunYou Economic Air Mail ,China Post Ordinary Small Packet Plus ) can be traced only befor it arrive your country,please choose Standard category logistics if you want a full tracking info.
MPU-9250 modules ( three-axis gyroscope + triaxial accelerometer + triaxial magnetic field )
Use Chip : MPU-9250
Power supply :3-5v ( internal low dropout regulator )
Communication: IIC communication protocol standard
Chip 16bit AD converter 16 outputs the data
Gyro range : ± 250 500 1000 2000 ° / s
Acceleration range : ± 2 ± 4 ± 8 ± 16g
Magnetic field range : ± 4800uT
Using Immersion Gold PCB, machine welding process to ensure quality
2.54mm pin pitch
Module size 15mm * 25mmSKU: n/a -
Sensor And Modules, Students Corner
DC-DC Buck XL4016 5-40V To 1.2-35V 9A
- Material: board and electronic component
- Input voltage: 5-40V
- Colour: as the pic shows
- Output voltage: 1.2-35V (continuously adjustable)
- Output Current: 9A (power tube temperature exceeds 65°C please add cooling fan)
- Constant current range:0.2-9A ( adjustable )
- Output Power: Maximum power is about 300W (power tube temperature exceeds 65°C please add cooling fan)
- Size: Approx. 2.55*1.88*0.94inch / 6.5*4.8*2.4cm(Length*width*thickness)
SKU: n/a -
Sensor And Modules, Students Corner
Multipoint Communication 125 Channels
1.Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.2.125 Channels, Multi-point communication and frequency hopping to meet the communication needs3.Built-in hardware CRC error detection, Multipoint communication address control.4.Low-power 1.9 ~ 3.6V, only 1uA on Power down mode5.Built-in 2.4Ghz antenna6.Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.7.Built-in voltage regulator8.Standard DIP Pitch Interface for embedded applications9.size: 34mm X 17mm X 1mmPackage content:1* NRF24L01 RF Wireless Transceiver Module built-in 2.4GHz AntennaSKU: n/a -
Boards and Programmer, Students Corner
32GB SD Card With Pre-Loaded Noobs Software for Raspberry Pi
- Micros SD Card loaded with NOOBS.
- Other Operating Systems such as OpenElec, ArchLinux, Pidora, etc can be added just with a mouse click once you connect to internet
- You can select the Operating System at the time of booting and boot to any of the selected OS
- Class 10 – High Speed MicroSD Card boosts Raspberry Pi Performance
Package Include:
- 1 x 32Gb SD Card
Best Online Shopping Website for 32GB SD Card Raspberry Pi SD Card in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
RC Drones and Accessories, Students Corner
Pixhawk PX4 flight controller (Standard Kit)
Pixhawk PX4 autopilot PIX 2.4.8 32-bit flight controller
Features:
A new generation of 32-bit flight processors with strong incoming control, integrated PX4FMU + PX4IO on a single board
1. The advanced 32-bit ARM CortexM4 processor of high performance, can run NuttX RTOS real-time operating system;
2 14 PWM / servo output;
3 Bus interface (UART I2C SPI can);
4. Integrated backup power and backup controller fail, main controller fail backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant and failover power input;
7. Multi-color LED lights;
8. Multi-tone buzzer interface
9. Micro SD flight data recording;
Specifications:
Microprocessor
1.32 2MB flash STM32F427 Cortex M4, with processing unit floating point hardware
2 Frequency: 168 MHZ 256K RAM
3,32 STM32F103 Coprocessor
sensor
1. 3 – axis gyroscope digital L3GD20 16
2. Accelerometer 3-axis LSM303D 14 / magnetometer
3. MPU6000 6-axis accelerometer / magnetometer
4. MS5611 precision barometer
Interface
1. 5 High voltage compatible UART 1, 2 with hardware flow control
2 2
3. Spektrum DSM / DSM2 satellite receiver / DSM-X compatible input
4. Futaba SBUS compatible inputs and outputs
5. PPM signal
input 6. RSSI input (PWM or voltage)
7 I2C
8 SPI
VADC input 9.3.3 and 6.6
10. External MICRO USB interfaceSKU: n/a -
Sensor And Modules, Students Corner
HTC-2 Digital Thermometer Hygrometer with Clock
Digital Thermometer And Hygrometer HTC-2 are 3 in 1 meter. This HTC 2 humidity meter allows you to display time clock, temperature, humidity and alarm function with a single cell. This digital meter has temperature range: -50 ~ 70 degrees (-58 ~ 158 ° F), large character LCD display, easy to read, lower power consumption This temperature and humidity meter can show temperature, humidity and time display simultaneously. This thermo hygrometer has 2 temperature display modes: °C/°F, 2-time display modes: 12/24H7, Max/Min Temperature and humidity memory function. HTC 2 small humidity meter hourly chime function, daily alarm function, calendar display function (Month and date) and Integrated back stand for desktop use hanging hole for wall mounting.Specifications:- Weight: 150g
- Material: ABS
- Color: White + Black
- Humidity resolution: 1% RH
- Humidity accuracy: ±5% RH
- Humidity range: 10%~99% RH
- Temperature accuracy: ±°C (1.8°F)
- Temperature resolution: 0.1°C (0.2°F)
- Temperature range: -50°C~+70°C (-58°F~+158°F)
- Dimensions: 105x97x23mm, ( 4 3/16″ H x 3 7/8 ” W x 7/8″ Thick)
Features:- High stability & accuracy.
- Everyday alarm function.
- Low power consumption.
- Degree C & F unit selectable.
- Desk-top placing or Wall Hanging.
- The large LCD display, multi-function.
- The memory of MAX & MIN measuring value.
- 12 hour / 24-hour displaying system selectable.
- Indoor & outdoor temperature display, indoor humidity display, and time display.
Package Include:- 1 x HTC-2 Digital Thermometer Hygrometer with Clock
Best Online Shopping Website for HTC-2 Digital Thermometer Hygrometer with Clock in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Boards and Programmer, Students Corner
Alligator Test Clips
Features:
1. 100% brand new and high quality.
2. Durable, safe and easy to use.
3. Can be used in electrical or laboratory electric testing work.
4. Frequently used in school physics laboratories to quickly and cheaply assemble circuits. Useful for connecting components to wires.
5. Easy for installation and safe for use with the insulation plastic boots covered.
Specification:
Model : P1041
Material: Wire & Conductive Metal
Color: Red, Black
Current: 15A
Suitable For: Testing
Weight: Approx. 65g / 2.3oz
Total Length: Approx. 103cm / 40.6in
Lead Diameter: 0.5cm / 0.2in
Lead Length: Approx. 1.8cm / 0.7in
Package list:
2 * Testing Cables(red and black)
Feedback From Buyers:
SKU: n/a
ColgRoad Top Selling
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
Features Of TEC1-12705 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Important Note!! Heat side requires heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
CR2032 3V Coin Cell Battery in Pakistan
LiCB CR2032 or 2032 cell Lithium Coin batteries contain the substance manganese dioxide, which is chemically very stable. with high energy density and high voltage, a single 2032 Lithium Coin battery can replace two, three or more conventional batteries. If you’re looking for CR2032 batteries that are designed to provide reliable and long-lasting power, you’re at the right place.
For More Visit:
Specifications:
Features:
Applications:
Caution:
Package Include:
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
Features:
Package Include:
25W Submersible Water Pump
Specifications:
Attention:
Package Include:
RGB Remote Control Led Strip Light
Light up hallways, stairs, trails, windows of your home. It is applicable for automobile & Airplane model decoration, contour lighting or border. It comes with amazing features of 12 feet length and up to 300 LED quantity.
Specifications:
Features:
Applications:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95060 |
|
Power |
|
60w |
|
Light source |
|
300 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
800lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
530*240*90mm |
|
Battery |
|
3.2V 12AH |
|
Solar Panel Power |
|
6V 12W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
12V Car Washer Pump
Specifications:
Package Include:
IP66 100W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 100W |
|
Model |
ZL-TGD-100W |
Power |
100W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 100W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy.No fluorescent flickering.No hazard of mercury or lead entering the environment.Low power consumption, high intensity, low lumen attenuation.Recessed mounted, maintenance free, easy installation.Solid- state, high shock/ vibration resistant.Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Lumens |
4800 lm |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Surface Treatment |
Oxidation Treatment, Silver Treatment |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Power Factor |
0.90 |
Power Efficiency |
85% |
Features:
Package Include:
5M 12V LED Strip NEON Flexible Lights in Pakistan
12V Neon Flexible Strip Light IP65 Rating Size 16*12 5M Length Lamp Material Silica Gel
12V Neon Flexible Strip Lights Specifications:
12V Neon Flexible Strip Lights Features:
Package Include:
1 x 5M 12V LED Strip NEON Flexible Lights
Best Online Shopping Website for 5M 12V LED Strip NEON Flexible Lights Decoration Lights in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
120W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95120 |
|
Power |
|
120w |
|
Light source |
|
624 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1200lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
630*270*90mm |
|
Battery |
|
3.2V 18AH |
|
Solar Panel Power |
|
6V 18W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
12V 8W Shafi Solar Water Pump in Pakistan
DC 12V Solar Water Pump Specifications:
DC 12V Solar Water Pump Features:
Package Include:
Best Online Shopping Website for 12V Solar Water Pump in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
LED Bulb Raw Material
Specifications:
Package Include:
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
LED Room Strobe 12
Specifications:
Features:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation:
Package Include:
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.