Student Corner
-
Accessories, Students Corner
5V 2A Raspberry Pi Zero Power Adapter in Pakistan
5V 2A Power Supply AC/DC Adapter for Raspberry Pi Zero is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
- Input Voltage: 100-240V AC
- Output Voltage: 5V 2A
- Frequency: 50 / 60Hz
- Compatible With: Raspberry Pi Zero, Raspberry Pi 2, Orange Pi Zero, 2G-IOT and so on
Features:
- Simple to use, just Plug & Play.
- High Quality Graded AC to DC Power Adapter.
- Light in Weight and with Heavy Duty Cable wire.
- Short Circuit, Over Voltage, and Over Current Protection.
- Incredible Low Fault Rates ,this Power Supply is a Regulated Center Positive Power Supply.
Package Include:
- 1 x 5V 2A Raspberry Pi Zero Power Adapter
Best Online Shopping Website for 5V 2A Raspberry Pi Zero Power Adapter Charger in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad
SKU: n/a -
Sensor And Modules, Students Corner
3.5 inch LCD Touch Screen Display with HDMI for Raspberry Pi
3.5 Inch TFT LCD Touch Screen Display 320×240 SPI Interface 16 Bits 5V RPI LCD (A) V3 Touch Screen For Raspberry Pi P1 P2 P3
description:Size: 3.5 inchesPCB size: 55.6*85.42mmResolution: 320×240Touch IC: xpt2046LCD IC: ili9486 ili9488 R61581Interface: SPIVoltage: 5VApplicable models: Raspberry Pi P1 P2 P3Bit width: 16 bitsPackage Included:1×3.5 inch touch TFT LCD display, suitable for Raspberry pi (excluding Raspberry pi)SKU: n/a -
Sensor And Modules, Students Corner
DRV8825 Stepper Motor Driver Module With Heat Sink
DRV8825 stepper driver Module
The DRV8825 stepper motor driver carrier is a breakout board for TI’s DRV8825 micro-stepping bipolar stepper motor driver. The Stepper Driver module has a pinout and interface that are nearly identical to those of our A4988 stepper motor driver board, so it can be used as a higher-performance drop-in replacement for those boards in many applications. The DRV8825 Arduino stepper motor controller features adjustable current limiting, over-current, and over-temperature protection, and six micro-step resolutions (down to 1/32-step). It operates from 8.2 – 45 V and can deliver up to approximately 1.5 A per phase without a heat sink or forced air flow (rated for up to 2.2 A per coil with sufficient additional cooling).
Features Of Drv8825 Stepper Motor Driver RAMPS Heat Sink 3D Printer Motor Driver:
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Simple step and direction control interface
- Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step
- Adjustable current control lets you set the maximum current output with a potentiometer. Hence lets you use voltages above your stepper motor’s rated voltage to achieve higher step rates
- Intelligent chopping control that automatically selects the correct current decay mode (fast decay or slow decay)
- 45 V maximum supply voltage
- Built-in regulator (no external logic voltage supply needed)
- Can interface directly with 3.3 V and 5 V systems
- Over-temperature thermal shutdown, over-current shutdown, and under-voltage lockout
- Short-to-ground and shorted-load protection
- 4-layer, 2 oz copper PCB for improved heat dissipation
- Exposed solderable ground pad below the driver IC on the bottom of the PCB
Specifications Of Arduino DRV8825 Microstepping Bipolar Stepper Motor Controller:
- Model: DRV8825
- Supply Voltage: 8.2 – 42 VDC.
- Current Capacity : 2.2A max(24V).
- Continuous current per phase: 1.5 A.
- Minimum Logic voltage: 2.5V.
- Maximum Logic Voltage: 5V.
- Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32.
- Dimensions : 15 x 20 mm.
- Weight: 4 gm.
Package Include:
- 1 x DRV8825 stepper driver Module
Best Online Shopping Website DRV8825 stepper driver Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Electronic Components, Students Corner
4-Digit LED 0.56″ 7 Segments Display Module
1. Kuongshun Electronic Company is a collection of scientific research, design, production, maintenance and sales of high-tech enterprises. Founded in 1981, it is committed to intelligent robots, intelligent modules, electronic components, aerial, RC drone quadcopter, in the field of automation with professional standards and mature technology, we rapid rise in the field of foreign trade.
2. We have customers from both domestic market and oversea market. Kuongshun Sales managers can speak fluent English for good communication. Our main sales market:
Southern Europe 45.00%
North America 20.00%
Asia 20%
South America 6%
India 6%
Africa 3%
Our certification
FAQ
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral boxes and brown cartons. If you have legally registered patent,
we can pack the goods in your branded boxes after getting your authorization letters.Q2. What is your terms of payment?
A: Full payment. Goods would be shipped in 3-5 work days after payment received, finally depends on quantities.Q3. What is your terms of delivery?
A: EXW.Q4. How about your delivery time?
A: Generally, goods would be shipped in 3-5 work days after payment received, finally depends on order quantities.Q5. What is your sample policy?
A: We can supply the sample if we have ready parts in stock,Would our customer mind to pay the shipping cost?Q6. Do you test all your goods before delivery?
A: Yes, we have 100% test before deliveryQ7: How do you make our business long-term and good relationship?
1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them,
no matter where they come from.SKU: n/a -
Sensor And Modules, Students Corner
RF Wireless Module RX/TX Link Kit
Receiver module parameters1.Product Model: MX-05V2.Operating voltage: DC5V3.Quiescent Current: 4MA4.Receiving frequency: 433.92MHZ /315Mhz (optional)5.Receiver sensitivity:-105DB6.Size: 30 * 14 * 7mm7.External antenna: 32CM single core wire, wound into a spiralTechnical parameters of the transmitter head1.Product Model: MX-FS-03V2.Launch distance :20-200 meters (different voltage, different results)3.Operating voltage :3.5-12V4.Dimensions: 19 * 19mm5.Operating mode: AM6.Transfer rate: 4KB / S7.Transmitting power: 10mW8.Transmitting frequency: 433Mhz /315Mhz (optional)9.An external antenna: 25cm ordinary multi-core or single-core line10.Pinout from left → right: (DATA; VCC; GND)Application environmentRemote control switch, receiver module, motorcycles, automobile anti-theft products, home security products, electric doors, shutter doors, windows, remote control socket, remote control LED, remote audio remote control electric doors, garage door remote control, remote control retractable doors, remote volume gate, pan doors, remote control door opener, door closing device control system, remote control curtains, alarm host, alarm, remote control motorcycle remote control electric cars, remote control MP3.Remark1.VCC voltage module operating voltage and good power filtering;2.Great influence on the antenna module reception, preferably connected to the 1/4 wavelength of the antenna, typically 50 ohm single conductor, the length of the antenna 433M of about 17cm;3.Antenna position has also affected the reception of the module, the installation, the antenna as possible straight away from the shield, high pressure, and interference source; frequency used to receive, decode and oscillation resistor should match with the transmitter.Package Included:2 x Receiver module2 x Transmitter headSKU: n/a -
Sensor And Modules, Students Corner
9-Axis Accelerometer (MPU 9250)
Warm prompt: Dear buyer, Our cheapest transportation services Economic category logistics (SunYou Economic Air Mail ,China Post Ordinary Small Packet Plus ) can be traced only befor it arrive your country,please choose Standard category logistics if you want a full tracking info.
MPU-9250 modules ( three-axis gyroscope + triaxial accelerometer + triaxial magnetic field )
Use Chip : MPU-9250
Power supply :3-5v ( internal low dropout regulator )
Communication: IIC communication protocol standard
Chip 16bit AD converter 16 outputs the data
Gyro range : ± 250 500 1000 2000 ° / s
Acceleration range : ± 2 ± 4 ± 8 ± 16g
Magnetic field range : ± 4800uT
Using Immersion Gold PCB, machine welding process to ensure quality
2.54mm pin pitch
Module size 15mm * 25mmSKU: n/a -
Boards and Programmer, Students Corner
Arduino CNC Shield V3 for Stepper Motor A4988 DRV8825
Description
Best Online Shopping website for arduino cnc shield v3 a4988 driver board. Here you get arduino cnc shield v3 a4988 driver board in reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Quetta , Faisalabad and all over Pakistan.
This expansion board as a driver expansion board can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 or DRV8825 stepper motor driver, 4-axis Arduino CNC Shield v3. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.Specifications:
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Features
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- * * * Jumpers color may vary depending on the available stock.
NOT INCLUDED:
- Arduino Uno
- 1-4 Pololu A4988 compatible stepper drivers
SKU: n/a -
Sensor And Modules, Students Corner
13.56Mhz reader Card
1.Description:It is a IC+ID dual frequency card reader module.It integrates a high-performance card reader RF circuit and antenna,replacing the Wiegand data output protocol.2.Feature:1>.Wigan dual format output2>.Support dual frequency RFID card3>.Support ID+IC card3.Description:1>.Product Name:IC+ID Dual Frequency Card Reader Module2>.Working Voltage:DC 5V3>.Working Current:40mA4>.Support Reading:125kHZ and 13.56MHZ card reading5>.Interface:Wiegand6>.Work Temperature:-35℃~85℃7>.Work Humidity:5%~95%RH8>.Size:47*26*5mm4.Wiegand Interface Output Introduction:1>.When a card is sensed,the serial number of the card will be output through the two data lines Data0 and Data1.2>.Data0 and Data1 are high replacements without data output.3>.Data bit 0 produces a 400us width concatenation on the Data0 line.4>.Data bit 1 produces a 400us width concatenation on the Data1 line.5>.The length of each bit of data is 2400us.6>.Each Mifare card has a serial number of 4 bytes,and we output the last three bytes.7>.The first 12 even parity digits are added to the front and the last 12 odd parity digits are added to the back,for a total of 26 bits of data.8>.E.g:The card number is:6B 3D 12 D6The output data is:3D 12 D65.Applicable:1>.Attendance fingerprint reader module2>.Access control intercom card reader module6.Package:1>.1pc IC+ID Dual Frequency Card Reader Module2>.1pc WireSKU: n/a -
Sensor And Modules, Students Corner
Ky-040 360 degree Rotary Encoder Module in Pakistan
A 360 Degree Rotary Encoder is a Bread Board Friendly extremely precise module that provides an indication of how much the knob has been rotated AND what direction it is rotating in. It is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor / controllers into information such as speed, distance, and position. It’s a great device for stepper and servo motor control. You could also use it to control devices like digital potentiometers.
Specifications:
- Model: KY-040
- Working Voltage: 0-5V
- Resistance Value: 10K
- Type: Incremental Encoder
- Cycles/Revolution: 20
- Material: PCB + Brass
- Weight: 10g
- Size: 32 x 19 x 30mm
Package Include:
- 1 x Ky-040 360 degree Rotary Encoder Module
Best Online Shopping Website for Ky-040 360 degree Rotary Encoder Module Variable Potentiometer in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Electronic Components, Students Corner
PCB veroboard 2*8
- 100% Brand new and high quality PCB Board
- 10pcs PCB Prototype PCB Board Circuit Board Protoboard PCB Price Stripboard Veroboard 2 X 8 Double Side PCB Plate
- Hole Diameter : about 1.0mm
- Size of the PCB Board : 20X80X1.6 MM
- Item : 2 X 8 CM Double -Sided PCB Board
- Number of the PCB holes : 6X28=168(holes)
- package including : 10pcs 2*8 CM PCB Board Stripboard Veroboard Prototype Card Prototyping Circuit Double Sided Universal DOT Perfboard Breadboard Bricolage
-
SKU: n/a -
Boards and Programmer, Students Corner
BreadBoard mini
Description
Protoboard For Arduino Mini Breadboard PCB 170Tie-point SYB-170 Solderless Breadboard Module Electronic Solder-less breadboard is commonly used by students and hobbyists to quickly assemble an electronics project without using soldering station. These breadboards can be connected with one-another to make a larger board for complex projects.
SYB-170 Solderless Mini Breadboard Color Depends upon availability.
SKU: n/a -
Electronic Components, Students Corner
LM7824 7824 Voltage Regulator
7824 is a 24V Voltage Regulator that restricts the voltage output to 24V and draws 24V regulated power supply. The 7824 is the most common, as its regulated 24-volt supply provides a convenient power source for most TTL components.7824 is a series of 78XX voltage regulators (as known as L78xx, LM78xx, MC78xx…), the xx is replaced with two digits, indicating the output voltage (for example, the 7805 has a 5-volt output, while the 7812 produces 12 volts).
LM7824 Voltage Regulator Specifications:
- Output Type: Fixed
- Output Voltage: +24V dC
- Current Output: up to 1A
- Input Voltage: 27.1 – 40VDC?
- Quiescent (standby) current: 8mA
- Dropout Voltage (Max): 2 V @ 1A
- Polarity: Positive
- Operating Temperature: 0 to +125°C
- Mounting Style: Through Hole
- Pin Spacing Pitch: 2.54mm
- Hole Diameter: 3.8mm
- Dimensions: 10.4 x 4.6 x 9.15mm
LM7824 Voltage Regulator Features:
- Fixed 24V voltage regulators
- Thermal overload protection
- Short circuit protection
- Output transition SOA protection
- Heatsink is required
LM7824 Voltage Regulator Applications:
- Circuits requiring steady 24v supply
- Protection for devices having specific voltage sensitivity
- DIY projects requiring specific voltage from an existing higher/ varying voltage supply
LM7824 Voltage Regulator Circuit:
Package Include:
- 1 x LM7824 Voltage Regulator
Best Online Shopping Website for LM7824 7824 Voltage Regulator 24V Voltage Regulator in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Boards and Programmer, Students Corner
ST-LINK V2 STLINK Mini STM8 STM32 Programmer in Pakistan
ST Link V2 Programmer For STM8 and STM32 is fully consistent with the official version, support for automatic upgrades, support the full range STM32 SWD (only 4pins including SWCLK, SWDIO, and power) and a full range STM8 SWIM (only 4pins including SWIM, Reset and power) download and debug.Use this device to send program code to the 32-bit STM32 ARM Cortex or 8-bit STM8 microcontrollers. The header for this ST-Link v2 programmer contains connections for 5V, 3.3V, SWCLK, SWDIO, SWIM, Reset (RST/NRST) and GND. The connector on the opposite side of this device is a USB connector and is intended to be plugged into the computer.
STLINK V2 STM32 Programmer Specifications:
- Operating temperature 0 to 50°C
- SWIM cable for connection to the application
- Direct firmware update feature supported (DFU)
- SWIM low-speed and high-speed modes supported
- Status LED which blinks during communication with the PC
- 1.65 V to 5.5 V application voltage supported on SWIM interface
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
STLINK V2 STM32 Programmer Features:
- Shell characters using laser engraving, never fade off! Permanent clarity!
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 500MA internal resettable fuse, complete protection of your expensive computer motherboard!
- Red and blue color LED indicator, allowing you to always observe ST-LINK V2 working condition!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V
Package Include:
- 1 x STLINK V2 STM32 Programmer
Best Online Shopping Website for STLINK V2 STM32 Programmer in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
Note:
Product is Available in Multiple Colors Will be Shipped Randomly
SKU: n/a -
Boards and Programmer, Students Corner
Arduino MEGA Proto Shield BreadBoard Module in Pakistan
The prototyping protector makes it easy to design custom circuits. You can solder components to create your project’s prototyping area, or use it with a small breadboard (not included) to quickly test solderless circuit ideas. It has additional connections for all I / O pins, and has room to mount through hole and surface mount ICs. A practical way to make your custom circuit and module.The maximum length and width of the Proto Shield PCB are 2.7 and 2.1 inches, respectively. Three screw holes allow the protector to be attached to a surface or box. Note that the distance between digital pins 7 and 8 is 160 thousand (12:16 “), not even a multiple of the distance of 100 thousand to the other pins.
Package Include:
- 1 x Arduino MEGA Proto Shield BreadBoard Module
Best Online Shopping Website for Arduino MEGA Proto Shield BreadBoard Module in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a
ColgRoad Top Selling
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95180 |
|
Power |
|
180w |
|
Light source |
|
900 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1700lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
760*290*90mm |
|
|
Battery |
|
3.2V 24AH |
|
Solar Panel Power |
|
6V 24W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
Features:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy.No fluorescent flickering.No hazard of mercury or lead entering the environment.Low power consumption, high intensity, low lumen attenuation.Recessed mounted, maintenance free, easy installation.Solid- state, high shock/ vibration resistant.Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Lumens |
4800 lm |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Surface Treatment |
Oxidation Treatment, Silver Treatment |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Power Factor |
0.90 |
Power Efficiency |
85% |
Features:
Package Include:
25W Submersible Water Pump
Specifications:
Attention:
Package Include:
50W 5000LM Street Light
HZB
F1 Series LED street light, newest ultra-thin but good heat dissipation design,
simple structure, Streamline design, surface spray treatment, high temperature
resistance, good weather resistance; optimal integration.
Specifications:
Model |
HZB-LD-F1-50W |
||
Power |
50W |
||
Lumens |
5000lm±10% |
||
Size(mm)(LxWxH) |
398*139*50 |
||
Color Temp |
6500K |
||
Operation Temp |
-40°- 60°C |
||
Life Span |
50,000 hours for LED |
||
Driver |
High efficiency driver |
||
Voltage range |
AC110-240V |
||
Frequency |
50/60Hz |
||
Beam Angle |
120 degree |
||
CRI |
>70 |
||
PF |
≥0.90 |
||
Power Efficiency |
≥90% |
Features:
IP66.
Light.
Universal.
Wall or on the Pole.
can be as per your request.
High Quality Aluminum, Rapid Cooling.
Applications:
High ways.
Street, Bridge, Pavement.
Parking Garage, Parking Lot.
School, Residential, Park and Other Outdoor Places.
Package
Include:
5M 12V LED Strip NEON Flexible Lights in Pakistan
12V Neon Flexible Strip Light IP65 Rating Size 16*12 5M Length Lamp Material Silica Gel
12V Neon Flexible Strip Lights Specifications:
12V Neon Flexible Strip Lights Features:
Package Include:
1 x 5M 12V LED Strip NEON Flexible Lights
Best Online Shopping Website for 5M 12V LED Strip NEON Flexible Lights Decoration Lights in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
IP66 100W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 100W |
|
Model |
ZL-TGD-100W |
Power |
100W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 100W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
LED Room Strobe 12
Specifications:
Features:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
Main Stem: Cast Iron
Voltage Input: DC12V
Weight: 8lbs
Inlet/ Outlet Port Fitting: 3/4
Rated Power:175w
Rate Current: 13A
Max Flow: 40L/minute
No-Load: 4500RPM
used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
Max Suction Distance:5m
Head:10m
Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
Base Size: 3-1/2″ X 4-1/4″
Power Corded 6ft Aprox
Features:
Package Include:
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
RGB Remote Control Led Strip Light
Light up hallways, stairs, trails, windows of your home. It is applicable for automobile & Airplane model decoration, contour lighting or border. It comes with amazing features of 12 feet length and up to 300 LED quantity.
Specifications:
Features:
Applications:
Package Include:
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
LED Bulb Raw Material
Specifications:
Package Include:
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
50W LED Outdoor Light
50W LED Outdoor Light is the best use LED light for your daily routine.Has different features like no shadow, 80% energy-saving and environment-friendly, standard thick aluminium and tempered glass, IP66 waterproof etc. You can use this led light where you want to brighten with best energy-saving like your outdoor areas, landscape lighting, stage fountain cast light, building lighting, billboard lighting, hotels, bars, dance halls and other places of entertainment lighting and decoration.
Specifications:
Features:
Applications:
Attentions:
Package Include:
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95060 |
|
Power |
|
60w |
|
Light source |
|
300 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
800lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
530*240*90mm |
|
Battery |
|
3.2V 12AH |
|
Solar Panel Power |
|
6V 12W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation:
Package Include:
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.