,

13.56Mhz reader Card

Availability:

In stock


1.Description:
  It is a IC+ID dual frequency card reader module.It integrates a high-performance card reader RF circuit and antenna,replacing the Wiegand data output protocol.
 
2.Feature:
  1>.Wigan dual format output
  2>.Support dual frequency RFID card
  3>.Support ID+IC card
 
3.Description:
  1>.Product Name:IC+ID Dual Frequency Card Reader Module
  2>.Working Voltage:DC 5V
  3>.Working Current:40mA
  4>.Support Reading:125kHZ and 13.56MHZ card reading
  5>.Interface:Wiegand
  6>.Work Temperature:-35℃~85℃
  7>.Work Humidity:5%~95%RH
  8>.Size:47*26*5mm
 
4.Wiegand Interface Output Introduction:
  1>.When a card is sensed,the serial number of the card will be output through the two data lines Data0 and Data1.
  2>.Data0 and Data1 are high replacements without data output.
  3>.Data bit 0 produces a 400us width concatenation on the Data0 line.
  4>.Data bit 1 produces a 400us width concatenation on the Data1 line.
  5>.The length of each bit of data is 2400us.
  6>.Each Mifare card has a serial number of 4 bytes,and we output the last three bytes.
  7>.The first 12 even parity digits are added to the front and the last 12 odd parity digits are added to the back,for a total of 26 bits of data.
  8>.E.g:The card number is:6B 3D 12 D6
             The output data is:3D 12 D6
 
5.Applicable:
  1>.Attendance fingerprint reader module
  2>.Access control intercom card reader module
 
6.Package:
  1>.1pc IC+ID Dual Frequency Card Reader Module
  2>.1pc Wire

GY17857.51GY17857.52

960-40.1

AGY17857.1AGY17857.2AGY17857.3AGY17857.4AGY17857.7

850.00

In stock

1.Description:
  It is a IC+ID dual frequency card reader module.It integrates a high-performance card reader RF circuit and antenna,replacing the Wiegand data output protocol.
 
2.Feature:
  1>.Wigan dual format output
  2>.Support dual frequency RFID card
  3>.Support ID+IC card
 
3.Description:
  1>.Product Name:IC+ID Dual Frequency Card Reader Module
  2>.Working Voltage:DC 5V
  3>.Working Current:40mA
  4>.Support Reading:125kHZ and 13.56MHZ card reading
  5>.Interface:Wiegand
  6>.Work Temperature:-35℃~85℃
  7>.Work Humidity:5%~95%RH
  8>.Size:47*26*5mm
 
4.Wiegand Interface Output Introduction:
  1>.When a card is sensed,the serial number of the card will be output through the two data lines Data0 and Data1.
  2>.Data0 and Data1 are high replacements without data output.
  3>.Data bit 0 produces a 400us width concatenation on the Data0 line.
  4>.Data bit 1 produces a 400us width concatenation on the Data1 line.
  5>.The length of each bit of data is 2400us.
  6>.Each Mifare card has a serial number of 4 bytes,and we output the last three bytes.
  7>.The first 12 even parity digits are added to the front and the last 12 odd parity digits are added to the back,for a total of 26 bits of data.
  8>.E.g:The card number is:6B 3D 12 D6
             The output data is:3D 12 D6
 
5.Applicable:
  1>.Attendance fingerprint reader module
  2>.Access control intercom card reader module
 
6.Package:
  1>.1pc IC+ID Dual Frequency Card Reader Module
  2>.1pc Wire

GY17857.51GY17857.52

960-40.1

AGY17857.1AGY17857.2AGY17857.3AGY17857.4AGY17857.7

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “13.56Mhz reader Card”

There are no reviews yet.