Student Corner
-
CNC and 3D Printers, Students Corner
T8 threaded rods
Please note: Image the same as a reference. Actual delivered goods shall prevail!
Type: Trapezoidal Screw
Stainless steel material: stainless steel
Lead means : Refers to the axial distance of the corresponding points of the two adjacent teeth on the same helix
Pitch of means : Refers to the axial distance of the corresponding points of the two adjacent teeth on the thread
Including: 1pc T8 lead screw + 1 pc nut
Please verify That Size And The Long What do you need?
SKU: n/a -
Sensor And Modules, Students Corner
Luminosity / Infrared Light Sensor (TSL2561)
The TSL2561 is an optical-to-digital converter that converts light intensity into a digital signal output with a direct I2C connection or SMBus interface. Each device is connected to a bandwidth photodiode and an infrared responsive photodiode on a separate CMOS integrated circuit that has the ability to provide a near-optical response of a 20-bit dynamic range. Two integrated ADCs convert the photocurrent into a digital output that represents the measurement of the illumination of each channel. This digital output can be the input of a microprocessor.
The TSL2561 is a high-speed, low-power, wide-range, programmable and flexible configuration of light intensity digital conversion chips. The chip can be widely used in the monitoring of various types of displays, in order to make the display provide the best display brightness and reduce the power consumption of the power supply under variable lighting conditions. It can also be used for street lighting control and security lighting. Many occasions. The main features of the chip are as follows:1. The upper and lower thresholds of the light intensity of the programmable configuration permit, and an interrupt signal is given when the actual illuminance exceeds the threshold;
2. Digital output conforms to the standard SMBus (TSL2560) and I2C (TSL2561) bus protocols;
3. Analog gain and digital output time programmable control;
4. In low power mode, the power consumption is only 0.75 mW
5. Automatically suppress light fluctuations of 50 Hz/60 Hz.
SKU: n/a -
Sensor And Modules, Students Corner
DS1302 LED Electronic Digital Clock Module 5V Rotating
2PCS LED Electronic Digital Clock Module DS1302 Rotation LED Display 51 SCM Learning BoardApplication:Computer
Condition:
Model Number:DS1302 Rotation LED Display
Item: Electronic Clock
Voltage Supply: 5V (Via mini USB interface, not by batteries)
Other accessories: Four Studs for Module Consolidation
Function:
1. Year, Month, Day, Time, Temperature Swtiches automatically, and the Interval time is 3-5 seconds.
2. Chime at the whole point: When you open the whole point timekeeping function, Chime at the whole point from 8:00 to 22:00. You also can turn off this function.
3. Alarm: With alarm in one channel, you can set the alarming time by random.
4. Temperature Alarm: When the ambient temperature is less than the minium setting temperature or higher than the maximum setting temperature, the module will alarm to remind you to turn on or turn off the air conditioning to keep your home with the moderate temperature.
5. Clock keep going when down: After tune the preset time, even if is off, after that, no need to re-set the time.
6, LED display model: the outer LED display model with up to 10
colour:As shown
Material:Pc+metal
size:Size: 81mmx81mm
Thickness:1.6mm
Thickness: 1.6mm
Package Contents:
2 x LED Electronic Digital Clock moduleSKU: n/a -
Sensor And Modules, Students Corner
RTD PT100 Temperature Sensor
Features:
- The available thread type is 1/2”.
- The structure is simple and easy to install.
- 100% new product for all temperature controllers.
- Exquisite workmanship, high performance and high efficiency.
- Made of high quality stainless steel, anti-rust, anti-corrosion and durable.
- It has a wide measuring range and can measure temperatures from -200 to 420 degrees.
Specifications:
Condition:100% Brand New
Material: 201 Stainless steel
Color: As shown in the picture
Temperature Range: -200~420 degrees
Protection Tube Length: 50mm/2in, 100mm/3.9in, 200mm/7.9in, 400mm/15.7(Optional)
Pipe Diameter: 8mm
Thread Type: PT1/2”
Package List:
1* RTD (resistance temperature detection) with PT100 Temperature Sensor
1* Thread PT1/2”
1* Protection Tube
SKU: n/a -
Sensor And Modules, Students Corner
BF350-3AA Strain Gauge Resistive Pressure Sensor
A resistive strain gauge sensor with a 350 ohm nominal resistance which varies when a force is applied. By measuring the change in the sensors resistance a measurement of the force applied to it can be obtained. Note that strain gauges exhibit small changes in resistance and so this sensor should be used in a Wheatstone bridge configuration. If using with a microcontroller such as an Arduino we also recommend using our HX711 digital bridge sensor interface module.
Features:
- Nominal resistance(Ohm): 350
- Tolerance: <±0.1%
- Gauge factor: 2.00~2.20
- Gauge factor resistance: <±1%
- Strain limit: 2.0%
- Fatigue life: >10
- Metal foil: constantan alloy
- Working temperature range: -30~+80℃
- Temperature compensation: Aluminium(23)
- Gauge Grid(mm) Dimensions(L×M): 3.2 x 3.06
- Gauge Creep Code: M6 to O6
Application
SKU: n/a -
Sensor And Modules, Students Corner
Mini Submersible DC Water Pump 3-5V
Mini Submersible Pump 3-5V
This Mini Submersible Pump 3-5V is great for experiment, aquarium, and fountain etc. It is suitable for varieties of water such as city water, ground water and sea water.
Features:
- DC Voltage: 3-5V
- Low Noise
- Maximum Lift: 40-110cm / 15.75″-43.4″
- Flow rate: 80-120L/H
- Outside diameter of water outlet: 7.5mm / 0.3″
- Inside diameter of water outlet: 4.7mm / 0.18″
- Diameter: Approx. 24mm / 0.95″Length:Approx. 45mm / 1.8″
- Height: Approx. 33mm / 1.30″
- Material: engineering plastic
- Driving mode: brushless dc design, magnetic driving
- Continuous working life of 500 hours
Package Included:
1 x Micro Submersible Water Pump
SKU: n/a -
Sensor And Modules, Students Corner
3D Printer Smart Controller, Ramps 1.4 LCD 12864 Control Panel
3D Printer Small Parts Kit Ramps 1.4 Controller 12864 Control Panel LCD Screen Monitor Blue Motherboard Display Module.
3D printers use LCD control panel, they are ramp extension accessories. LCD control panel through which you can achieve spooling, the 3D model G code files are copied to the SD card, and then print the file through the LCD control panel. This version is an improved version of the reprap smart controller.Package includes: 1x 12864 LCD driver printed circuit board
SKU: n/a -
Sensor And Modules, Students Corner
DC 2.5-6V Low Noise Brushless Motor Pump120L/H Mini Micro Submersible Water Pump
Sensor And Modules, Students CornerDC 2.5-6V Low Noise Brushless Motor Pump120L/H Mini Micro Submersible Water Pump
Description:
Pump without power supply, power supply matched to the other, and water pump is a dc pumps, pump voltage 3 v, with DC3 – use 6 v power supply.
(cannot be used directly with 220 v ac voltage)DC Voltage: 2.5-6V
Working current: 130-220mA
Power: 0.4-1.5W
Maximum lift: 40-110cm / 15.75″-43.4″
Flow rate: 80-120L/H
Outside diameter of water outlet: approx. 7.5mm / 0.3″
Inside diameter of water outlet: approx. 4.7mm / 0.18″
Diameter: approx. 24mm / 0.95″
Length: approx. 45mm / 1.8″
Height: approx. 33mm / 1.30″
Wire length: about 15-20cm (red: ” + “, black(white): ” – “)
Material: engineering plastic
Driving mode: brushless DC design, magnetic driving
Continuous working life of 500 hoursSKU: n/a -
Boards and Programmer, Students Corner
Arduino Uno R3 Plus with USB Cable in Pakistan
The UNO is an FOR Arduino compatible board. It is based on FOR Arduino UNO Rev3 design. Some visible improvement on hardware make more flexible and easier to use. SPI, COM and IIC bus breakout make bus connect easier. The FOR Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.for Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. for Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP).The open-source IDE can be downloaded for free (currently for OS X, Windows, and Linux).
Arduino Uno R3 Plus Features:
- SPI, COM and IIC bus breakout make bus connect easier.
- The Uno R3 plus also adds SDA and SCL pins next to the AREF.
- The UNO R3 Plus is based on for Arduino UNO Rev3 design, it is fully compatible with Arduino.
- The Uno R3 plus works with all existing shields but can adapt to new shields which use these additional pins.
- It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
- It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
Package Include:
- 1 x Arduino Uno R3 Plus with USB Cable
Best Online Shopping Website for Arduino Uno R3 Plus with USB Cable in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
MAX7219 Dot matrix module
Description:
DIY Kits
1 single module can drive the an 8 * 8 dot matrix common cathode
2 the module Operating voltage: 5 v
The Module 3 dimensions: length 3.2 cm X 3.2 cm wide X 1.3 cm high
4 holes with four screws, the diameter of 3 mm
Five modules with input and output interfaces, support for cascading multiple modules
Wiring instructions:
1 on the left block to an input port, the an output port on the right.
2 the When the control of a single module, simple enter the port received a CPU
The When wining 3 modules cascaded output input termination CPU, the input output termination module of the first two modules of the first one, the first two modules of the termination input terminal of the three modules, and so.
The To 51 single example:
VCC 5 v
GND GND
DIN P2.2
CS P2.1
CLK P2.0SKU: n/a -
Electronic Components, Students Corner
Thermister resistor
Product Description
Keeping track on the set standards, we are highly engaged in providing the best quality of Thermistor Resistor. These granules are processed under the guidance of skilled experts. Our Thermistors are widely used in as inrush current limiter, temperature sensors (NTC type typically), self-resetting over current protectors, etc.
Features:
Exceptionally designed
Termite resistant
Available in variety of patternsSKU: n/a
ColgRoad Top Selling
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying a dc power source to a tec, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Using this TEC TEC1-12706 Thermoelectric cooler or thermoelectric Peltier get ice cold in minutes or heat to boiling by simply reversing the polarity.TEC12706 Cooling refrigeration Plate used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink water block to avoid burned one side is cooling (Printed model number)and another side is heating (Printed no word) when working. Please radiating the heating side
Note:
Power on the device only with the proper heat-sink setup to avoid any burning/damage or malfunction of the device, use a fine heat sink (such as in CPU fans) with thermal paste, and power the device. Use a 12v dc power supply to power the tec1-12706. Use one aa battery for 10- 20 seconds to power on the device to find the hot /cold side
Features Of TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt 50-60 Watt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
RGB Remote Control Led Strip Light
Light up hallways, stairs, trails, windows of your home. It is applicable for automobile & Airplane model decoration, contour lighting or border. It comes with amazing features of 12 feet length and up to 300 LED quantity.
Specifications:
Features:
Applications:
Package Include:
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
Features Of TEC1-12705 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Important Note!! Heat side requires heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”
12V Car Washer Pump
Specifications:
Package Include:
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
Main Stem: Cast Iron
Voltage Input: DC12V
Weight: 8lbs
Inlet/ Outlet Port Fitting: 3/4
Rated Power:175w
Rate Current: 13A
Max Flow: 40L/minute
No-Load: 4500RPM
used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
Max Suction Distance:5m
Head:10m
Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
Base Size: 3-1/2″ X 4-1/4″
Power Corded 6ft Aprox
Features:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
LED Bulb Raw Material
Specifications:
Package Include:
50W 5000LM Street Light
HZB
F1 Series LED street light, newest ultra-thin but good heat dissipation design,
simple structure, Streamline design, surface spray treatment, high temperature
resistance, good weather resistance; optimal integration.
Specifications:
Model |
HZB-LD-F1-50W |
||
Power |
50W |
||
Lumens |
5000lm±10% |
||
Size(mm)(LxWxH) |
398*139*50 |
||
Color Temp |
6500K |
||
Operation Temp |
-40°- 60°C |
||
Life Span |
50,000 hours for LED |
||
Driver |
High efficiency driver |
||
Voltage range |
AC110-240V |
||
Frequency |
50/60Hz |
||
Beam Angle |
120 degree |
||
CRI |
>70 |
||
PF |
≥0.90 |
||
Power Efficiency |
≥90% |
Features:
IP66.
Light.
Universal.
Wall or on the Pole.
can be as per your request.
High Quality Aluminum, Rapid Cooling.
Applications:
High ways.
Street, Bridge, Pavement.
Parking Garage, Parking Lot.
School, Residential, Park and Other Outdoor Places.
Package
Include:
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95060 |
|
Power |
|
60w |
|
Light source |
|
300 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
800lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
530*240*90mm |
|
Battery |
|
3.2V 12AH |
|
Solar Panel Power |
|
6V 12W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
LED Room Strobe 12
Specifications:
Features:
Package Include:
12V 8W Shafi Solar Water Pump in Pakistan
DC 12V Solar Water Pump Specifications:
DC 12V Solar Water Pump Features:
Package Include:
Best Online Shopping Website for 12V Solar Water Pump in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
120W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95120 |
|
Power |
|
120w |
|
Light source |
|
624 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1200lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
630*270*90mm |
|
Battery |
|
3.2V 18AH |
|
Solar Panel Power |
|
6V 18W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95180 |
|
Power |
|
180w |
|
Light source |
|
900 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1700lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
760*290*90mm |
|
|
Battery |
|
3.2V 24AH |
|
Solar Panel Power |
|
6V 24W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation: