- Accessories
10kΩ NTC Thermistor Thermal Resistor (NTC-MF52AT)
- Accurate 10kΩ NTC thermistor (R25 = 10kΩ) for precise temperature sensing
- Negative Temperature Coefficient (NTC) behavior for responsive measurement
- Compact epoxy-coated bead design for fast thermal response and durability
- High stability and repeatability for reliable long-term use
- Easy to integrate into HVAC, battery packs, chargers, 3D printers, and DIY circuits
- Affordable and suitable for both hobbyist and industrial applications
SKU: n/a - Accessories
LDR Light Dependent Resistor (Photoresistor) (GL5506 5mm)
- GL5506 5mm LDR (photoresistor) that changes resistance with light intensity
- High resistance in darkness (megaohm range) and low resistance in bright light (kiloohm range)
- Compact 5mm sensing area for stable and reliable detection
- Simple two-terminal design for easy interfacing with microcontrollers and analog circuits
- Perfect for Arduino, Raspberry Pi, solar garden lights, light-sensitive alarms, and automation projects
- Easy to integrate into light detection, brightness control, and sensor applications
SKU: n/a - Accessories
1N4148 Zener Diode (100V 0.2A)
– 1N4148 Zener diode for voltage regulation and clamping
– Maximum reverse voltage: 100V
– Forward/current handling: 200mA (0.2A)
– Fast switching speed in the nanoseconds range
– Compact DO-35 glass package for reliable PCB mounting
– Ideal for over-voltage protection, signal processing, and digital circuitsSKU: n/a - Accessories
1N4007 Rectifier Diode (1000V 1A)
- High reverse voltage: 1000V rating for reliable protection in high-voltage circuits
- Forward current: 1A continuous for general-purpose rectification
- Peak surge capability: 30A single-pulse surge withstand
- Low forward voltage drop: ~1.1V at 1A for efficient power conversion
- Robust DO-41 package with wide temperature range (-55°C to +150°C)
- Ideal for bridge rectifiers, adapters, chargers, and reverse polarity protection
SKU: n/a - Accessories
1N4001 Rectifier Diode (50V 1A)
– General-purpose 1N4001 silicon rectifier diode (50V, 1A)
– Continuous forward current: 1A; Peak surge current: 30A
– Low forward voltage drop (~1.1V) for efficient rectification
– DO-41 axial lead package for easy through-hole mounting
– Ideal for AC to DC conversion, power supplies and battery chargers
– Common use: reverse polarity protection and hobby electronics projectsSKU: n/a - Accessories
2N2222 NPN Transistor (60V 0.8A)
– General-purpose NPN BJT for switching and amplification
– Collector-Emitter Voltage: 60V
– Collector Current: up to 0.8A
– Fast switching speed, ideal for PWM and digital logic
– Compact TO-92 package for breadboards and PCBs
– Great for robotics, relay drivers, LED and motor controlSKU: n/a - Accessories
BC557 PNP Transistor (45V 0.1A)
- General-purpose PNP bipolar junction transistor for low-power circuits
- Maximum collector-emitter voltage: 45V
- Maximum collector current: 100mA (0.1A)
- Low-noise performance and high DC current gain (hFE 110–800)
- Power dissipation: 500mW in TO-92 package
- Ideal for switching, signal processing, and small-signal amplification
SKU: n/a - Accessories
BC548 NPN Transistor (30V 0.1A)
– General-purpose NPN bipolar junction transistor for low-power switching and amplification
– Maximum Collector-Emitter Voltage (Vce): 30V
– Maximum Collector Current (Ic): 100mA; Power Dissipation: 500mW
– DC Current Gain (hFE): 110–800 depending on variant (A, B, C)
– TO-92 through-hole package — ideal for breadboards and prototyping
– Common uses: audio stages, LED drivers, relay drivers, signal amplification, DIY and educational projectsSKU: n/a - Accessories
BC547 NPN Transistor (50V 0.3A)
- General-purpose NPN BJT in TO-92 package for low-current, medium-voltage circuits.
- Collector-emitter voltage (Vce): 50V, Collector current (Ic): 0.3A maximum.
- DC current gain (hFE) varies by version: A, B, C (approx. 110 to 800).
- Low noise performance ideal for audio preamplifiers and RF circuits.
- Transition frequency around 300 MHz and power dissipation about 500 mW.
SKU: n/a - Sensors And Modules
LM35DZ Temperature Sensor
- Linear Celsius output: 10mV per °C for direct temperature readings
- High accuracy: ±0.5°C at 25°C for reliable measurements
- Operating range: 0°C to 100°C; supply 4V to 30V
- Low power consumption: typically less than 60µA to minimize self-heating
- Compact TO-92 package for easy mounting in circuits
- No external calibration required; simple integration with microcontrollers
- Compatible with Arduino, Raspberry Pi, PIC, AVR, and other microcontrollers
SKU: n/a - Sensors And Modules
DS18B20 Temperature Sensor
- Digital temperature sensor with 1-Wire communication for simple wiring and multi-drop networks
- Accurate readings from -55°C to +125°C with ±0.5°C accuracy ( -10°C to +85°C )
- Programmable 9 to 12 bit resolution to balance speed and precision
- Operates from 3.0V to 5.5V and supports parasitic power mode
- Unique 64-bit serial code lets you connect many sensors on the same bus
- Available in TO-92 package and waterproof stainless-steel probe for versatile installations
SKU: n/a - Accessories
TIP122 NPN Darlington Power Transistor (100V 5A)
- High-gain NPN Darlington transistor for easy drive from logic and microcontrollers
- Collector-emitter voltage (Vce) up to 100V
- Continuous collector current (Ic) rated at 5A
- Very high current gain (hFE typically >1000) with low base current requirement
- TO-220 package for straightforward mounting and efficient heat dissipation
- Ideal for motor drivers, power switching, relay and solenoid drivers, and amplifiers
SKU: n/a - Buck, Boost Converters and Regulators
L7805 Voltage Regulator DC-DC
– Fixed +5V DC output for powering 5V logic and microcontrollers
– Input voltage range: 7-35V DC
– Output current up to 1A (with appropriate heat sink)
– Built-in thermal shutdown, current limiting, and short-circuit protection
– TO-220 package for easy mounting and heat sinking
– Low cost, easy to use — ideal for DIY and educational projectsSKU: n/a - Buck, Boost Converters and Regulators
LM317 Adjustable Voltage Regulator DC-DC
– Adjustable output voltage: 1.25V to 37V
– Output current up to 1.5A
– Built-in current limiting and thermal protection
– High stability and reliable performance
– Ideal for power supplies, battery chargers, and LED drivers
– TO-220 package, easy to mount and heat-sinkSKU: n/a - Integrated Circuits (ICs)
NE556 Dual Timer IC (DIP)
– Contains two independent NE555 timers in a single DIP package
– Ideal for timing, PWM, and oscillator circuits
– Operates in monostable and astable modes for flexible timing
– Wide supply range: 4.5 V to 16 V for versatile use
– High output drive capability suitable for LEDs and motors
– Breadboard and PCB friendly DIP package for prototypingSKU: n/a - Integrated Circuits (ICs)
NE555 Timer IC (DIP)
– Versatile NE555 Timer IC in an easy-to-use 8-pin DIP package
– Operates in monostable, astable, and bistable modes
– Wide supply range: 4.5 V to 15 V for TTL and CMOS compatibility
– High output current to drive LEDs, relays, or small speakers
– Ideal for timers, oscillators, PWM, and audio tone generation
– Stable, reliable performance with minimal external componentsSKU: n/a - Integrated Circuits (ICs)
74386 Quad 2-Input XOR Gate IC (DIP)
- Contains four independent 2-input Exclusive-OR (XOR) gates in one DIP package
- Designed with standard TTL logic compatibility for reliable digital performance
- Ideal for adders, parity generators, error detection, and comparators
- DIP package is breadboard-friendly and suitable for through-hole PCB projects
- Low power consumption with high noise immunity for stable switching
SKU: n/a - Integrated Circuits (ICs)
L293D Dual H-Bridge Motor Driver IC (DIP)
– L293D Dual H-Bridge Motor Driver IC in a 16-pin DIP package for easy prototyping
– Drives 2 DC motors or 1 stepper motor with independent direction control
– Bidirectional motor control (forward and reverse) with PWM speed input
– Up to 600mA continuous output per channel, 1.2A peak
– Wide supply voltage range: 4.5V to 36V
– Built-in clamp diodes for back EMF protection; TTL/CMOS compatible inputsSKU: n/a - Integrated Circuits (ICs)
CD4511 BCD to 7-Segment Decoder/Driver IC (DIP)
– Converts 4-bit BCD input into 7-segment outputs for LED displays
– CMOS design with low power consumption and wide supply range (3V to 15V)
– Includes LE (Latch Enable), LT (Lamp Test), and BI (Blanking Input) control pins
– Directly drives common cathode 7-segment LED displays without extra drivers
– Available in easy-to-use DIP-16 package for breadboard and PCB integration
– Ideal for clocks, counters, calculators, and other numeric display systemsSKU: n/a - Integrated Circuits (ICs)
CD4071 Quad 2-Input OR Gate IC (DIP)
– Contains 4 independent 2-input OR gates in a single 14-pin DIP package
– CMOS technology for low power consumption and high reliability
– Wide supply voltage range: 3 V to 15 V for flexible system design
– High noise immunity and TTL/CMOS logic compatibility
– Ideal for digital logic, control systems, timing circuits, and education
– Standard DIP footprint for easy prototyping and breadboard useSKU: n/a
- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 23 products sold
- On College Road from 2025
- Owner: Sharafat Shahzad
