-
Batteries, Cells and Power Supply, Boards, Modules and Accessories
LiPo Battery Charging Module 2A (TP5100)
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesLiPo Battery Charging Module 2A (TP5100)
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devicesSKU: n/a -
Batteries, Cells and Power Supply, Boards, Modules and Accessories
Power Bank Module for 18650 Cells Battery
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesPower Bank Module for 18650 Cells Battery
- Build your own portable power bank using 18650 lithium-ion cells.
- Integrated LCD display for real-time battery charge and voltage readouts.
- Includes rechargeable 18650 module for immediate use.
- Built-in battery management system (BMS) for overcharge, over-discharge and short-circuit protection.
- USB output lets you charge smartphones, tablets and other USB devices.
- Compact, lightweight design ideal for DIY projects and outdoor use.
- Order now for fast delivery in Islamabad.
SKU: n/a -
Boards, Modules and Accessories
18650 Li-Ion Battery Pure Nickel Strip (1P) in 1 Meter Length
– 1 meter roll of 100% pure nickel strip, ideal for 18650 Li-Ion cells
– 0.15 mm thickness for optimal balance of flexibility and strength
– Designed for spot welding: low-resistance, reliable connections
– Corrosion-resistant and heat-tolerant for long-lasting battery packs
– Cuts cleanly with scissors or shears; perfect for DIY and professional buildsSKU: n/a
LiPo Battery Charging Module 2A (TP5100)
In stock
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devices
₨ 180 ₨ 300
In stock
LiPo Battery Charging Module 2A (TP5100) – Product Overview
The LiPo Battery Charging Module 2A (TP5100) is a compact, high-efficiency charger designed specifically for lithium polymer batteries. Engineered for fast, safe charging, the TP5100 is ideal for hobbyists, makers, and product designers who need reliable charging for single-cell (3.7V) and dual-cell (7.4V) LiPo packs.
Key Benefits
- Fast charging up to 2A reduces downtime for battery-powered projects.
- Wide 5V to 18V input range supports USB sources, DC adapters, and solar panels.
- Integrated protections preserve battery life and prevent damage during charging.
- Small form factor allows seamless integration into portable electronics, drones, and DIY systems.
Features of the TP5100 LiPo Battery Charging Module
High-Performance Charging
The TP5100 module delivers up to 2A of charge current using a two-stage CC/CV charging algorithm. In Constant Current (CC) mode it supplies a steady charge current until the cell voltage reaches the target threshold; it then switches to Constant Voltage (CV) mode to top the battery off safely.
Wide Input Voltage Compatibility
Operate the module from a variety of power sources thanks to its 5V to 18V DC input range. This makes the TP5100 suitable for USB powerbanks, wall adapters, bench supplies, and small solar setups.
Battery Compatibility
- Single-cell LiPo: nominal 3.7V
- Dual-cell LiPo: nominal 7.4V
Comprehensive Protection Features
Safety is built in. The module includes:
- Overcharge protection to prevent battery damage when full
- Over-discharge protection to avoid deep discharge
- Short-circuit protection to protect both the battery and the module
- Thermal protection to reduce charge current or shut down if temperatures rise
Status Indicators
Simple LED feedback shows charging and fully charged states, making it easy to monitor progress at a glance during development or field use.
Technical Specifications
- Model: TP5100 LiPo Battery Charging Module
- Maximum Charging Current: 2A
- Input Voltage: 5V to 18V DC
- Battery Compatibility: Single-cell (3.7V) and Dual-cell (7.4V) LiPo
- Charging Modes: Constant Current (CC) and Constant Voltage (CV)
- Protections: Overcharge, Over-discharge, Short-circuit, Thermal
- Status Indicators: LEDs (charging / fully charged)
- Form Factor: Compact PCB module for easy integration
Applications
- DIY electronics and maker projects
- Portable and wearable devices
- Drones, RC vehicles, and hobby electronics
- Solar-powered battery charging systems
- Battery-powered prototypes and embedded systems
Installation and Usage Tips
- Verify battery cell count and wiring before connecting to avoid incorrect voltage selection.
- Use an appropriate power source within the 5V to 18V range to ensure stable charging.
- Monitor initial charges to confirm LED indications and expected charging behavior.
- Ensure adequate ventilation if charging at high current to help manage heat.
- For long-term installations, consider adding a fuse or PTC for additional safety.
Why Choose the TP5100 LiPo Battery Charging Module
The TP5100 combines fast 2A charging performance with robust safety features and flexible input compatibility. Its compact size and high efficiency make it a top choice for anyone needing a reliable LiPo charging solution in compact or portable projects.
Note: Images are for illustration purposes only.
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.83 rating from 572 reviews
-
Boards, Modules and Accessories, Sensors And Modules
MQ-7 Carbon Monoxide (CO) Gas Sensor Module
- CO Detection: Highly sensitive to carbon monoxide (CO) gas.
- Wide Range: Detects 20-2000 ppm CO for home, industrial, and environmental use.
- Analog and Digital Outputs: Provides 0-5V analog and threshold-based digital outputs.
- Adjustable Sensitivity: Onboard potentiometer to fine-tune digital trigger levels.
- Fast Response: Quick reaction and recovery for real-time monitoring.
- Easy Integration: Standard pin headers compatible with Arduino, Raspberry Pi, and other microcontrollers.
SKU: n/a -
DIY School Kits
T-M340 Lifting Gateway Door DIY Learning Kit
– Motorized lifting gate simulation for hands-on automation learning
– Demonstrates rotational-to-linear motion using pulleys and levers
– Includes DC motor, switch, wiring, battery holder and assembly parts
– STEM-focused DIY kit ideal for classrooms, science fairs, and hobbyists
– Durable wood and plastic components built for repeated educational use
– Beginner to intermediate skill level; assembly time approximately 30–45 minutesSKU: n/a -
Boards, Modules and Accessories, Accessories
Big Dotted Veroboard (10cm x 24cm)
- Large 10cm x 24cm board – ideal for complex circuits and multi-project layouts.
- Dotted pre-drilled layout with standard 2.54mm pitch for flexible component placement.
- Durable phenolic construction for strength and repeated use.
- Copper-clad side for reliable solder joints and stable electrical connections.
- Versatile for prototyping, DIY electronics, education, and experimentation.
- Compatible with standard 2.54mm leaded components, ICs, resistors and capacitors.
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
GP2Y1010AU0F Compact Optical Air Quality Dust Sensor Module
Boards, Modules and Accessories, Sensors And ModulesGP2Y1010AU0F Compact Optical Air Quality Dust Sensor Module
– Accurate PM2.5 detection using the GP2Y1010AU0F optical sensor
– Real-time dust monitoring with fast response time
– Compact 45 × 30 × 18 mm module ideal for DIY and tight enclosures
– Analog output for easy integration with Arduino, Raspberry Pi and HVAC systems
– Low power, cost-effective solution for indoor air quality and environmental monitoring
– Suitable for smoke detection, workshops, cleanrooms and smart home hubsSKU: n/a -
STEM & DIY Learning Kits
4WD Acrylic Robot Car Chassis
– High-torque 4WD robot car chassis built for rugged and indoor terrain
– Imported acrylic frame with metal supports for strength and low weight
– Four DC geared motors and rubber-tread multi-terrain wheels
– Universal board support: Arduino, Raspberry Pi, NodeMCU and more
– Spacious, optimized layout for sensors, batteries, drivers and AI modules
– Ideal for STEM education, AI rovers, autonomous navigation and hobby buildsSKU: n/a -
Batteries, Cells and Power Supply, Sensors And Modules
200A High-Precision Watt Meter and Power Analyzer
Batteries, Cells and Power Supply, Sensors And Modules200A High-Precision Watt Meter and Power Analyzer
- High-precision DC power analyzer measuring up to 200A current capacity
- Real-time monitoring of voltage, current, power, energy (Wh), and capacity (Ah)
- Bidirectional measurement capability for charging and discharging analysis
- Backlit LCD display with multi-parameter simultaneous readings
- Easy inline installation with durable, heat-resistant design
- Perfect for solar systems, battery monitoring, RC applications, and DC motors
SKU: n/a
Related products
-
Boards, Modules and Accessories, Motors, Drivers and Wheels
L293D 4-Channel Motor Driver Module
– Dual H-bridge driver for two DC motors or one bipolar stepper motor
– Logic-level inputs compatible with Arduino and Raspberry Pi
– Built-in flyback diodes and thermal protection for reliable operation
– Supports motor voltages up to 36V; ~600 mA continuous per channel, 1.2 A peak
– Simple PWM speed control and direction reversal
– Compact breakout with screw terminals and header pins for easy wiringSKU: n/a -
Boards, Modules and Accessories, Wireless Communication
SIM900A GSM GPRS Wireless Transmission Module
Boards, Modules and Accessories, Wireless CommunicationSIM900A GSM GPRS Wireless Transmission Module
- SIM900A chipset for reliable GSM/GPRS communication
- GPRS data rate up to 85.6 kbps
- Voice and SMS support for two-way communication
- UART interface for easy Arduino/Raspberry Pi integration
- Compact form factor suitable for embedded projects
- Operating voltage 3.4 V to 4.4 V
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
3-Axis Accelerometer Module Adxl345
- High-precision ADXL345 3-axis motion sensing for tilt, vibration and impact detection
- Selectable measurement ranges: ±2g, ±4g, ±8g, ±16g
- Digital I2C and SPI interfaces for Arduino, Raspberry Pi and microcontrollers
- Low-power operation with configurable power modes for battery projects
- Built-in FIFO, tap/double-tap, activity/inactivity, free-fall and orientation detection
- Compact, breadboard-friendly module ideal for wearables, drones, robotics and IoT
SKU: n/a -
Boards, Modules and Accessories, Display Modules and LCDs
4-Digits 7-Segment LED Display Module (TM1637)
Boards, Modules and Accessories, Display Modules and LCDs4-Digits 7-Segment LED Display Module (TM1637)
- 4-digit 7-segment LED module for clear numeric readouts
- TM1637 driver IC with simple 2-wire interface (CLK, DIO)
- High-brightness LEDs for excellent visibility in varied lighting
- Compact, slim module ideal for tight enclosures and projects
- Easy integration with Arduino, Raspberry Pi and other MCUs
- Perfect for clocks, counters, voltmeters, thermometers and DIY builds
SKU: n/a
Reviews
There are no reviews yet