OLED 0.91 Inch Display Module

OLED 0.91 Inch Display Module — Compact Visual Performance

The OLED 0.91 inch display module brings crisp visuals to the smallest projects. With a 128 x 32 pixel resolution and white-on-black contrast, this mini OLED is perfect for wearables, handheld meters, smart sensors, and other space-constrained electronics that need a clear, low-power display.

Key Features

• High contrast visuals – deep blacks and bright white pixels for readable text and graphics in varied lighting.
• Energy-efficient OLED – low power consumption makes it ideal for battery-operated devices.
• Compact size – 0.91 inch diagonal and small PCB footprint for tight placements.
• I2C interface – requires only two data lines for simple wiring and fast integration.
• Wide compatibility – works with Arduino, Raspberry Pi, ESP32, STM32 and other common controllers.
• Monochrome output – crisp white on black suitable for text, numbers, icons and simple graphics.

Product Specifications

• Display Type: OLED (Organic Light-Emitting Diode)
• Size: 0.91 inch (diagonal)
• Resolution: 128 x 32 pixels
• Interface: I2C
• Operating Voltage: 3.3V to 5V
• Color: White on Black
• Dimensions: 38mm x 12mm x 1.4mm

Typical Use Cases

• Wearables – smart bands and fitness counters displaying steps, time and status.
• IoT projects – compact status displays on sensors and wireless nodes.
• Portable test equipment – handheld meters, counters and diagnostic tools.
• Medical devices – small indicators and portable monitors.
• Industrial tools – embedded diagnostics and local status readouts.

Getting Started (Arduino and Popular Boards)

1. Connect VCC to 3.3V or 5V and GND to ground.
2. Wire SDA and SCL to the I2C pins on your controller (Arduino Uno: A4/A5; Raspberry Pi: SDA/SCL pins).
3. Install a compatible library such as Adafruit SSD1306 or u8g2.
4. Load an example sketch to verify communication and adjust I2C address if required.
5. Customize fonts, icons and simple graphics to suit your interface.

Compatibility and Integration

This module is compatible with a wide range of microcontrollers and single-board computers. Use standard I2C libraries and drivers to draw text, shapes and bitmaps. Typical projects benefit from the module’s low power draw and readable monochrome output.

Common Questions

Can I use this OLED with an Arduino Uno?

Yes. The module uses I2C and works with libraries like Adafruit SSD1306 and u8g2 for quick setup.

Is an OLED better than an LCD for small displays?

For low-power, high-contrast, and readability in compact spaces, OLED is generally superior to traditional LCDs because it does not require a backlight and offers deeper blacks.

Does the display support graphics?

Yes. You can display text, icons, simple animations and bitmaps using standard graphics libraries compatible with the SSD1306 controller family.

Why Choose This OLED 0.91 Inch Display

• Small footprint and high pixel density make it ideal for modern compact electronics.
• Low power consumption keeps battery life longer in wearable and portable projects.
• Simple I2C wiring and broad library support speed up development.
• Manufactured and tested components for reliable performance.

Buy from Colgroad

Order your OLED 0.91 inch display module today from Colgroad for fast delivery in Islamabad and across Pakistan. Our components are tested, packed carefully and supported by technical staff who know embedded electronics.