Student Corner
-
Sensor And Modules, Students Corner
USB To RS485/422 Converter
Specifications
Compatibility: USB v2.0 standard
Interface: Network:USB
Serial:RS-485/RS-422
Port: One Independent RS-485 or RS-422 ports
Connector: Network: USB-type A connector
Serial: Screw terminal
Transmission speed: 600bps to 115.2Kbps
Parity bit: odd, even, none
Data bit: 5, 6, 7, 8
Stop bit: 1, 1.5, 2
Driver Support: Windows 2000/2003/XP/Vista/7 (32bit and 64bit)
Power Consumption: 1.5W @ 5V
Max. Distance: 4000ft (1200m) @ 19.2Kbps
Case: Blue transparent ABS
Operating Temperature: -20°~+65°
Operating Humidity: 20% to 95% (non-condensing)Overview
USB To RS485/422 converter allows PC users to connect their RS-485/422 devices
To systems that use USB interface. By attaching the converter to a PC, it will no longer be
Necessary to open the chassis or turn off the PC to install the hub. With the converter,
The user instantly gets one extra high-speed RS-485 or RS-422 ports. In addition, since
The power is derived from the USB port, there are not any cumbersome power adapters.
This makes the converter especially suitable for PLCs, printers, POS system and industrial
Control devices.
Package Included:
1PCS * Industrial USB To RS485 Converter Upgrade Protection CH340 RS485 ConverterSKU: n/a -
Sensor And Modules, Students Corner
EMG Module
EMG Muscle Sensor Module V3.0 With Cable And Electrodes will measure the filtered and rectified electrical activity of a muscle; outputting 0-Vs Volts depending the amount of activity in the selected muscle, where Vs signifies the voltage of the power source. Power supply voltage: min. +-3.5V.
By detecting the electromyogram (EMG), measuring muscle activity has traditionally been used in medical research, however with shrinking but more powerful microcontrollers and integrated circuits advent EMG power Road and sensors can be used for various control systems.This Muscle Sensor v3 measures, filters, rectifies, and amplifies the electrical activity of a muscle and produces an analogue output signal that can easily be read by a microcontroller, enabling novel, muscle-controlled interfaces for your projects.
Specifications & Features of EMG Muscle Sensor Module V3.0:-
- Diameter of Electrode Pad: 52 mm
- Cable Length: 2 feet
- Weight: 30gm.
- Improved adjustable gain (more rugged)
- Onboard port for new cables Connects to the board straight out of the box
- Power Supply : Normally ±9V dual power supply, minimum voltage is ±3.5V
- Supported with Arduino, Breadboard mountable
Wiring Instructions:-- To use this sensor, the user must have three electrodes connected to the subject’s body.
- The reference electrode should be placed on an inactive section of the body, such as the bony portion of the elbow, shin or forearm. This electrode should be connected to the black or brown cable.
- The two other electrodes should be placed along the muscle selected to be measured. The second electrode should be placed along the mid-length of the muscle; this electrode should be connected to the red cable.
- The last electrode should be placed at the end of the muscle and connected to the blue cable.
- Finally, connect pin SIG to an analogue input pin of your microcontroller and the GND pin to the ground pin on your microcontroller.
Package Includes :-- 1 x EMG Sensor
- 1 x Professional EMG Cable
- 3 x Disposable Surface Electrode
* Product Images are shown for illustrative purposes only and may differ from actual product.
SKU: n/a -
Sensor And Modules, Students Corner
Ky-040 360 degree Rotary Encoder Module in Pakistan
A 360 Degree Rotary Encoder is a Bread Board Friendly extremely precise module that provides an indication of how much the knob has been rotated AND what direction it is rotating in. It is an incremental electro-mechanical device that converts the angular position or motion of a shaft or axle to digital code. The output of incremental encoders provides information about the motion of the shaft, which is typically further processed in processor / controllers into information such as speed, distance, and position. It’s a great device for stepper and servo motor control. You could also use it to control devices like digital potentiometers.
Specifications:
- Model: KY-040
- Working Voltage: 0-5V
- Resistance Value: 10K
- Type: Incremental Encoder
- Cycles/Revolution: 20
- Material: PCB + Brass
- Weight: 10g
- Size: 32 x 19 x 30mm
Package Include:
- 1 x Ky-040 360 degree Rotary Encoder Module
Best Online Shopping Website for Ky-040 360 degree Rotary Encoder Module Variable Potentiometer in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Boards and Programmer, Students Corner
Arduino CNC Shield V3 for Stepper Motor A4988 DRV8825
Description
Best Online Shopping website for arduino cnc shield v3 a4988 driver board. Here you get arduino cnc shield v3 a4988 driver board in reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Multan, Quetta , Faisalabad and all over Pakistan.
This expansion board as a driver expansion board can be used for engraving machines, 3D printers. It is a total of four slots, can drive four A4988 or DRV8825 stepper motor driver, 4-axis Arduino CNC Shield v3. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.Specifications:
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
- PWM Spindle and direction pins
- 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
Features
- Coolant enable
- Uses removable Pololu A4988 compatible stepper drivers. (A4988, DRV8825, and others) (Not Included)
- Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping )
- Compact design.
- Stepper Motors can be connected with 4 pin Molex connectors or soldered in place.
- Runs on 12-36V DC. (At the moment only the Pololu DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)
- Please note that this is an unassembled kit and needs soldering.
- * * * Jumpers color may vary depending on the available stock.
NOT INCLUDED:
- Arduino Uno
- 1-4 Pololu A4988 compatible stepper drivers
SKU: n/a -
Sensor And Modules, Students Corner
Original 0.96 inch OLED Display Module
Size: 0.96 inch
Control chip: SSD1306.
Resolution: 128*64.
Display area: 21.744*10.864 (mm)
Physical size: 26.70*19.26*1.4 (mm)
Interface type: 8-bit 68XX/80XX Parallel,3-/4wire SPI,IIC interface.
Pin number: 30 Pin.
Display color: white/blue/yellow and blue.
Pixel point size: 0.154*0.154 (mm)
Working temperature: -40 ~ 85 degrees.
Working voltage: 3.3V.SKU: n/a -
Motor and Robotics, Students Corner
Stepper Motor Driver TB6600
TB6600 Arduino Stepper Motor Driver is an easy-to-use professional stepper motor driver, which could control a two-phase stepping motor. It is compatible with Arduino and other microcontrollers that can output a 5V digital pulse signal. TB6600 Arduino stepper motor driver has a wide range of power input, 9~42VDC power supply. And it is able to output 4A peak current, which is enough for the most of stepper motors.
The stepper driver supports speed and direction control. You can set its micro-step and output current with 6 DIP switch. There are 7 kinds of micro-steps (1, 2 / A, 2 / B, 4, 8, 16, 32) and 8 kinds of current control (0.5A, 1A, 1.5A, 2A, 2.5A, 2.8A, 3.0A, 3.5A) in all. And all signal terminals adopt high-speed optocoupler isolation, enhancing its anti-high-frequency interference ability.
As a professional device, it is able to drive 57, 42-type two-phase, four-phase, hybrid stepper motor.Note: this is an upgrade version of TB6600 Stepper Motor Driver.
Features:
- 9V-42V DC power supply.
- Output current: 0.5A-4.0A.
- Drive mode: Dual constant current PWM drive output.
- Strong anti-interference ability.
- Low vibration, low noise.
- Insulation resistance: >500MΩ at normal temperature and pressure.
- Insulation strength: 500V/min at normal temperature and pressure.
- With overheating, overcurrent, under-voltage lockout, input voltage anti-reverse protection, and other functions.
- Can drive 4-wire, 6-wire, 8-wire stepper motors.
Environmental Requirments:
- Cooling method: natural cooling or forced air cooling.
- Storage temperature: -20°C-65° C.
- Ambient humidity: <80% RH, no condensation, no frost.
- Vibration: maximum not exceeding 5.7m/S2.
- Use occasions: Avoid dust, oil and corrosive gases, and prohibit flammable gases and conductive dust.
Wiring Requirments:
- The pulse and direction signal lines and the motor and power lines are not allowed to be side by side, preferably separated by at least 10 cm.
- If one power supply is used for multiple drives, parallel connections should be made at the power supply. It is not allowed to go to one another and then to another chain connection.
- Do not plug or unplug the drive power terminal when the power is on. When the powered motor stops, there is still a large current flowing through the coil. Pulling the power terminal will burn the driver.
- It is strictly forbidden to access terminal after wire head plus tin, otherwise, the terminal may be overheated and damaged due to the contact resistance becomes larger.
- The wiring heads should not be exposed outside the terminals to prevent accidental short circuits and damage the drive.
Package Includes:
- 1 x TB6600 Stepper Motor Driver in Pakistan
SKU: n/a -
Electronic Components, Students Corner
LM7818 7818 Voltage Regulator
LM7818 L7818 7818 Voltage-Regulator IC is a 3 terminal positive regulator . this regulator has several fixed output voltage. This feature makes it more useful in a wide range of applications. This IC provide local on-card regulation. It reduces the distribution problems which is associated with single point regulation. It provides internal current limitation, thermal shut-down and safe area protection.It make it essentially indestructible. If heat sinking is provided , IC delivered over 1A output current. It provides fixed voltage regulators.This IC provide local on-card regulation. It reduces the distribution problems which is associated with single point regulation. It provides internal current limitation, thermal shut-down and safe area protection.
LM7818 Voltage Regulator Specifications:
- Output Type: Fixed
- Output Voltage: +18V dC
- Current Output: up to 1A
- Input Voltage: 20 – 40VDC?
- Quiescent (standby) current: 8mA
- Dropout Voltage (Max): 2 V @ 1A
- Polarity: Positive
- Operating Temperature: 0 to +125°C
- Mounting Style: Through Hole
- Pin Spacing Pitch: 2.54mm
- Hole Diameter: 3.8mm
- Dimensions: 10.4 x 4.6 x 9.15mm
LM7818 Voltage Regulator Features:
- output current is Up to 1.5A
- it provide Thermal overload protection
- It also provide Short-circuit protection
- It gives Output transition SOA protection
- It has 2% Output voltage tolerance
- Guaranteed in extended temperature range
- It is used in Power Management
- It gives Output transition SOA protection
- It gives Output transition SOA protection
LM7818 Voltage Regulator Circuit:
Package Include:
- 1 x LM7818 7818 Voltage Regulator
Best Online Shopping Website for LM7818 7818 Voltage Regulator 18V Voltage Regulator in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Boards and Programmer, Students Corner
Alligator Test Clips
Features:
1. 100% brand new and high quality.
2. Durable, safe and easy to use.
3. Can be used in electrical or laboratory electric testing work.
4. Frequently used in school physics laboratories to quickly and cheaply assemble circuits. Useful for connecting components to wires.
5. Easy for installation and safe for use with the insulation plastic boots covered.
Specification:
Model : P1041
Material: Wire & Conductive Metal
Color: Red, Black
Current: 15A
Suitable For: Testing
Weight: Approx. 65g / 2.3oz
Total Length: Approx. 103cm / 40.6in
Lead Diameter: 0.5cm / 0.2in
Lead Length: Approx. 1.8cm / 0.7in
Package list:
2 * Testing Cables(red and black)
Feedback From Buyers:
SKU: n/a -
IoT and Wireless Communation, Students Corner
CH340 USB to ESP8266 ESP01 Programmer
This CH340 USB to ESP8266 ESP01 module is just a USB to serial module. It is only responsible for converting the USB interface to fit the ESP8266 serial module. Knowledge of all aspects of the relevant information of the WiFi module refer to the ESP8266 usage!CH340 USB to ESP8266 Use:
The main objective is to facilitate this ESP8266 transition card connected to the computer through the serial port.
CH340 USB to ESP8266 Programmer Features:
- High speed CPU frequency and can be used as a serial port WIFI.
- The main purpose is to connect ESP8266 and computer PC via serial port.
- Using CH340 Serial Chip: more stable performance, powerful compatibility, support all Windows system.
- Perfect Companion for ESP8266: a USB-to-serial module that converts the USB interface to a serial port suitable for ESP8266.
- Little Tip: you need to solder a pushbutton across the ground and GPIO0 pin. Only need to hold the button for a few second as you plug it into a USB port then you can let go and the ESP is in program mode.
- For more information on this device you can google “All in one ESP-01 to USB converter” The first result is a page on the esp8266 wiki with great information. They have details on getting into programming mode, and links for the CH340 drivers if you need them.
-
Package Include:
- 1 x CH340 USB to ESP8266 ESP01 Programmer
Best Online Shopping Website for CH340 USB to ESP8266 ESP01 Programmer in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
SKU: n/a -
Sensor And Modules, Students Corner
DC-DC Boost 3A
IN + input positive IN- input negative!
OUT + output positive OUT-output negative
Input voltage range: DC 3.2V to 40V (The input voltage must be higher than the output voltage by more than 1.5V. Cannot boost)
Output voltage range: DC 1.25V to 35V voltage is continuously adjustable, high efficiency (maximum 92%) maximum output current is 3A.
Measured 12V input, 5V output current 1A load regulation rate is less than 1%
Note: This is a buck module, the input voltage must be higher than the output voltage.
If the output current is greater than 2.5A (or the output power is greater than 10W), please work with a heat sink for a long time.SKU: n/a -
Accessories, Students Corner
Transparent Case for Arduino UNO R3 in Pakistan
Transparent Acrylic Case Shell Enclosure Gloss Box For Arduino Uno R3 is of high-grade acrylic, which provides excellent protection. This is a unique design and provides easy connection to other components. The dimension of enclosure box is the same as original Arduino Uno R3.
Specifications and Features:
- Weight: 53 gm.
-
Material: A grade acrylic sheet.
- Simply Clicks Together Enclosure.
- Dimensions : 79.5 x 64.5 x 21 mm.
- This case provides easy access to all ports.
- For Arduino UNO R3 Development Board only.
-
With screw copper pillar and installation instructions.
- It requires no tools for easy assembly and disassembly.
- To protect your little computer against damages, dust and scratches Clear Top and Bottom.
Package Include:
- 1 x Transparent Case for Arduino UNO R3
Best Online Shopping Website for Transparent Case for Arduino UNO R3 Acrylic Enclosure Shell for Arduino in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
HTC-1 Digital Thermometer Hygrometer
1. Temperature, humidity, date, clock, same screen2.12 / 24 hour clock3. Daily alarm clock and hour report function4. Temperature display ° C / ° C. Maximum and minimum temperature and humidity memory5 light function6. Temperature measurement range: 0 ~ 50 ℃ (-32 ~ 122 ℉)7. Temperature resolution display: 0.1 ℃ (0.2 ℉)8. Temperature measurement accuracy: ± 0.5 ℃ (0 ℃ ~ 50 ℃), others ± 1 ℃9. Humidity measurement range: 10% RH ~ 99% RHSKU: n/a -
Sensor And Modules, Students Corner
Luminosity / Infrared Light Sensor (TSL2561)
The TSL2561 is an optical-to-digital converter that converts light intensity into a digital signal output with a direct I2C connection or SMBus interface. Each device is connected to a bandwidth photodiode and an infrared responsive photodiode on a separate CMOS integrated circuit that has the ability to provide a near-optical response of a 20-bit dynamic range. Two integrated ADCs convert the photocurrent into a digital output that represents the measurement of the illumination of each channel. This digital output can be the input of a microprocessor.
The TSL2561 is a high-speed, low-power, wide-range, programmable and flexible configuration of light intensity digital conversion chips. The chip can be widely used in the monitoring of various types of displays, in order to make the display provide the best display brightness and reduce the power consumption of the power supply under variable lighting conditions. It can also be used for street lighting control and security lighting. Many occasions. The main features of the chip are as follows:1. The upper and lower thresholds of the light intensity of the programmable configuration permit, and an interrupt signal is given when the actual illuminance exceeds the threshold;
2. Digital output conforms to the standard SMBus (TSL2560) and I2C (TSL2561) bus protocols;
3. Analog gain and digital output time programmable control;
4. In low power mode, the power consumption is only 0.75 mW
5. Automatically suppress light fluctuations of 50 Hz/60 Hz.
SKU: n/a -
Sensor And Modules, Students Corner
MQ-5 LPG Gas Sensor Module
MQ-5 sensor introduction:The gas sensitive material used by the MQ-5 gas sensor is two tin oxide (SnO2) with low conductivity in clean air. When combustible gases exist in the environment of the sensor, the conductivity of the sensor increases with the increase of the concentration of combustible gas in the air. A simple circuit can be used to convert the change of electrical conductivity into an output signal corresponding to the concentration of the gas. The MQ-5 gas sensor has high sensitivity to butane, propane and methane, and can give a good consideration to methane and propane. This sensor can detect a variety of flammable gases, especially natural gas, and is a low cost sensor suitable for many applications.Electrical performance:Input voltage: DC5V power consumption (current): 150mADO output: TTL digits 0 and 1 (0.1 and 5V)AO output: 0.1-0.3V (relatively pollution-free), the maximum concentration voltage is about 4VSKU: n/a
ColgRoad Top Selling
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
25W Submersible Water Pump
Specifications:
Attention:
Package Include:
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12706 12VDC 6A Cooling Refrigeration Plate
A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying a dc power source to a tec, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Using this TEC TEC1-12706 Thermoelectric cooler or thermoelectric Peltier get ice cold in minutes or heat to boiling by simply reversing the polarity.TEC12706 Cooling refrigeration Plate used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler. Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts. These devices must be used in conjunction with a heat sink water block to avoid burned one side is cooling (Printed model number)and another side is heating (Printed no word) when working. Please radiating the heating side
Note:
Power on the device only with the proper heat-sink setup to avoid any burning/damage or malfunction of the device, use a fine heat sink (such as in CPU fans) with thermal paste, and power the device. Use a 12v dc power supply to power the tec1-12706. Use one aa battery for 10- 20 seconds to power on the device to find the hot /cold side
Features Of TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt 50-60 Watt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
Features Of TEC1-12705 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Important Note!! Heat side requires heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy.No fluorescent flickering.No hazard of mercury or lead entering the environment.Low power consumption, high intensity, low lumen attenuation.Recessed mounted, maintenance free, easy installation.Solid- state, high shock/ vibration resistant.Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Lumens |
4800 lm |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Surface Treatment |
Oxidation Treatment, Silver Treatment |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Power Factor |
0.90 |
Power Efficiency |
85% |
Features:
Package Include:
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
Features:
Package Include:
120W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95120 |
|
Power |
|
120w |
|
Light source |
|
624 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1200lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
630*270*90mm |
|
Battery |
|
3.2V 18AH |
|
Solar Panel Power |
|
6V 18W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
12V Car Washer Pump
Specifications:
Package Include:
12V 8W Shafi Solar Water Pump in Pakistan
DC 12V Solar Water Pump Specifications:
DC 12V Solar Water Pump Features:
Package Include:
Best Online Shopping Website for 12V Solar Water Pump in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
IP66 100W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 100W |
|
Model |
ZL-TGD-100W |
Power |
100W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 100W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95060 |
|
Power |
|
60w |
|
Light source |
|
300 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
800lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
530*240*90mm |
|
Battery |
|
3.2V 12AH |
|
Solar Panel Power |
|
6V 12W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95180 |
|
Power |
|
180w |
|
Light source |
|
900 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1700lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
760*290*90mm |
|
|
Battery |
|
3.2V 24AH |
|
Solar Panel Power |
|
6V 24W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
RGB Remote Control Led Strip Light
Light up hallways, stairs, trails, windows of your home. It is applicable for automobile & Airplane model decoration, contour lighting or border. It comes with amazing features of 12 feet length and up to 300 LED quantity.
Specifications:
Features:
Applications:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation:
Package Include:
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.