Student Corner
-
Sensor And Modules, Students Corner
Heart Beat/Pulse Sensor
Pulsesensor pulse heart rate sensor for Arduino open source hardware development pulse sensor
Brief introduction:
Pulse sensor Arduino is used to test the heart rate sensor, students, artists, athletes, creator, game developer, or mobile terminal can develop interactive work related to heart rate.Sensors can be put on the finger or earlobe, through interconnected line can be connected to the Arduino.It also has an open source app, can real time your heart rate graph display.Essence is a integrated optical amplifying circuit and noise eliminating circuit heart rate sensor.Data Sheet:
- Power supply: 3-5 v
- Diameter: 16MM
- Magnification: 330
- LED wavelength: 609 nm
SKU: n/a -
Accessories, Students Corner
2.54mm, 2×20 Pin, Male Dual Header Pin for Raspberry Pi Zero GPIO in Pakistan
Accessories, Students Corner2.54mm, 2×20 Pin, Male Dual Header Pin for Raspberry Pi Zero GPIO in Pakistan
Specifications:
- Pitch: 2.54mm
- Type: Double Row
- Material: Gold Plated
- Pin: Straight Leg
Package Include:
- 1 x 2.54mm, 2×20 Pin, Male Dual Header Pin
Note:
Please Allow 1-3mm error due to manual measurement
Best Online Shopping Website for 2.54mm, 2×20 Pin, Male Dual Header Pin Male header in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Electronic Components, Students Corner
LM2576T and HVT
LM2576 Regulator features and specifications
- Switch mode step down voltage regulator
- Output Voltage for fixed voltage regulator: 3.3V, 5V, 12V or 15V
- Output Voltage for Variable type regulator: 1.23V to 37V
- Output Current: Upto 3A
- Maximum Input Voltage: 40V
- In-built Thermal Shutdown and Current Limit Protection
- Internal Oscillator: 52-kHz (Fixed Frequency)
- Available in TO-220 and TO-263 packages
SKU: n/a -
Sensor And Modules, Students Corner
RDM 6300 RFID Reader Module
RDM6300 125KHz card mini-module is designed for reading code from 125KHz card compatible read-only tags and
read/write card . It can be applied in office/home security, personal identification, access control, anti-forgery, interactive toy and production control systems etc.
RDM630 Series non contact RFID module, use the advanced RF receiving circuit and embedded MCU design, combing with high efficient decoding algorithm, to finish the data receive of EM4100 and all the compatible cards.
This is a very popular RFID card read module for arduino users, it can read 125K EM4100 series RFID card. This module is easy to use, serial port connect to arduino MCU after power up, when RFID car enter into card reading range, this module will send the card number to arduino by UART.
SKU: n/a -
Sensor And Modules, Students Corner
Thermocouple Temperature Probe K Type 500C
Thermocouple K Type Temperature Range 0-800C Sensor Probe
Type K (chromel – alumel) is the most common general purpose thermocouple with a sensitivity.
Specifications:
- Brand new and high quality.
- Type K Type.
- Temperature Range:0-600C
- Internal Insulation:Fibreglass.
- Thread Diameter:6mm / 0.23.
- External Shielding:Metal Shield.
- Total Length:1M / 39.
- Fork Terminal Spacing: 3.5mm / 0.13.
- Color: As Picture Shown.
Designed with two fork terminal, 6mm thread sensor for accurate measurement.
Works well with temperature controller(not included here), wide measurement range of 0-600C degreeSKU: n/a -
Accessories, Students Corner
Arduino UNO Acrylic Experimental Board Platform in Pakistan
- This is a acrylic fixed plate for Arduino UNO R3 development board, a 8cm x 5cm-400 hole breadboard and UNO R3 board can be installed on the plate, fixed by 6 nylon columns, experiment conveniently.
- Material: Acrylic plate
- Simple relocation or location of the project.
- Simply connect development board with the solder field.
Package Include:
- 4 x Rubber ear plugs
- 1 x Acrylic development platform for Arduino UNO
- 1 x linked material (plastic) for mounting the Arduino UNO
Note: Delivery does not include Arduino UNO and not the solder field.
Best Online Shopping Website for Acrylic development platform for Arduino UNO in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
SKU: n/a -
Sensor And Modules, Students Corner
SIM900A Sim900 Mini V4.0 Wireless Data Transmission Module GSM/GPRS Board Kit
Sensor And Modules, Students CornerSIM900A Sim900 Mini V4.0 Wireless Data Transmission Module GSM/GPRS Board Kit
Features:The onboard two set power supply interface VCC5 5V power supply, VCC4 interface, 3.5–4.5V power supply, optional power on self starting (default) and control start.The onboard SMA (default) and IPXmini antenna interface, SIM900A interface reserved reset.The size of the module is 49*50, all the new and original device.The computer can give early computer debugging USB module power supply, a very large amount of data under the condition of the recommended current more than 1A. Standby dozens of MA data can be set to provide dormancy, dormancy of 10MA low power. Support 2, mobile phone 3,4G card.The serial port circuit: support for 3.3V single chip microcomputer. TTL serial port support3.3 and 5V single chip microcomputer.The SIM card circuit to increase the SMF05C ESD chip.Antenna circuit: guarantee short and straight, so as to ensure the signal strength.PCB display screen printing mark: each interface, convenient development two times, the SIM900/A hardware is completely follow the design when the design manual.Two power supply interface: VCC5, 5V DC above 1A. Computer 5V power supply can be early computer USB. DC long data circuit over larger recommended 5V1A. VCC4, 3.5–4.5V power supply, ibid., suitable for lithium battery.Control pin all leads.A TTL level, compatible with 3.3V and 5V.The two antenna interface, the default SMA straight head, connector for IPXmini antenna.One way of speech interface, the way Mike interface.The control interface of each pin description:GND – GNDSIMR SIM900A RXD, TTL level, can not be directly connected to the 232 levelSIMT SIM900A TXD, TTL level, can not be directly connected to the 232 levelRST -SIM900A reset, active lowVCC_MCU when the SIM900A module and 5V TTL level communication, this pin is connected to DC 5V; when the level of communication of SIM900A and 3.3V TTL, this pin is connected to DC 3.3V.VCC5 —-DC 5V input.VCC4——DC3.5–4.5 inputOnboard Resources:Serial port circuit(with protection)Antenna interface circuit(SMA bend female port)Yes card circuit (flip SIM slot)4*3.5 fixture hole 4pcsSIM900A serial port terminal outputSpecifications:Size: 49mm x 47mmNet Weight:28gWeight: 38gPackage Included:1X Sim900A V4.0 Kit1x Power Cable1x AntennaSKU: n/a -
Electronic Components, Students Corner
LM317 Adjustable Voltage Regulator
In case the circuit needs a regulator for some non-standard voltage, then an excellent solution is to use the popular LM317T integrated regulator with characteristics:
- capable of operating in a range of output voltages from 1.2 to 37 V;
- the output current can reach 1.5 A;
- the maximum power dissipation is 20 W;
- built-in current limitation, for short-circuit protection;
- built-in overheat protection.
SKU: n/a -
Boards and Programmer, Students Corner
Flight Controller Board
The next evolution of the rotor revolution is here!! The KK2.1.5 is packing new found power with updated sensors, memory and header pins.
The KK2.1.5 is next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1.5 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1.5 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.
Specs:
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S(Custom Mix via the “Mixer Editor” option)
The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.What is a Multi-Rotor Control board you ask?
The HobbyKing KK2.1.5 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.
The HobbyKing KK2.1.5 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).SKU: n/a -
RC Drones and Accessories, Students Corner
Pixhawk PX4 flight controller (Simple kit)
Pixhawk PX4 autopilot PIX 2.4.8 32-bit flight controller
Features:
A new generation of 32-bit flight processors with strong incoming control, integrated PX4FMU + PX4IO on a single board
1. The advanced 32-bit ARM CortexM4 processor of high performance, can run NuttX RTOS real-time operating system;
2 14 PWM / servo output;
3 Bus interface (UART I2C SPI can);
4. Integrated backup power and backup controller fail, main controller fail backup control is safe;
5. Provide automatic and manual modes;
6. Provide redundant and failover power input;
7. Multi-color LED lights;
8. Multi-tone buzzer interface
9. Micro SD flight data recording;
Specifications:
Microprocessor
1.32 2MB flash STM32F427 Cortex M4, with processing unit floating point hardware
2 Frequency: 168 MHZ 256K RAM
3,32 STM32F103 Coprocessor
sensor
1. 3 – axis gyroscope digital L3GD20 16
2. Accelerometer 3-axis LSM303D 14 / magnetometer
3. MPU6000 6-axis accelerometer / magnetometer
4. MS5611 precision barometer
Interface
1. 5 High voltage compatible UART 1, 2 with hardware flow control
2 2
3. Spektrum DSM / DSM2 satellite receiver / DSM-X compatible input
4. Futaba SBUS compatible inputs and outputs
5. PPM signal
input 6. RSSI input (PWM or voltage)
7 I2C
8 SPI
VADC input 9.3.3 and 6.6
10. External MICRO USB interface
Packing list:
- Pixhawk 2.4.8 32bit Arm Flight Controllerx 1
- Original Housing x 1
- Security buttonx 1
- Doorbell x 1
- TF card (firmware IO has written) x1
- A 6pin 6pin cable x 1
- 4pin to 4pin cable x 1
- 3pin DuPont line x1
SKU: n/a -
Sensor And Modules, Students Corner
Raspberry Pi 8MP NoIR Camera Module V2 with Cable in Pakistan
The Raspberry Pi NoIR Camera V2 is the “night vision” version of the official camera board released by the Raspberry Pi Foundation. The Raspberry Pi NoIR Camera Board V2 has no Infrared filter, which makes it perfect for taking Infrared photographs or photographing objects in low light (twilight) conditions! Custom designed and manufactured by the Raspberry Pi Foundation in the UK, the Raspberry Pi NoIR Camera Board V2 features an ultra-high quality 8 megapixel Sony IMX219 image sensor (up from 5MP on the V1 camera board), and a fixed focus camera lens. The V2 camera module is capable of 3280 x 2464 pixel static images, and also supports 1080p30, 720p60 and 640x480p90 video.The module attaches to Raspberry Pi by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras. The CSI bus is capable of extremely high data rates, and it exclusively carries pixel data to the BCM2835 processor.The board itself is tiny, at around 25mm x 23mm x 9mm, and weighs just over 3g, making it perfect for mobile or other applications where size and weight are important.Raspberry Pi NoIR Camera Board V2 Features:-
- No IR Filter – Great for Low Light Conditions
- Includes Blue Filter
- Fixed focus lens on-board
- 150mm CSI camera cable included
- 8 megapixel native resolution sensor-capable of 3280 x 2464 pixel static images
- Supports 1080p30, 720p60 and 640x480p90 video
- Size 25mm x 23mm x 9mm
- Weight just over 3g
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- NoIR Camera v2 is supported in the latest version of Raspbian, Raspberry Pi’s preferred operating system
Package Include:-
- 1 x Raspberry Pi 8MP NoIR Camera Module V2 with Cable
Best Online Shopping Website for Raspberry Pi 8MP NoIR Camera Module V2 with Cable High Quality Camera in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
ESPLORA Joystick Game Program Module Atmega32u4
It’s designed for people who want to get up and running with Arduino without having to learn about the electronics first. For a step-by-step introduction to the Esplora; check out the Getting Started with Esplora guide.
The ESPLORA Joystick Photosensitive Sensor Board has onboard sound and light outputs, and several input sensors. It also has the potential to expand its capabilities with two Tinker-kit input and output connectors, and a socket for a color TFT LCD screen.
Like the Leonardo board, the ESPLORA Joystick Photosensitive Sensor Board uses an Atmega32U4 AVR microcontroller with 16 MHz crystal oscillator. And a micro USB connection capable of acting as a USB client device like a mouse or a keyboard. In the upper left corner of the board, there is a reset push button, that you can use to restart the board.
The Esplora can emulate a mouse or keyboard, allowing you to create your own controller for musical software, 3Dmodeling tools, or even a word processor. It actually comes pre-programmed with a game controller script, so you can plug it into your computer and start playing as soon as you open the box.
More information on arduino.cc/esplora.
The Esplora combine the Arduino processor with a range of sensor and actuators:
- light sensor
- temperature sensor
- 3-axis accelerometer
- joystick
- set of push button
- slider
- RGB led
- buzzer
Schematic & Reference Design
EAGLE files: Attach:arduino-esplora-reference-design.zip
Schematic: Attach:arduino-esplora-schematic.pdfVisit the Esplora library reference page to see the complete documentation of the library and examples.
SKU: n/a -
Sensor And Modules, Students Corner
8 Channel Relay Module Board For Arduino
- 5V 8-Channel Relay interface board and each one needs 15-20mA Driver Current
- Equipped with high-current relay, AC250V 10A ; DC30V 10A
- Standard interface that can be controlled directly by microcontroller (Arduino, 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)
- Indication LED’s for Relay output status
SKU: n/a -
Sensor And Modules, Students Corner
RFID Sensor
Description:
PN5180 module NFC RF I sensor support ISO15693 RFID high frequency IC card ICODE2 read and write
PN5180 Module Introduction:
PN5180 can support more cards with different protocols (ISO / IEC 18092.14443 A / B, FeliCa, 15693),
Increasing the DPS function increases the stability of the reception, (more likely to be EMV, improve antenna feedback).
PN5180 supports card emulation and PEER TOpeer mode, NFC chip.
Module using the application of more serial peripheral interface SPI
Overview:
PN5180 is a multi-protocol NFC front end with high output power, dynamic power control (DPC), adaptive waveform control (AWC) and adaptive receiver control (ARC) and multiple power saving features, even in harsh conditions, Efficient, stable and reliable operation.
PN5180 for POS terminals, with a new generation of mobile phones to support NFC to achieve the largest interoperability. High-performance NFC front end to meet the radio frequency EMV standards.
characteristic:
Dynamic power control (DPC), even in the case of antenna imbalance can also optimize the RF performance
Adaptive Waveform Control (AWC) automatically adjusts the transmitter to fit the RF standard
Adaptive Receiver Control (ARC) automatically adjusts the receiver parameters to achieve consistent reliable communication
Automatic EMD processing without host interaction relaxes the timing requirements on the host controller
Key Benefits:
High RF output power
Compliance with all standards related to NFC, contactless operation and EMVCo
Active Load Demodulation Supports more compact antennas for card emulation mode
Target application
Pay
Physical access control
E-government
industrial control
Package:
1*PN5180 Reader&Writer ModuleSKU: n/a
ColgRoad Top Selling
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy.No fluorescent flickering.No hazard of mercury or lead entering the environment.Low power consumption, high intensity, low lumen attenuation.Recessed mounted, maintenance free, easy installation.Solid- state, high shock/ vibration resistant.Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Lumens |
4800 lm |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Surface Treatment |
Oxidation Treatment, Silver Treatment |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Power Factor |
0.90 |
Power Efficiency |
85% |
Features:
Package Include:
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
12V 8W Shafi Solar Water Pump in Pakistan
DC 12V Solar Water Pump Specifications:
DC 12V Solar Water Pump Features:
Package Include:
Best Online Shopping Website for 12V Solar Water Pump in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95180 |
|
Power |
|
180w |
|
Light source |
|
900 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
1700lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
760*290*90mm |
|
|
Battery |
|
3.2V 24AH |
|
Solar Panel Power |
|
6V 24W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
LED Bulb Raw Material
Specifications:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 30W |
|
Model |
ZL-TGD-30W |
Power |
30W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 30W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
5M 12V LED Strip NEON Flexible Lights in Pakistan
12V Neon Flexible Strip Light IP65 Rating Size 16*12 5M Length Lamp Material Silica Gel
12V Neon Flexible Strip Lights Specifications:
12V Neon Flexible Strip Lights Features:
Package Include:
1 x 5M 12V LED Strip NEON Flexible Lights
Best Online Shopping Website for 5M 12V LED Strip NEON Flexible Lights Decoration Lights in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
Main Stem: Cast Iron
Voltage Input: DC12V
Weight: 8lbs
Inlet/ Outlet Port Fitting: 3/4
Rated Power:175w
Rate Current: 13A
Max Flow: 40L/minute
No-Load: 4500RPM
used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
Max Suction Distance:5m
Head:10m
Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
Base Size: 3-1/2″ X 4-1/4″
Power Corded 6ft Aprox
Features:
Package Include:
5V 2A Adapter
5V 2A Power Supply AC/DC Adapter is the best choice for your devices. 5V 2A Power Supply AC/DC Adapter allows portability of equipment powered either by mains or battery without the added bulk of internal power components, and makes it unnecessary to produce equipment for use only with a specified power source, the same device can be powered from 120 VAC or 230 VAC mains, vehicle or aircraft battery by using a different adapter. Another advantage of these designs can be increased safety, since the hazardous 120 or 240-volt mains power is transformed to a lower, safer voltage at the wall outlet and the appliance that is handled by the user is powered by this lower voltage.
Specifications:
Features:
Package Include:
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
Model |
|
LT95060 |
|
Power |
|
60w |
|
Light source |
|
300 patches 5730 lamp beads |
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
Luminous flux |
|
800lm |
|
Install Height |
|
5-6M |
|
Lamp Dimension |
|
530*240*90mm |
|
Battery |
|
3.2V 12AH |
|
Solar Panel Power |
|
6V 12W |
|
Finished Color |
Black |
||
Material |
Die-casting Aluminum |
||
Color rendering index |
Ra>80 |
||
Rated life |
50000h |
||
IP Rating |
IP65 |
||
Working temperature |
-20~+60°C |
||
Charging |
6-8h Hours |
||
Control system |
Light sense + human body induction + remote control |
||
Application |
Highway, courtyard, road, outdoor, etc. |
||
Battery Type |
LiFePO4 Battery |
Advantages:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 50W |
|
Model |
ZL-TGD-50W |
Power |
50W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 50W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
50W 5000LM Street Light
HZB
F1 Series LED street light, newest ultra-thin but good heat dissipation design,
simple structure, Streamline design, surface spray treatment, high temperature
resistance, good weather resistance; optimal integration.
Specifications:
Model |
HZB-LD-F1-50W |
||
Power |
50W |
||
Lumens |
5000lm±10% |
||
Size(mm)(LxWxH) |
398*139*50 |
||
Color Temp |
6500K |
||
Operation Temp |
-40°- 60°C |
||
Life Span |
50,000 hours for LED |
||
Driver |
High efficiency driver |
||
Voltage range |
AC110-240V |
||
Frequency |
50/60Hz |
||
Beam Angle |
120 degree |
||
CRI |
>70 |
||
PF |
≥0.90 |
||
Power Efficiency |
≥90% |
Features:
IP66.
Light.
Universal.
Wall or on the Pole.
can be as per your request.
High Quality Aluminum, Rapid Cooling.
Applications:
High ways.
Street, Bridge, Pavement.
Parking Garage, Parking Lot.
School, Residential, Park and Other Outdoor Places.
Package
Include:
RGB Remote Control Led Strip Light
Light up hallways, stairs, trails, windows of your home. It is applicable for automobile & Airplane model decoration, contour lighting or border. It comes with amazing features of 12 feet length and up to 300 LED quantity.
Specifications:
Features:
Applications:
Package Include:
CR2032 3V Coin Cell Battery in Pakistan
LiCB CR2032 or 2032 cell Lithium Coin batteries contain the substance manganese dioxide, which is chemically very stable. with high energy density and high voltage, a single 2032 Lithium Coin battery can replace two, three or more conventional batteries. If you’re looking for CR2032 batteries that are designed to provide reliable and long-lasting power, you’re at the right place.
For More Visit:
Specifications:
Features:
Applications:
Caution:
Package Include:
IP66 100W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
Optical Parameters of High power LED Floodlight 100W |
|
Model |
ZL-TGD-100W |
Power |
100W |
LED chip |
Epistar /Bridgelux LED chip |
Brightness |
90lm/W |
Color Temperature |
2700-6500k |
Warm White: 2700-3200k |
|
Neutral White/Nature white 4000-4500K |
|
Day White: 5000-5500K |
|
Cool White, Cold White > 6500K |
|
CRI |
>80 |
Beam Angle |
120 degree |
Physical parameters of LED floodlight 100W |
|
Housing Material |
Aluminum Alloy |
Protection Rating |
IP65 / IP66 |
Current |
320 mA |
Voltage |
AC 85-265V |
Frequency |
50/60 HZ |
LED driver |
Excellent isolated constant current driver |
Long Life |
50,000h only Led |
Power Efficiency |
85% |
Features:
Package Include:
RGB Strobe Light
LED Room Strobe 18 has high quality LED, small, light and compact.
It has a sound sensor, which works according to the musical beat and an
adjustment button between random mode or sound beat. Perfect for you who want
to give a professional touch to your party by turning any party into a
“PARTY”.
Specifications:
Power: 20W
Model: STB-18
Material: Plastic Cement
Colors: RGB
Frequency: 50 / 60Hz
Color (Product): Black
LED Quantity: 18 Leds
Weight (Product): 0.7kg
Cable Length (Built-in): 116cm
Modes: Automatic / Sound Sensor
Voltage: AC 110V ~ 220V (BIVOLT)
Dimensions (Product): 245 x 50 x 150 ( L x W x H )
Features:
Plastic Cement Material.
Beat Sensitivity Programmer.
Strobo Programmer (Random or Rhythmic).
Strobo with 18 high quality LEDs, small, light and compact.
Perfect for you who want to give a professional touch to your party by turning any party into a “PARTY”.
It has a sound sensor, which works according to the musical beat and an adjustment button between random mode or sound beat.
Note:
Please dont use it in Humid Environment.
Please do not look directly into the light in case it can hurt the eyes.
Package Include:
1 x RGB Strobe Light
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include:
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation: