- Boards, Modules and Accessories
N20 Mini DC Gear Motor (200/600/800 RPM) (Brand New)
– Compact N20 mini DC gear motor, brand new
– Available in 200, 600, and 800 RPM speed options
– High torque output optimized for small mechanisms
– Quiet, efficient operation for noise-sensitive builds
– Ideal for robotics, DIY projects, prototypes, and smart devices
– Durable construction with consistent, smooth performanceSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
Servo Motor SG90 (180 Degree Rotation)
- Small & lightweight — fits tight spaces and lightweight projects
- Precise 180° movement for accurate positioning
- PWM control compatible with Arduino & Raspberry Pi
- Runs on 4.8V–6V (batteries, USB, or adapters)
- Durable build with standard connectors and mounting holes
- Affordable choice for students, hobbyists and educators
SKU: n/a - Boards, Modules and Accessories, Accessories
20cm Male-to-Female Pin-to-Hole Jumper Wires 40pcs Set
– 40pcs male-to-female jumper wire set
– 20cm length for flexible connections
– Male pin to female socket for versatile interfacing
– Assorted colors for easy circuit identification
– Durable, insulated and reusable leads
– Compatible with Arduino, Raspberry Pi, ESP32 and moreSKU: n/a - Boards, Modules and Accessories, Accessories
400 Tie Points Half Sized Solderless Breadboard
– 400 tie points for small-to-medium circuits
– Half-size solderless breadboard ideal for beginners and prototyping
– Dual power rails for easy power distribution
– Nickel-plated contacts for secure, reliable connections
– Durable, heat-resistant ABS plastic housing
– Compatible with Arduino, Raspberry Pi, sensors; reusable and no soldering requiredSKU: n/a - Batteries, Cells and Power Supply, Boards, Modules and Accessories
2x 18650 Battery Case Cell Holder
- Holds two 18650 lithium-ion batteries side by side for compact battery packs.
- Spring-loaded contacts for secure, reliable electrical connection.
- No soldering required thanks to solder-free terminals and easy installation.
- Compact, lightweight design ideal for portable electronics and handheld projects.
- Durable ABS construction with mounting options for flexible installation.
- Versatile use in DIY, prototyping, consumer electronics, and emergency power solutions.
SKU: n/a - Boards, Modules and Accessories, Accessories
JST Female Connector Cable 150mm (2-Pin)
– Ready-to-use 2-pin JST female connector with 150mm pre-attached wires
– Standard 2.54mm pitch compatible with JST male connectors
– Flexible, high-quality copper conductors with durable insulation
– Secure, reliable power and signal connections for prototypes and projects
– Ideal for Arduino, sensors, LEDs, RC models, drones, and DIY electronics
– No soldering or crimping required; plug-and-play convenienceSKU: n/a - Boards, Modules and Accessories, Accessories
Ceramic Capacitors (Non-Polar)
- Non-polar design — works in AC and DC circuits without polarity concerns.
- High voltage rating for demanding power and industrial systems.
- Excellent high-frequency performance for RF and communication circuits.
- Temperature-stable ceramic dielectric for consistent operation across ranges.
- Durable, long-lasting construction suitable for industrial and consumer electronics.
- Compact SMD and thru-hole options for space-constrained PCB designs.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
I2C Module for LCD Display
– Connect 16×2 or 20×4 character LCDs using only four pins (VCC, GND, SDA, SCL)
– Reduces wiring and saves up to 6 GPIO pins compared to parallel LCD wiring
– Built-in PCF8574 I/O expander for stable I2C communication
– Adjustable contrast via onboard potentiometer and software-controlled backlight
– Compact, plug-and-play design that fits behind the LCD
– Compatible with Arduino, Raspberry Pi, ESP32 and major development boardsSKU: n/a - Boards, Modules and Accessories, Accessories
20cm Male-to-Male Pin-to-Pin Jumper Wires 40pcs Set
- 40pcs male-to-male jumper wire set for breadboard and header connections.
- Each wire measures 20cm for flexible routing and neat layouts.
- Male pins on both ends for easy pin-to-pin connections.
- Assorted colors to simplify wiring and debugging.
- Durable, flexible insulated construction for repeated use.
- Perfect for Arduino, Raspberry Pi, ESP32, prototyping and DIY projects.
SKU: n/a - Boards, Modules and Accessories
Hard Core Wire for Breadboard (1 Meter)
– Ideal for Arduino and microcontroller-based projects
– Color-coded solid-core jumper wire for neat, organized breadboard wiring
– 1 meter length gives flexibility for small to medium prototyping setups
– Durable, high-quality construction for reliable circuit testing and power delivery
– Great for beginners and professionals working on robotics, IoT, and DIY electronics
– Versatile use: breadboard prototyping, robotic arms, sensor connections, and IoT system buildsSKU: n/a - Boards, Modules and Accessories, Accessories
9V Battery Clip Connector
– Quick snap-on connector for 9V batteries
– Secure, stable power for Arduino and LED projects
– Durable construction for reliable long-term use
– Compact, lightweight design fits tight project spaces
– Flexible leads for easy connection to circuits and devicesSKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Uno R3 SMD Board with Free USB Cable
– Compact Arduino Uno R3 SMD board with ATmega328P SMD microcontroller
– Free USB Type B cable included for plug-and-play programming
– 14 digital I/O (6 PWM) and 6 analog inputs for sensors and actuators
– Stable 5V operation, supports 7–12V input via barrel jack or USB
– Full Arduino IDE support and compatibility with standard libraries
– Durable surface-mount design ideal for classrooms, kits, and projectsSKU: n/a - Boards, Modules and Accessories, Display Modules and LCDs
16×2 LCD Character Display Module (Green Backlight)
Boards, Modules and Accessories, Display Modules and LCDs16×2 LCD Character Display Module (Green Backlight)
- 16×2 character display — two lines with 16 characters per line for clear text output.
- HD44780 compatible controller for wide microcontroller support.
- Green LED backlight for improved visibility in low-light conditions.
- 4-bit and 8-bit parallel interfaces for flexible wiring and data transfer.
- Adjustable contrast and low power — built-in potentiometer and energy-efficient design.
- Custom characters & easy integration — create icons and connect quickly to Arduino, Raspberry Pi and other boards.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Relay Module (1-Channel)
- Compact 1-channel relay module with 5V DC control for microcontrollers.
- SPDT (NO/NC) relay supports up to 10A at 250V AC or 10A at 30V DC.
- Optocoupler isolation protects your Arduino, Raspberry Pi, or ESP board.
- Built-in LED indicator and screw terminals for easy wiring and status monitoring.
- Compact 52 x 26 x 18 mm PCB with mounting holes for tight enclosures.
- Ideal for home automation, DIY projects, industrial controls, and automotive applications.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Thermoelectric Cooler Peltier Module TEC1-12706
- Compact 40 x 40 x 3.6 mm Peltier cooling module
- Rated 12V DC, draws up to 6A for powerful cooling
- Delivers up to 60W cooling with a proper heatsink
- Solid-state ceramic construction for long life and moisture protection
- Cools one side while heating the opposite side for directional thermal control
- Ideal for DIY fridges, PC cooling, lab equipment, sensors, and portable chillers
SKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
Servo Motor SG90 (360 Degree Rotation)
- Compact servo with 360-degree continuous rotation for full directional control.
- Lightweight (approx. 9g) and small form factor for tight builds.
- Durable construction for reliable, long-lasting operation.
- Simple PWM control compatible with Arduino, Raspberry Pi and other microcontrollers.
- Low power consumption, runs on 4.8V to 6V—ideal for battery projects.
- Great for wheeled robots, pan-tilt systems, conveyors and DIY automation.
SKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Nano V3 Board (Solderless)
- Compact solderless Arduino Nano V3 for quick prototyping
- Powered by ATmega328P microcontroller for reliable performance
- 14 digital I/O pins and 8 analog inputs for flexible interfacing
- Mini USB port for easy programming and power
- Arduino IDE compatible and works with most shields and accessories
- Low power consumption ideal for battery-operated projects
SKU: n/a - Boards, Modules and Accessories, Accessories
Aluminum Water Cooling Block 40*40*12mm
- High-quality aluminum alloy construction for fast heat dissipation
- Compact dimensions: 40×40×12mm for tight spaces
- Dual water inlet and outlet ports for easy tubing connection
- Lightweight, corrosion-resistant design suitable for long-term use
- Ideal for CPUs, GPUs, lasers, 3D printers and other DIY cooling projects
SKU: n/a - Boards, Modules and Accessories
Li-Ion 3.7V 18650 EVE Battery Cell (2550mAh)
– High-performance Li-Ion 18650 EVE cell, 3.7V 2550mAh capacity
– Rechargeable cylindrical Li-ion battery ideal for high-drain devices
– Unprotected 18650 battery cell suitable for DIY battery packs and PCB builds
– Reliable power for flashlights, power banks, Arduino, robotics and embedded systems
– Compact cylindrical form factor designed for long life and stable current
– Trusted choice for engineers, students, and hobbyistsSKU: n/a - Boards, Modules and Accessories
44mm Rubber Wheel for N20 DC Gear Motor
– Precision 44mm rubber drive wheel designed for N20 DC gear motors
– High-traction rubber compound for improved grip on multiple surfaces
– Durable construction for repeated use in robotics and motorized toys
– Compact, lightweight design for smooth, efficient movement
– Easy to install and ideal as an upgrade or replacement part
– Perfect for DIY robotics, educational projects, and small automation buildsSKU: n/a
- Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road, Rawalpindi, Punjab, Pakistan
- 03320235000
- 99 products sold
- On College Road from 2025
- Owner: Sharafat Shahzad
