ZOP Power 3S 11.1V 3300mAh 25C LiPo Battery – Reliable Power for RC and FPV
The ZOP Power 3S 11.1V 3300mAh 25C LiPo Battery delivers a balance of high capacity, dependable current output, and compact size. Designed for hobbyists, FPV racers, drone pilots, and DIY electronics makers, this rechargeable lithium polymer pack supplies stable voltage and strong continuous current for a wide range of remote control and robotics applications.
Performance Highlights
- Nominal voltage: 11.1V (3S) for mid-voltage setups
- Capacity: 3300mAh (36.63Wh) for extended flight and run times
- Continuous discharge rate: 25C, providing strong sustained power delivery
- Maximum continuous current: 82.5A (3300mAh × 25C) for high-demand motors and electronics
- Connectors: XT60 power connector and JST-XH balance lead for common chargers and ESCs
Key Features
- High energy density LiPo chemistry for long runtimes in a compact package
- Lightweight and compact design ideal for drones, FPV rigs, RC planes, cars, and boats
- Robust construction supports an expected 300 to 500 recharge cycles when charged and stored properly
- Standard XT60 and JST-XH connectors for hassle-free installation and charging
- Stable voltage output under load for predictable ESC and motor performance
Technical Specifications
- Nominal Voltage: 11.1V (3S)
- Capacity: 3300mAh
- Energy: ~36.63Wh
- Discharge Rate: 25C continuous
- Maximum Discharge Current: 82.5A
- Connector Type: XT60 power plug
- Balance Connector: JST-XH
- Dimensions (approx): 135 mm × 42 mm × 26 mm
- Weight (approx): 230 g to 250 g
Recommended Applications
- RC drones and quadcopters, including many FPV racing builds
- RC airplanes and electric helicopters
- RC cars, trucks, and high-speed boats
- FPV racing systems and hobbyist DIY electronics
- Robotics projects and high-power embedded systems requiring compact energy packs
Why This Battery Works Well
- Balanced combination of capacity and discharge rate for longer run times without sacrificing performance
- 25C continuous rating delivers reliable current for most mid-power setups while keeping weight low
- XT60 connector offers secure power delivery; JST-XH balance lead ensures safe cell-by-cell charging
- Compact footprint fits into many popular airframes and vehicle battery bays
Charging, Storage and Safety Guidelines
- Always charge using a dedicated LiPo-compatible charger and select the correct cell count (3S) and charge rate
- Use the JST-XH balance connector every charge to keep cell voltages matched
- Never over-discharge below 3.0V per cell; most pilots set a safe cutoff around 3.3V per cell under load
- Store at approximately 3.8V to 3.9V per cell (storage charge) if not using the pack for more than a few days
- Inspect the pack for damage, swelling or punctures before each use; do not use damaged cells
- Follow local regulations for LiPo transport and disposal
Compatibility Tips
- Works with ESCs, motors and chargers that support 3S (11.1V) LiPo chemistry
- XT60 is widely used on medium and high-power RC platforms; consider adapter cables if your setup uses a different connector
- Match the discharge rating and capacity to your motor/ESC draw to avoid overheating or voltage sag
Note: Images are for Illustration Purposes Only.
There are no reviews yet.