-
Batteries, Cells and Power Supply, Boards, Modules and Accessories
LiPo Battery Charging Module 2A (TP5100)
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesLiPo Battery Charging Module 2A (TP5100)
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devicesSKU: n/a -
Batteries, Cells and Power Supply, Boards, Modules and Accessories
Power Bank Module for 18650 Cells Battery
Batteries, Cells and Power Supply, Boards, Modules and AccessoriesPower Bank Module for 18650 Cells Battery
- Build your own portable power bank using 18650 lithium-ion cells.
- Integrated LCD display for real-time battery charge and voltage readouts.
- Includes rechargeable 18650 module for immediate use.
- Built-in battery management system (BMS) for overcharge, over-discharge and short-circuit protection.
- USB output lets you charge smartphones, tablets and other USB devices.
- Compact, lightweight design ideal for DIY projects and outdoor use.
- Order now for fast delivery in Islamabad.
SKU: n/a -
Boards, Modules and Accessories
18650 Li-Ion Battery Pure Nickel Strip (1P) in 1 Meter Length
– 1 meter roll of 100% pure nickel strip, ideal for 18650 Li-Ion cells
– 0.15 mm thickness for optimal balance of flexibility and strength
– Designed for spot welding: low-resistance, reliable connections
– Corrosion-resistant and heat-tolerant for long-lasting battery packs
– Cuts cleanly with scissors or shears; perfect for DIY and professional buildsSKU: n/a
LiPo Battery Charging Module 2A (TP5100)
In stock
– Fast 2A charging current for rapid LiPo recharge
– Wide 5V to 18V DC input (USB, DC adapter, solar compatible)
– Supports single-cell 3.7V and dual-cell 7.4V LiPo batteries
– CC (Constant Current) and CV (Constant Voltage) charging modes with LED status
– Multi-layer protection: overcharge, over-discharge, short-circuit, thermal
– Compact, efficient design for easy integration into DIY projects and portable devices
₨ 180 ₨ 300
In stock
LiPo Battery Charging Module 2A (TP5100) – Product Overview
The LiPo Battery Charging Module 2A (TP5100) is a compact, high-efficiency charger designed specifically for lithium polymer batteries. Engineered for fast, safe charging, the TP5100 is ideal for hobbyists, makers, and product designers who need reliable charging for single-cell (3.7V) and dual-cell (7.4V) LiPo packs.
Key Benefits
- Fast charging up to 2A reduces downtime for battery-powered projects.
- Wide 5V to 18V input range supports USB sources, DC adapters, and solar panels.
- Integrated protections preserve battery life and prevent damage during charging.
- Small form factor allows seamless integration into portable electronics, drones, and DIY systems.
Features of the TP5100 LiPo Battery Charging Module
High-Performance Charging
The TP5100 module delivers up to 2A of charge current using a two-stage CC/CV charging algorithm. In Constant Current (CC) mode it supplies a steady charge current until the cell voltage reaches the target threshold; it then switches to Constant Voltage (CV) mode to top the battery off safely.
Wide Input Voltage Compatibility
Operate the module from a variety of power sources thanks to its 5V to 18V DC input range. This makes the TP5100 suitable for USB powerbanks, wall adapters, bench supplies, and small solar setups.
Battery Compatibility
- Single-cell LiPo: nominal 3.7V
- Dual-cell LiPo: nominal 7.4V
Comprehensive Protection Features
Safety is built in. The module includes:
- Overcharge protection to prevent battery damage when full
- Over-discharge protection to avoid deep discharge
- Short-circuit protection to protect both the battery and the module
- Thermal protection to reduce charge current or shut down if temperatures rise
Status Indicators
Simple LED feedback shows charging and fully charged states, making it easy to monitor progress at a glance during development or field use.
Technical Specifications
- Model: TP5100 LiPo Battery Charging Module
- Maximum Charging Current: 2A
- Input Voltage: 5V to 18V DC
- Battery Compatibility: Single-cell (3.7V) and Dual-cell (7.4V) LiPo
- Charging Modes: Constant Current (CC) and Constant Voltage (CV)
- Protections: Overcharge, Over-discharge, Short-circuit, Thermal
- Status Indicators: LEDs (charging / fully charged)
- Form Factor: Compact PCB module for easy integration
Applications
- DIY electronics and maker projects
- Portable and wearable devices
- Drones, RC vehicles, and hobby electronics
- Solar-powered battery charging systems
- Battery-powered prototypes and embedded systems
Installation and Usage Tips
- Verify battery cell count and wiring before connecting to avoid incorrect voltage selection.
- Use an appropriate power source within the 5V to 18V range to ensure stable charging.
- Monitor initial charges to confirm LED indications and expected charging behavior.
- Ensure adequate ventilation if charging at high current to help manage heat.
- For long-term installations, consider adding a fuse or PTC for additional safety.
Why Choose the TP5100 LiPo Battery Charging Module
The TP5100 combines fast 2A charging performance with robust safety features and flexible input compatibility. Its compact size and high efficiency make it a top choice for anyone needing a reliable LiPo charging solution in compact or portable projects.
Note: Images are for illustration purposes only.
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 4.83 rating from 572 reviews
-
Boards, Modules and Accessories, Accessories
JST Male Connector 2.54mm (3-Pin) (Straight / Right Angle)
Boards, Modules and Accessories, AccessoriesJST Male Connector 2.54mm (3-Pin) (Straight / Right Angle)
– Compact JST male connector with 2.54mm pitch and 3-pin configuration
– Available in straight and right-angle PCB mounting styles
– Corrosion-resistant metal contacts and durable plastic housing
– Secure, stable connections for power, ground and signal lines
– Ideal for Arduino, robotics, RC models, sensors and prototyping
– Package includes 1 × JST Male Connector 2.54mm (3-Pin)SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
HC-SR04 Ultrasonic Distance Sensor Module
– Accurate non-contact distance measurement from 2 cm to 400 cm
– High precision with up to 3 mm resolution
– Uses 40 kHz ultrasonic waves for reliable detection
– Easy 4-pin interface (VCC, Trig, Echo, GND); Arduino and Raspberry Pi compatible
– Fast response time (<10 ms) and low power consumption (15 mA)
– Compact, lightweight, and cost-effective for robotics, automation, and DIY projectsSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
41mm Piezoelectric Ceramic Brass Disc (XHXDZ-41MM)
Boards, Modules and Accessories, Sensors And Modules41mm Piezoelectric Ceramic Brass Disc (XHXDZ-41MM)
- 41mm piezoelectric ceramic disc with brass backing
- Brass plate bonded to a piezoelectric ceramic layer for strong vibration
- Converts electrical signals (AC or pulsed DC) into audible and ultrasonic sound
- Larger diameter for higher sound output and stronger vibrations
- Lightweight, low-power design ideal for buzzers, transducers, and sensors
- Perfect for DIY electronics, Arduino projects, and experimental applications
SKU: n/a -
Integrated Circuits (ICs)
CD4511 BCD to 7-Segment Decoder/Driver IC (DIP)
– Converts 4-bit BCD input into 7-segment outputs for LED displays
– CMOS design with low power consumption and wide supply range (3V to 15V)
– Includes LE (Latch Enable), LT (Lamp Test), and BI (Blanking Input) control pins
– Directly drives common cathode 7-segment LED displays without extra drivers
– Available in easy-to-use DIP-16 package for breadboard and PCB integration
– Ideal for clocks, counters, calculators, and other numeric display systemsSKU: n/a -
Sensors And Modules
E18-D80NK IR Obstacle Avoidance Proximity Sensor
- Adjustable detection range from 3cm to 80cm with built-in potentiometer
- Modulated infrared technology reduces ambient light interference for reliable detection
- Digital output signal (HIGH/LOW) for easy microcontroller integration
- Fast response time under 2ms with low power consumption under 25mA
- NPN Normally Open output supporting up to 100mA current
- Compact cylindrical design with LED indicator for real-time detection status
- Works with Arduino, ESP32, Raspberry Pi, and PLC systems for robotics and automation
SKU: n/a -
Display Modules and LCDs
Digital Thermometer & Hygrometer (HTC-2)
– Dual-function: measures temperature and humidity simultaneously.
– High-precision sensors for reliable, repeatable readings.
– Wide measurement range: -50°C to 70°C (-58°F to 158°F) and 10% to 99% RH.
– Records and displays minimum and maximum values for easy monitoring.
– Portable and versatile mounting: fold-out stand, magnetic backing, or wall mount.
– Battery powered (2 x AAA), simple Celsius/Fahrenheit switching and user-friendly controls.SKU: n/a
Related products
-
Boards, Modules and Accessories, Sensors And Modules
3D Printer Mechanical Limit Switch Module
- High-precision mechanical limit detection for accurate end-stops
- Durable construction built to withstand mechanical wear
- Versatile compatibility with 3D printers, CNC machines, and automation
- Easy integration with clear connection terminals for simple wiring
- Compact form factor to fit into tight spaces and complex assemblies
- Reliable position sensing and safety interlock capability
SKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
5V 4-Channel Arduino Relay Module Board
- Control up to 4 devices independently with four relay channels.
- Supports 250V AC/10A or 30V DC/10A per channel for high-power loads.
- Optocoupler isolation protects your microcontroller from high-voltage circuits.
- LED indicators provide clear visual status for each relay channel.
- Standard 5V TTL inputs — compatible with Arduino, Raspberry Pi and most MCUs.
- Screw terminals and mounting holes for secure wiring and easy installation.
SKU: n/a -
Boards, Modules and Accessories, Accessories
Screw Terminal Block Connector 2-Pin and 3-Pin
– Available in 2-pin and 3-pin configurations to suit different wiring needs
– Simple screw terminal design for quick, secure wire connections
– Durable plastic housing and metal screw contacts for long-lasting reliability
– Compact, space-saving form factor for tight installations
– Color-coded terminals and marked pins for easy identification
– High voltage rated for both low and high power applicationsSKU: n/a -
Boards, Modules and Accessories, Sensors And Modules
5V 2-Channel Arduino Relay Module Board
– Dual-channel relay board to control two independent high-power circuits
– Compatible with Arduino, Raspberry Pi, ESP32 and most microcontrollers
– Switches typical loads up to 10A (250VAC / 30VDC) per channel
– Onboard LEDs and screw terminals for secure wiring and status feedback
– Selectable low-level or high-level trigger with opto-isolation jumper for safer interfacing
– Compact PCB footprint ideal for home automation, robotics, IoT, and industrial projectsSKU: n/a
Reviews
There are no reviews yet