embedded systems
Showing all 15 resultsSorted by popularity
- Boards, Modules and Accessories, Boards and Programmers
ESP32 Wi-Fi + Bluetooth Module (30 Pin) (Pre-Soldered)
Boards, Modules and Accessories, Boards and ProgrammersESP32 Wi-Fi + Bluetooth Module (30 Pin) (Pre-Soldered)
– ESP32 Wi-Fi Bluetooth Module for seamless wireless communication
– Pre-soldered 30-pin ESP32 module for quick plug-and-play setup
– Ideal ESP32 module for Arduino, makers, and IoT projects
– Compact and low-power ESP32 development board for fast prototyping
– Compatible with smart home, wearable, and remote monitoring systems
– Best ESP32 Wi-Fi Bluetooth module price in Pakistan
– Ready-to-use ESP32 pre-soldered module for reliable long-term operationSKU: n/a - Boards, Modules and Accessories, Wireless Communication
NRF24L01 Wireless Transceiver Module
– Compact, low-power 2.4GHz wireless transceiver ideal for IoT and maker projects
– Supports data rates of 250 kbps, 1 Mbps, and 2 Mbps
– Up to 100 m range with an external antenna
– Easy SPI interface for Arduino, Raspberry Pi, and other microcontrollers
– Energy-saving low power mode for long battery life
– Affordable, well-documented module with extensive tutorials and librariesSKU: n/a - Boards, Modules and Accessories
RS422-TTL Full Duplex MAX490 to TTL Module
– Full-duplex RS422 to TTL conversion using the MAX490 transceiver
– Bidirectional, stable data transfer for long-distance serial links
– Compatible with Arduino, microcontrollers, robotics, UAVs and industrial systems
– Easy integration: TTL-level TX/RX pins plus differential RS422 A/B pairs
– Ideal for serial communication modules, RC systems, IoT and control systems
– Buy online in Pakistan for fast delivery and reliable signal conversionSKU: n/a - Boards, Modules and Accessories, Boards and Programmers
Arduino Nano V3 Board Type-C (Pre-Soldered)
– Pre-soldered header pins for immediate plug-and-play use
– USB Type-C port for modern power and data connectivity
– Built-in ATmega328P microcontroller for reliable performance
– Compatible with Arduino IDE, CH340 driver, and Nano shields
– Ideal for robotics, IoT, embedded systems, and classroom projects
– Compact form factor for tight spaces and fast prototypingSKU: n/a - Boards, Modules and Accessories, Boards and Programmers
ESP32 Wi-Fi + Bluetooth Module (38 Pin) (Pre-Soldered)
Boards, Modules and Accessories, Boards and ProgrammersESP32 Wi-Fi + Bluetooth Module (38 Pin) (Pre-Soldered)
- ESP32 Wi-Fi + Bluetooth module with dual-mode wireless connectivity (Wi-Fi and BLE).
- 38 GPIO pins with PWM, ADC, and DAC support for flexible interfacing.
- Pre-soldered header pins for quick plug-and-play prototyping and development.
- Power-efficient ESP32 chipset with dual-core 32-bit processor for responsive performance.
- Supports UART, SPI, and I2C communication for sensors, displays, and peripherals.
- Compact 48mm x 26mm module ideal for smart home, IoT, and wireless sensor projects.
SKU: n/a - Boards, Modules and Accessories
DC-DC Buck Converter Step Down Charging Module 5V 3A
– High-efficiency DC-DC buck converter delivering stable 5V at up to 3A
– LM2596-based step-down regulator for low heat and minimal power loss
– Micro USB input and USB charging support; ideal as a charging module for Arduino
– Compatible with Arduino, IoT devices, robotics, LED systems, and DIY electronics
– Wide input voltage range with built-in protection for safer operation in Pakistan
– Compact PCB design for easy integration into custom power supplies and projectsSKU: n/a - Boards, Modules and Accessories
MPU-9250 9-Axis Accelerometer Module
– 9-axis motion sensing: accelerometer, gyroscope, and magnetometer in one compact module
– High-precision MPU-9250 sensor for accurate motion tracking and stabilization
– I2C interface for easy integration with Arduino, ESP32 and other microcontrollers
– Ideal for drones, robotics, wearable tech, and IoT projects
– Reliable performance for UAV systems, robotics motion modules, and wearable sensors
– Ready for Arduino projects with available libraries and community supportSKU: n/a - Boards, Modules and Accessories
CJMCU-9548 TCA9548A 8-Channel I2C Expansion Board
– Expand one I2C bus to 8 independent channels with the TCA9548A multiplexer.
– Compatible with Arduino, Raspberry Pi, and most microcontrollers.
– Resolve I2C address conflicts and connect multiple identical sensors or displays.
– Compact CJMCU-9548 breakout for easy integration in robotics, IoT, and embedded projects.
– Simple control via I2C commands; supports up to 8 devices with minimal interference.
– Ideal for prototyping, labs, and industrial automation in Pakistan.SKU: n/a - Boards, Modules and Accessories
Raspberry Pi Zero 2W
- Compact single-board computer with a quad-core 1GHz ARM Cortex-A53 processor (RP3A0-AU).
- 512MB LPDDR2 RAM for smooth lightweight computing and multitasking.
- Built-in Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BLE) for wireless projects.
- Small 65mm × 30mm form factor with low power consumption for space-constrained builds.
- Versatile I/O: mini HDMI, Micro USB OTG, Micro USB power, CSI camera port and unpopulated 40-pin GPIO.
- Ideal for IoT, robotics, retro gaming, media streaming and DIY prototypes.
SKU: n/a - Boards, Modules and Accessories
STM32 Nucleo-F411RE Development Board
– 100 MHz ARM Cortex-M4 MCU (STM32F411RE) with DSP instructions and FPU
– 512 KB Flash, 128 KB RAM for complex applications
– Arduino Uno V3 compatible headers plus Morpho expansion pins
– Onboard ST-LINK debugger/programmer; USB or external power
– Multiple interfaces: I2C, SPI, UART, ADC, DAC, PWM
– Ideal for rapid prototyping, IoT, robotics and audio processingSKU: n/a - Boards, Modules and Accessories
STM32 Discovery Kit Development Board (STM32F429I)
- High-performance MCU: ARM Cortex-M4 core up to 180 MHz for demanding embedded applications.
- Large memory: 2MB Flash and 256KB SRAM to host complex firmware and data.
- Integrated 2.4″ TFT: Touchscreen-enabled display for graphical user interfaces and controls.
- Wide connectivity: USART, I2C, SPI, CAN and USB OTG for sensor and peripheral integration.
- On-board debugger: ST-LINK/V2-1 for easy programming and real-time debugging.
- Expandable ecosystem: Compatible with STM32 Nucleo boards, shields and popular development tools.
SKU: n/a - Boards and Programmers, Boards, Modules and Accessories
STM32 Nucleo-64 Development Board STM32F103RB
Boards and Programmers, Boards, Modules and AccessoriesSTM32 Nucleo-64 Development Board STM32F103RB
– STM32F103RB ARM Cortex-M3 microcontroller running up to 72 MHz
– 128 KB flash memory and 20 KB RAM for firmware and data
– On-board ST-LINK/V2-1 debugger/programmer with SWD interface
– Arduino Uno R3 and ST Morpho headers for shield and expansion compatibility
– Flexible power options: USB, external 5V, or 3.3V input
– Ideal for IoT prototypes, education, and industrial automation projectsSKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Raspberry Pi 4 Model B 4GB RAM Development Board
Boards and Programmers, Boards, Modules and AccessoriesRaspberry Pi 4 Model B 4GB RAM Development Board
- Quad-core ARM Cortex-A72 processor at 1.5GHz for responsive performance.
- 4GB LPDDR4 RAM for smooth multitasking and heavier workloads.
- Dual micro-HDMI outputs supporting dual 4K displays.
- Two USB 3.0 and two USB 2.0 ports plus Gigabit Ethernet for fast I/O.
- Built-in dual-band Wi-Fi and Bluetooth 5.0 for wireless connectivity.
- 40-pin GPIO header and microSD expansion for projects and storage.
SKU: n/a - Boards, Modules and Accessories, Sensors And Modules
Numeric Keypad Module (4×4)
– 4×4 matrix numeric keypad with 16 tactile keys (0-9, A-D, *, #)
– Soft click feedback and durable flexible membrane
– Easy 8-pin header connection for Arduino and Raspberry Pi
– Works from 3.3V to 5V for broad microcontroller support
– Compact size (approx. 70mm x 77mm) ideal for panels and breadboards
– Lightweight and easy to integrate into DIY, automation, and security projectsSKU: n/a - Boards and Programmers, Boards, Modules and Accessories
Arduino Pro Mini 5V 16Mhz ATMEGA328P Board
– ATMEGA328P microcontroller with 16MHz clock and 5V operation
– 14 digital I/O (6 PWM) and 6 analog inputs for flexible interfacing
– Memory: 32KB Flash (2KB bootloader), 2KB SRAM, 1KB EEPROM
– Ultra-compact: 18mm x 33mm and approx. 2 grams — ideal for space-constrained projects
– Programmable via Arduino IDE using an external USB-to-serial adapter
– Perfect for wearables, robotics, home automation and embedded systemsSKU: n/a
