Integrated Circuits (ICs)
Showing 1–15 of 62 resultsSorted by popularity
- Integrated Circuits (ICs)
L293D Dual H-Bridge Motor Driver IC (DIP)
– L293D Dual H-Bridge Motor Driver IC in a 16-pin DIP package for easy prototyping
– Drives 2 DC motors or 1 stepper motor with independent direction control
– Bidirectional motor control (forward and reverse) with PWM speed input
– Up to 600mA continuous output per channel, 1.2A peak
– Wide supply voltage range: 4.5V to 36V
– Built-in clamp diodes for back EMF protection; TTL/CMOS compatible inputsSKU: n/a - Integrated Circuits (ICs)
NE555 Timer IC (DIP)
– Versatile NE555 Timer IC in an easy-to-use 8-pin DIP package
– Operates in monostable, astable, and bistable modes
– Wide supply range: 4.5 V to 15 V for TTL and CMOS compatibility
– High output current to drive LEDs, relays, or small speakers
– Ideal for timers, oscillators, PWM, and audio tone generation
– Stable, reliable performance with minimal external componentsSKU: n/a - Integrated Circuits (ICs)
CD4017 Decade Counter IC (DIP)
– 5-stage Johnson decade counter with 10 decoded outputs (Q0–Q9)
– Ideal for LED chasers, light sequencers and timing circuits
– Wide supply voltage: 3V to 15V for TTL and CMOS compatibility
– Includes clock inhibit, reset and carry-out for cascading
– Standard DIP package for easy breadboard prototyping
– Low power consumption with high noise immunitySKU: n/a - Integrated Circuits (ICs)
7404 Hex Inverter NOT Gate IC (DIP)
- 7404 Hex Inverter NOT Gate IC with six independent logic inverters
- TTL 74xx family, standard-performance logic for reliable results
- Operates from 4.75 V to 5.25 V (typical 5 V supply)
- Standard 14-pin DIP package, breadboard and PCB friendly
- High-speed switching for waveform shaping and timing circuits
- Ideal for prototyping, educational labs, and DIY electronics projects
SKU: n/a - Integrated Circuits (ICs)
LM741 / UA741 Operational-Amplifier IC (DIP)
- General-purpose LM741 / UA741 operational amplifier in a standard DIP package
- Designed for signal amplification, conditioning, and analog processing
- Perfect for active filters, oscillators, and comparator circuits
- Breadboard-friendly DIP form factor for prototyping and education
- Wide supply range: ±5V to ±18V; supports single and dual supply operation
- Internally frequency-compensated and includes short-circuit protection
SKU: n/a - Integrated Circuits (ICs)
MAX233 Multichannel RS-232 Driver/Receiver IC
– Dual RS-232 driver and receiver (2 transmitters, 2 receivers)
– Internal charge-pump capacitors, no external caps required
– Single +5V supply operation for TTL/CMOS systems
– Converts TTL/CMOS logic levels (0-5V) to RS-232 levels (±10V)
– Full-duplex serial communication support with low power consumption
– Standard 20-pin DIP package ideal for breadboards and PCBs
– Compatible with RS-232, RS-422, and UART systemsSKU: n/a - Integrated Circuits (ICs)
MAX232 RS-232 to Serial TTL Converter IC
– Converts RS-232 voltage levels (±10V) to TTL logic levels (0V to 5V) and vice versa
– Dual transmitters and receivers for full-duplex serial communication
– Single +5V supply with internal charge pump capacitors
– Low power consumption and support for data rates up to 120 kbps
– Standard 16-pin DIP package for easy prototyping and breadboarding
– TTL-compatible logic for direct interfacing with Arduino, Raspberry Pi, PIC, AVR
– Wide operating temperature range and good noise immunitySKU: n/a - Integrated Circuits (ICs)
74373 Octal D-Type Latch with 3-Output State IC
– Octal (8-bit) D-type transparent latch with tri-state outputs
– 3-state outputs for bus interfacing and shared-bus control
– Latch Enable (LE) for transparent or latched operation
– Output Enable (OE) to place outputs in high-impedance (Hi-Z)
– TTL logic family, VCC 4.75V to 5.25V, housed in 20-pin DIP
– Fast performance (typ. 20 ns), ±8 mA drive capability for bufferingSKU: n/a - Integrated Circuits (ICs)
74251 8-Inputs Data Selector/Multiplexer IC
– High-performance 8-to-1 data selector/multiplexer for digital signal routing
– 3-bit select inputs (S2, S1, S0) to choose one of D0 to D7
– True (Y) and complemented (W) outputs plus tri-state enable (G)
– TTL logic family for fast switching and compatibility with TTL/CMOS devices
– Packaged in a standard 24-pin DIP for easy prototyping and PCB assembly
– Low power consumption, ±8 mA output current and typical 20 ns propagation delaySKU: n/a - Integrated Circuits (ICs)
74197 Asynchronous 4-Bit Binary Counter IC (DIP)
– 4-bit asynchronous (ripple) binary counter, counts 0 to 15
– TTL logic family, 14-pin DIP package
– High-speed, low-power operation with typical 25 ns propagation delay
– Clear (reset) and preset inputs for flexible control
– Easy cascading for multi-stage counting and frequency division
– Ideal for digital clocks, event counters, timers and sequencingSKU: n/a - Integrated Circuits (ICs)
74132 Quad 2-Input NAND Gate Schmitt Trigger IC (DIP)
– Quad 2-input NAND gates with Schmitt-trigger inputs for clean switching
– TTL compatible, operates at 4.75V to 5.25V
– High noise immunity and input hysteresis for stable transitions
– Typical propagation delay ~22 ns, fan-out of 10 LS-TTL loads
– Low power consumption in a standard 14-pin DIP package
– Ideal for debouncing, waveform shaping, oscillators and timing circuitsSKU: n/a - Integrated Circuits (ICs)
7473 JK Flip-Flop IC (DIP)
– Dual JK flip-flops in a single DIP-14 package
– Edge triggered operation for accurate timing
– TTL-compatible inputs and outputs for easy interfacing
– Low power consumption with high-speed switching
– Includes clear (reset) and clock inputs for each flip-flop
– Ideal for frequency division, binary counting, and data storageSKU: n/a - Integrated Circuits (ICs)
7442 BCD to Decimal Decoder IC (DIP)
– 4 binary inputs (A, B, C, D) decode BCD to one-of-ten outputs (0–9).
– Ten active-low outputs; each output goes LOW for its corresponding BCD code.
– TTL-compatible logic levels for direct microcontroller and logic interfacing.
– DIP-16 package for easy breadboard and PCB integration.
– Fast propagation delay and low power consumption for reliable digital operation.
– Ideal for 7-segment displays, LED indicators, counters, and prototyping.SKU: n/a - Integrated Circuits (ICs)
7428 Quad 2-Input NOR Gate IC (DIP)
– Quad package with four independent 2-input NOR gates in a single DIP-14 IC.
– TTL-compatible inputs and outputs for easy interfacing with 74xx logic.
– Fast switching with typical 10 ns propagation delay for high-performance designs.
– Low power consumption; operates on a 5V (4.75V–5.25V) DC supply.
– Ideal for prototyping on breadboards and integration on PCBs.
– Suited for digital systems, logic design, signal inversion, and educational projects.SKU: n/a - Integrated Circuits (ICs)
7417 Hex Buffer High Voltage Open Collector IC (DIP)
– Six independent buffer/inverter gates in one DIP-14 package
– Open-collector outputs for direct connection to higher-voltage loads
– High output voltage tolerance up to 30V with 40 mA sink current
– TTL-compatible inputs for easy interfacing with 5V logic
– Ideal for driving LEDs, relays, solenoids and transistor stages
– Fast switching (typical 10 ns) with low power consumption
– Great for prototyping on breadboards, PCBs and educational projectsSKU: n/a
About Integrated Circuits (ICS)
Integrated Circuits (ICs) are the backbone of modern electronics, combining multiple electronic components such as transistors, resistors, and capacitors into a single compact package. At ColgRoad.com, we provide a wide range of ICs that are essential for circuit design, automation, and embedded systems projects. Whether you’re a student, hobbyist, or professional engineer, our IC collection covers everything from basic logic gates to complex counters and motor drivers.
Popular ICs include the NE555 and NE556 Timer ICs for pulse generation and oscillators, L293D Motor Driver IC for controlling DC and stepper motors, CD4017 Decade Counter IC for digital counting, and BCD to 7-Segment Decoder ICs like CD4511 and CD4026 for display interfacing. For logic applications, we stock NAND, NOR, XOR, and OR gate ICs, while multiplexer ICs such as CD4051 and CD4052 make signal routing efficient.
Our ICs are reliable, affordable, and sourced to meet the needs of both small-scale electronic projects and industrial applications. With ColgRoad.com, you can be sure of genuine products and fast delivery across Pakistan.
FAQs
1. What are Integrated Circuits (ICs)?
Integrated Circuits (ICs) are semiconductor devices that combine multiple electronic components like transistors, resistors, and capacitors into a single package for efficient circuit design.
2. Which ICs are commonly used in electronics projects?
Popular ICs include the NE555 Timer, NE556 Dual Timer, L293D Motor Driver, CD4017 Decade Counter, CD4511 BCD to 7-Segment Decoder, and logic gate ICs such as NAND, NOR, XOR, and OR gates.
3. Can I use ICs for motor control?
Yes, motor driver ICs like the L293D are widely used to control DC motors and stepper motors in robotics and automation projects.
4. Are ICs suitable for beginners in electronics?
Absolutely. ICs like the NE555 Timer and CD4017 Counter are easy to use and commonly found in beginner-friendly electronics kits and DIY projects.
5. Where can I buy Integrated Circuits (ICs) in Pakistan?
You can buy genuine ICs at ColgRoad.com, where we offer a wide range of logic, timer, counter, and driver ICs with affordable pricing and fast nationwide delivery.
