-
BMS Modules and Accessories
4S 16.8V 40A Li-Ion Cell BMS Charging Protection Module
- Supports 4S (16.8V) Li-Ion / Li-Po battery packs
- Handles up to 40A continuous discharge current
- Overcharge cutoff at ~4.25V per cell
- Over-discharge cutoff at ~2.7V per cell
- Provides overcurrent & short-circuit protection
- Features cell balancing for stability & efficiency
- Strong PCB design for high-performance projects
- Ideal for e-bikes, robotics, solar storage, and DIY packs
SKU: n/a -
BMS Modules and Accessories
3S 12.6V 60A Li-Ion Cell BMS Charging Protection Module
- Supports 3S (12.6V) Li-Ion / Li-Po batteries
- Handles up to 60A continuous discharge current
- Overcharge cutoff at ~4.25V per cell
- Over-discharge cutoff at ~2.7V per cell
- Built-in overcurrent & short-circuit protection
- Provides cell balancing for longer battery life
- Rugged PCB design for high-power applications
- Suitable for e-bikes, scooters, robotics, and solar storage
SKU: n/a -
BMS Modules and Accessories
2S 7.4V 8A Li-Ion Cell BMS Charging Protection Module
- Supports 2S (2-cell) 7.4V Li-Ion / Li-Po batteries
- Provides 8A continuous discharge current
- Overcharge protection for safe battery operation
- Over-discharge protection to extend lifespan
- Overcurrent and short-circuit protection
- Maintains cell voltage balance
- Compact and easy-to-install module
- Suitable for DIY battery packs, robotics, LEDs, and power banks
SKU: n/a -
Sensors And Modules
INMP441 High Precision Omindirectional Microphone Module
- INMP441 MEMS digital microphone
- Omnidirectional 360° sound capture
- Direct I2S digital output, no ADC needed
- High SNR (~61 dBA) for clear audio
- Frequency response: 60 Hz – 15 kHz
- Works with ESP32, Raspberry Pi, I2S MCUs
- Low power, compact design for easy use
- Perfect for IoT, smart speakers & AI voice projects
SKU: n/a -
Sensors And Modules
MAX98357 I2S 3W Class-D Audio Amplifier Module
- MAX98357A I2S digital Class-D amplifier
- Up to 3W output power for 4Ω speakers
- No DAC required, direct I2S input
- Works with ESP32, Raspberry Pi, Arduino
- Built-in gain control options
- High efficiency, low distortion sound
- Integrated short-circuit & thermal protection
- Operates on 2.5V – 5.5V power supply
- Perfect for DIY speakers & IoT audio projects
SKU: n/a -
Boards and Programmers
Arduino Nano V3 Board Type-C (Solderless)
- Based on ATmega328P microcontroller
- USB Type-C connector for power & programming
- Solderless design
- Operates at 5V, 16 MHz clock speed
- 22 I/O pins with PWM, ADC, UART, SPI, I2C
- Preloaded with Arduino bootloader
- Compact & cost-effective for DIY projects
- Ideal for education, IoT & robotics
SKU: n/a -
Boards and Programmers
ESP32 WiFi + Bluetooth Module Type-C (38 Pin) (Pre-Soldered)
- ESP32-WROOM-32 chip with Wi-Fi + Bluetooth
- 38 GPIO pins for versatile interfacing
- USB Type-C port for programming & power
- Pre-soldered headers for breadboard-ready use
- Dual-core CPU up to 240 MHz
- Built-in PWM, ADC, DAC, UART, SPI, I2C, I2S
- Supports BLE & Classic Bluetooth
- Works with Arduino IDE, MicroPython & ESP-IDF
- Perfect for IoT, robotics & smart automation projects
SKU: n/a
- Punjab, Pakistan
- 2 products sold
- On College Road from 2023
- Owner: Sharafat Shahzad
