Shop
Showing 571–585 of 784 resultsSorted by popularity
- Sensors And Modules
DS18B20 Temperature Sensor
- Digital temperature sensor with 1-Wire communication for simple wiring and multi-drop networks
- Accurate readings from -55°C to +125°C with ±0.5°C accuracy ( -10°C to +85°C )
- Programmable 9 to 12 bit resolution to balance speed and precision
- Operates from 3.0V to 5.5V and supports parasitic power mode
- Unique 64-bit serial code lets you connect many sensors on the same bus
- Available in TO-92 package and waterproof stainless-steel probe for versatile installations
SKU: n/a - Accessories
TIP122 NPN Darlington Power Transistor (100V 5A)
- High-gain NPN Darlington transistor for easy drive from logic and microcontrollers
- Collector-emitter voltage (Vce) up to 100V
- Continuous collector current (Ic) rated at 5A
- Very high current gain (hFE typically >1000) with low base current requirement
- TO-220 package for straightforward mounting and efficient heat dissipation
- Ideal for motor drivers, power switching, relay and solenoid drivers, and amplifiers
SKU: n/a - Buck, Boost Converters and Regulators
LM317 Adjustable Voltage Regulator DC-DC
– Adjustable output voltage: 1.25V to 37V
– Output current up to 1.5A
– Built-in current limiting and thermal protection
– High stability and reliable performance
– Ideal for power supplies, battery chargers, and LED drivers
– TO-220 package, easy to mount and heat-sinkSKU: n/a - Integrated Circuits (ICs)
NE556 Dual Timer IC (DIP)
– Contains two independent NE555 timers in a single DIP package
– Ideal for timing, PWM, and oscillator circuits
– Operates in monostable and astable modes for flexible timing
– Wide supply range: 4.5 V to 16 V for versatile use
– High output drive capability suitable for LEDs and motors
– Breadboard and PCB friendly DIP package for prototypingSKU: n/a - Integrated Circuits (ICs)
74386 Quad 2-Input XOR Gate IC (DIP)
- Contains four independent 2-input Exclusive-OR (XOR) gates in one DIP package
- Designed with standard TTL logic compatibility for reliable digital performance
- Ideal for adders, parity generators, error detection, and comparators
- DIP package is breadboard-friendly and suitable for through-hole PCB projects
- Low power consumption with high noise immunity for stable switching
SKU: n/a - Integrated Circuits (ICs)
CD4511 BCD to 7-Segment Decoder/Driver IC (DIP)
– Converts 4-bit BCD input into 7-segment outputs for LED displays
– CMOS design with low power consumption and wide supply range (3V to 15V)
– Includes LE (Latch Enable), LT (Lamp Test), and BI (Blanking Input) control pins
– Directly drives common cathode 7-segment LED displays without extra drivers
– Available in easy-to-use DIP-16 package for breadboard and PCB integration
– Ideal for clocks, counters, calculators, and other numeric display systemsSKU: n/a - Integrated Circuits (ICs)
CD4071 Quad 2-Input OR Gate IC (DIP)
– Contains 4 independent 2-input OR gates in a single 14-pin DIP package
– CMOS technology for low power consumption and high reliability
– Wide supply voltage range: 3 V to 15 V for flexible system design
– High noise immunity and TTL/CMOS logic compatibility
– Ideal for digital logic, control systems, timing circuits, and education
– Standard DIP footprint for easy prototyping and breadboard useSKU: n/a - Integrated Circuits (ICs)
CD4060 14-Stage Binary Counter IC (DIP)
- 14-stage ripple-carry binary counter with integrated oscillator
- Built-in oscillator configurable with external R-C components
- Wide supply voltage: 3V to 15V for flexible designs
- Frequency division ratios from 2 up to 16,384 for timing and clocks
- Low power CMOS operation with high noise immunity
- Standard DIP package ideal for breadboards and prototyping
SKU: n/a - Integrated Circuits (ICs)
CD4052 Dual 4-Channel Multiplexer/Demultiplexer IC (DIP)
- Dual 4-channel analog multiplexer/demultiplexer in a single DIP package.
- Operates from 3V to 15V supply for flexible system integration.
- Handles both analog and digital signals with low crosstalk.
- Low power CMOS design with high noise immunity.
- Easy prototyping with through-hole DIP package.
SKU: n/a - Integrated Circuits (ICs)
CD4051 Single 8-Channel Multiplexer/Demultiplexer IC (DIP)
- Single 8-channel analog/digital multiplexer and demultiplexer
- Wide supply range: 3 V to 15 V (CMOS)
- Three address inputs (A, B, C) for channel selection
- Enable (inhibit) pin to enable or disable operation
- Bidirectional channels suitable for analog or digital signals
- Standard 16-pin DIP package for easy breadboarding and through-hole use
SKU: n/a - Integrated Circuits (ICs)
CD4026 7-Segment Counter IC (DIP)
– Built-in decade counter with integrated 7-segment decoder and display driver
– Directly drives common-cathode 7-segment displays
– Wide supply voltage: 3 V to 15 V (TTL & CMOS compatible)
– Low power consumption with high noise immunity
– Includes clock, reset, carry-out, and display enable inputs
– DIP package ideal for breadboards and prototypingSKU: n/a - Integrated Circuits (ICs)
CD4015 Dual 4-Stage Shift Register IC (DIP)
- Dual 4-bit shift registers in one DIP IC for compact designs
- Serial input with parallel output — ideal for serial-to-parallel conversion
- Wide operating voltage range: 3 V to 15 V for flexible power supply options
- Low-power CMOS design with high noise immunity for reliable performance
- TTL-compatible inputs for easy interfacing with common logic families
- Breadboard-friendly DIP package — great for prototyping and hobby projects
- Common uses: digital counters, timing/sequencing, data registers, and microcontroller systems
SKU: n/a - Integrated Circuits (ICs)
CD4013 Dual D-Type Flip-Flop IC (DIP)
- Contains two independent, edge-triggered D-type flip-flops in one DIP package
- Each flip-flop has D, CLK, Set, Reset inputs and complementary Q and Q̅ outputs
- Wide supply voltage: 3V to 15V for flexible system integration
- Low power CMOS technology with high noise immunity for stable operation
- Ideal for frequency division, counters, data latching, and timing circuits
- Standard DIP package for easy breadboard prototyping and PCB mounting
SKU: n/a - Integrated Circuits (ICs)
CD4011 Quad 2-Input NAND Gate IC (DIP)
– CD4011 Quad 2-Input NAND Gate IC in a compact 14-pin DIP package
– Contains four independent 2-input NAND gates for digital logic
– Wide operating voltage: 3 V to 15 V for flexible system design
– Low power consumption with high noise immunity for reliable switching
– TTL and CMOS compatible, ideal for prototyping and educational use
– Commonly used in combinational logic, control circuits, and DIY projectsSKU: n/a - Integrated Circuits (ICs)
CD4001 Quad 2-Input NOR Gate IC (DIP)
- CMOS Quad 2-Input NOR gate IC with four independent gates
- Wide supply voltage range: 3-15V for flexible use
- High noise immunity and low power consumption
- Standard DIP package – breadboard and PCB friendly
- Can implement any logic function since NOR is universal
- Ideal for prototyping, educational labs, and digital designs
SKU: n/a
