Shop
Showing 256–270 of 625 resultsSorted by popularity
- Accessories
1-Slot Type-C Lithium Battery Charger (16340/14500/18650 Cells)
– Single-slot charger for one lithium-ion cell: compatible with 16340, 14500, and 18650
– USB Type-C input for universal, reliable charging from adapters, laptops, or power banks
– Auto-adjust charging current (0.5A to 1A) for safe and efficient charging
– LED status indicator: Red = Charging, Green = Fully Charged
– Multiple safety protections including overcharge, short-circuit, overheat, reverse polarity, and over-discharge recovery
– Compact ABS housing with spring-loaded contacts for secure battery placement and portabilitySKU: n/a - Accessories
2-Slot Type-C Lithium Battery Charger (16340/14500/18650 Cells)
– Charges 2 cylindrical lithium-ion cells at once with independent slots
– Compatible with 16340, 14500, and 18650 batteries
– Modern USB Type-C input for universal compatibility and durable connection
– Smart charging with auto-adjust current, smart cut-off, and LED status indicators
– Multiple safety protections: overcharge, short-circuit, over-discharge recovery, overheat, and reverse polarity
– Compact, lightweight ABS construction with spring-loaded contacts for secure fitSKU: n/a - Accessories
18650 2-Cell Battery Holder with Cover and On/Off Switch
• Holds 2 × 18650 Li-ion batteries (not included) for approx. 7.4V nominal
• Built-in ON/OFF rocker switch for easy power control
• Snap-on protective cover prevents dust and accidental contact
• Durable ABS enclosure with pre-soldered red (+) and black (-) leads
• Compact and lightweight (approx. 78 × 42 × 20 mm); ideal for portable use
• Ready for DIY electronics, robotics, Arduino, Raspberry Pi, and lighting projectsSKU: n/a - STEM & DIY Learning Kits
Raspberry Pi 5 Complete Kit (4GB/8GB) with F240 Component Box
– All-in-one Raspberry Pi 5 kit with choice of 4 GB or 8 GB RAM
– Includes 5V 5A USB-C power supply, ABS case, heatsink and cooling fan
– 32GB high-speed microSD card and micro-HDMI to HDMI cable included
– GPIO header extension and jumper wires for electronics projects
– F240 modular component box for organizing resistors, LEDs, sensors and modules
– Ready for prototyping, learning, media, IoT, robotics and retro gamingSKU: n/a - Boards and Programmers
Raspberry Pi 5 Model B 4GB RAM Development Board
– Latest Raspberry Pi 5 Model B with 4GB LPDDR4X-4267 RAM
– 2.4GHz quad-core 64-bit Arm Cortex-A76 CPU for 2 to 3x faster performance
– VideoCore VII GPU with dual 4Kp60 HDMI output and hardware video decoding
– High-speed I/O: 2x USB 3.0, 2x USB 2.0, Gigabit Ethernet, PCIe expansion
– Dual MIPI camera and display connectors plus 40-pin GPIO header
– Supports microSD, optional NVMe via PCIe adapter, and Raspberry Pi OS/UbuntuSKU: n/a - Batteries, Cells and Power Supply
ZOP Power 4S 14.8V 5500mAh 25C LiPo Battery
- High-capacity 5500mAh LiPo battery for long runtimes
- 4S configuration with 14.8V nominal voltage for powerful output
- 25C continuous discharge rate (max 137.5A) for demanding RC and drone use
- XT60 main connector and JST-XH balance connector for safe, reliable connections
- Lightweight, compact design (approx. 155 x 45 x 35mm; 500g–550g)
- Durable construction supporting 300 to 500 charge/discharge cycles
SKU: n/a - Batteries, Cells and Power Supply
ZOP Power 3S 11.1V 3300mAh 25C LiPo Battery
– High-capacity 3300mAh (36.63Wh) LiPo pack for extended runtimes
– 3S (11.1V) configuration with 25C continuous discharge
– Maximum discharge current 82.5A for demanding RC applications
– XT60 power connector and JST-XH balance lead for wide compatibility
– Compact, lightweight design (approx. 135 x 42 x 26 mm, 230–250 g)
– Durable construction with 300–500 recharge cycles when used properlySKU: n/a - Batteries, Cells and Power Supply
ZOP Power 3S 11.1V 2800mAh 25C LiPo Battery
– 11.1V (3S) nominal voltage with 2800mAh capacity for extended runtimes
– 25C continuous discharge (up to 70A max) for strong power bursts
– Pre-fitted XT60 power connector and JST-XH balance plug for easy hookup
– Lightweight and compact: approx. 135 × 42 × 23 mm, 200–220 g
– Durable construction with 300–500 cycles when used and stored correctly
– Ideal for RC drones, FPV racing, airplanes, cars, boats, and roboticsSKU: n/a - Batteries, Cells and Power Supply
ZOP Power 3S 11.1V 2200mAh 25C LiPo Battery
– 11.1V nominal voltage (3S) with 2200mAh capacity (24.42Wh)
– 25C continuous discharge rate for stable performance
– XT60 power connector and JST-XH balance plug for broad compatibility
– Maximum discharge current 55A (2200mAh x 25C)
– Compact and lightweight: approx. 105 x 35 x 25 mm, 160g to 180g
– Durable LiPo design with 300 to 500 recharge cycles under proper use
– Ideal for drones, RC planes, cars, boats, FPV racing, and roboticsSKU: n/a - Batteries, Cells and Power Supply
ZOP Power 3S 11.1V 1800mAh 25C LiPo Battery
– 11.1V (3S) nominal voltage with 1800mAh capacity
– 25C continuous discharge for reliable high-current output
– XT60 power connector and JST-XH balance lead for easy hookup
– Lightweight and compact design (approx. 105 x 35 x 22 mm)
– Maximum continuous current 45A (1800mAh × 25C)
– Durable LiPo chemistry with 300–500 charge/discharge cyclesSKU: n/a - Batteries, Cells and Power Supply
ZOP Power 3S 11.1V 1300mAh 25C LiPo Battery
– High-performance 3S LiPo battery: 11.1V nominal voltage
– 1300mAh capacity for balanced flight time and power
– 25C continuous discharge (max 32.5A) for strong motor bursts
– XT60 main connector and JST-XH balance plug for easy hookups
– Lightweight, compact design (approx. 70 x 34 x 22 mm, 100–110 g)
– Long cycle life ideal for drones, RC planes, cars, and DIY roboticsSKU: n/a - Batteries, Cells and Power Supply
3.7V 10000mAh 1260110 37Wh LiPo Rechargeable Battery
– High-capacity 10000mAh (37Wh) lithium polymer battery
– Nominal voltage 3.7V for single-cell devices
– Slim rectangular pack: 12mm x 60mm x 110mm (approx.)
– Optional PCM protection for overcharge, over-discharge, and short circuit safety
– Lightweight design ideal for drones, robotics, power banks, and IoT projects
– Rated for 300 to 500 charge cycles depending on usage and conditionsSKU: n/a - Batteries, Cells and Power Supply
3.7V 2000mAh 103450 7.4Wh LiPo Rechargeable Battery
• High-capacity 2000mAh (7.4Wh) single-cell LiPo battery
• Nominal voltage 3.7V for stable, long-lasting power
• Slim 103450 format: approx. 10 × 34 × 50 mm for compact designs
• Lightweight and high energy density ideal for portable electronics
• Optional PCM protection available for safe charging and discharging
• Suitable for drones, RC models, IoT devices, wearables and roboticsSKU: n/a - Batteries, Cells and Power Supply
3.7V 1200mAh 603450 4.44Wh LiPo Rechargeable Battery
– Nominal voltage: 3.7V lithium polymer (LiPo) rechargeable cell
– Capacity: 1200mAh (4.44Wh) for long runtimes in compact devices
– Slim dimensions: approx. 6mm × 34mm × 50mm for space‑constrained designs
– High energy density and lightweight construction for IoT, wearables, and RC
– Optional PCM protection available to guard against overcharge, overdischarge, and short circuits
– Rated 300–500 charge cycles depending on usage and handlingSKU: n/a - Batteries, Cells and Power Supply
3.7V 800mAh 803035 2.96Wh LiPo Rechargeable Battery
– Nominal voltage 3.7V, capacity 800mAh (2.96Wh)
– Slim 8 x 30 x 35 mm profile ideal for tight spaces
– Lightweight lithium polymer chemistry for high energy density
– Optional PCM protection against overcharge, over-discharge, and short circuit
– 300 to 500 charge/discharge cycles under normal use
– Ideal for IoT devices, wearables, RC models, DIY electronics, and handheld gadgetsSKU: n/a
