-8%

MAX98357 I2S 3W Class-D Audio Amplifier Module

Availability:

In stock


  • MAX98357A I2S digital Class-D amplifier for direct digital audio playback
  • Up to 3W output power into 4Ω speakers
  • Direct I2S input, no external DAC required
  • Works with ESP32, Raspberry Pi, Arduino (I2S) and other microcontrollers
  • Built-in selectable gain options (3dB to 18dB)
  • High efficiency with low distortion and low noise
  • Integrated short-circuit and thermal protection, 2.5V to 5.5V supply

 600  650

In stock

MAX98357 I2S 3W Class-D Audio Amplifier Module Overview

The MAX98357 I2S 3W Class-D Audio Amplifier Module is a compact, high-efficiency digital audio amplifier based on the MAX98357A IC. It accepts I2S digital audio directly and drives a speaker with up to 3W of output power into a 4 ohm load. This module eliminates the need for a separate DAC and is ideal for portable audio devices, IoT projects, and DIY speakers.

Product Photo

Key Features

  • MAX98357A I2S Class-D amplifier IC for direct digital audio input
  • Up to 3W output power at 4Ω speakers
  • I2S input interface (no external DAC required)
  • Selectable gain settings: 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
  • High efficiency, low distortion, and low noise audio
  • Integrated thermal and short-circuit protection for reliability
  • Operates from 2.5V to 5.5V for wide compatibility
  • Compact PCB design for easy integration into projects

Technical Specifications

  • Amplifier IC: MAX98357A
  • Input: I2S digital audio (LRCLK/WS, BCLK, DIN/SD)
  • Output power: Up to 3W into 4Ω
  • Supply voltage: 2.5V to 5.5V
  • Gain options: 3dB, 6dB, 9dB, 12dB, 15dB, 18dB
  • Protection: Thermal shutdown and short-circuit protection
  • Typical use: Single-channel (mono) speaker output

Compatibility and Integration

This module works with microcontrollers and single-board computers that support I2S audio, including ESP32, Raspberry Pi, and Arduino boards with I2S capability. Because the module accepts I2S directly, it removes the need for a separate DAC and simplifies audio pipeline integration.

Basic Wiring Tips

  • Connect the board VCC to a stable 2.5V to 5.5V supply and GND to ground.
  • Connect I2S signals from the host: LRCLK (WS), BCLK (SCK), and SD (DIN) to the matching pins on the module. Check your board silkscreen for labels.
  • Connect a 4Ω speaker to the speaker output terminals provided on the module. Observe polarity.
  • Place decoupling capacitors on the supply near the module if your power rail is noisy or the speaker draws bursts of current.
  • Refer to your microcontroller documentation for I2S configuration (sample rate, bit depth, and channel format).

Gain Selection and Audio Tuning

The module includes selectable gain steps for system-level volume control. Available gain options are 3dB, 6dB, 9dB, 12dB, 15dB, and 18dB. Choose a gain that matches your speaker sensitivity and desired maximum volume. For cleaner audio, start at a lower gain and increase as needed.

Applications

  • DIY portable speakers and Bluetooth speaker projects
  • Voice assistants, smart home audio devices, and IoT audio outputs
  • Raspberry Pi and ESP32 audio streaming projects
  • Educational electronics and hobbyist audio experiments

Practical Tips and Recommendations

  • Use a 4Ω speaker for best power delivery; higher impedances will reduce maximum output power.
  • Keep speaker wires short to avoid EMI and potential oscillation with the Class-D amplifier.
  • If using with battery-powered devices, monitor supply voltage under load; Class-D amplifiers are efficient but transient speaker demands can dip the rail.
  • Always follow the module silkscreen and manufacturer datasheet for pinouts and detailed electrical limits.

What You Get

  • 1 x MAX98357 I2S 3W Class-D Audio Amplifier Module
  • Documentation and example wiring guidelines (online)

Note: Images are for illustration purposes only.

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “MAX98357 I2S 3W Class-D Audio Amplifier Module”

There are no reviews yet.

Vendor Information

  • Store Name: College Road Electronics
  • Vendor: College Road Electronics
  • Address: Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
    Rawalpindi
    Punjab
    46000
  • 3.00 rating from 2 reviews
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare
0
    0
    Your Cart
    Your cart is emptyReturn to Shop
    WhatsApp
    Call