16×2 LCD Character Display Module (Green Backlight)

16×2 LCD Character Display Module (Green Backlight)

The 16×2 LCD Character Display Module is a compact, reliable display ideal for embedded systems, DIY electronics and commercial devices. With a green LED backlight and HD44780-compatible driver, this module delivers clear, high-contrast output for status messages, sensor readings and user interfaces.

Key Features

• Display format: 16 characters x 2 lines, perfect for short messages and menus.
• Controller: HD44780 or equivalent for broad compatibility with microcontrollers and development boards.
• Backlight: Green LED backlight for visibility in dim environments.
• Interface modes: Supports both 4-bit and 8-bit parallel modes to suit different pin-availability and speed needs.
• Adjustable contrast: Built-in potentiometer allows easy contrast tuning for best readability.
• Low power: Energy-efficient design suitable for battery-powered applications.
• Custom characters: Create and display custom symbols, icons and simple graphics.
• Easy integration: Standard 14/16-pin header makes wiring to Arduino, Raspberry Pi and other microcontrollers straightforward.

Technical Specifications

• Display format: 16 x 2 characters
• Controller/Driver: HD44780 or equivalent
• Operating voltage: 4.5 V to 5.5 V
• Backlight: Green LED (typical)
• Interface: Parallel (4-bit or 8-bit)
• Character size: ~5.00 mm x 8.00 mm
• Module size: typically ~80 mm x 36 mm x 10 mm (varies by model)
• Operating temperature: -20°C to +70°C

Applications

• DIY electronics and maker projects
• Embedded system status displays and user interfaces
• Industrial control panels for real-time data and error messages
• Home automation displays for temperature, humidity and alerts
• Educational kits and microcontroller learning tools
• Consumer devices such as clocks, meters and portable instruments

Getting Started with Arduino and Raspberry Pi

Wiring the 16×2 LCD is straightforward. Use the 4-bit mode to save I/O pins on Arduino or use an I2C/serial backpack for even simpler connections. Typical steps:

• Connect VCC to 5V and GND to ground.
• Adjust the potentiometer for contrast control.
• Connect RS, RW, E and data lines (D4-D7 for 4-bit mode) to your microcontroller pins.
• Use standard libraries (LiquidCrystal for Arduino, compatible Python libraries for Raspberry Pi) and the HD44780 instruction set to initialize and write text.

Why Choose This 16×2 LCD Module?

This module offers a dependable balance of readability, compatibility and power efficiency. Its HD44780 compatibility and standard pinout mean you can quickly add a display to prototypes and finished products without complex drivers. The green backlight enhances legibility while maintaining low energy usage.

Note: Images are for illustration purposes only. Actual module appearance and features may vary slightly by manufacturer.