UBlox NEO-6M GPS Module V2 with Antenna — Overview
The UBlox NEO-6M GPS Module V2 is a compact, reliable GPS receiver built around the u-blox NEO-6M chipset. It delivers accurate geographic positioning and fast satellite acquisition, making it ideal for navigation, tracking, robotics, drones, and IoT applications. The module includes a built-in antenna for quick setup and supports external antennas when signal conditions require improved reception.
Key Features
- High accuracy: Typical horizontal positioning accuracy of 2.5 meters.
- Fast acquisition: Cold start time under 35 seconds in open sky.
- Multi-constellation support: GPS, GLONASS, and Galileo for better coverage and reliability.
- Low power: Designed for battery-powered and portable applications.
- Compact form factor: Small dimensions (25 x 35 x 6.5 mm) fit into space-constrained designs.
- Easy integration: UART serial interface (TX, RX) for seamless connection to microcontrollers and SBCs.
Technical Specifications
- Chipset: u-blox NEO-6M
- Frequency: L1 band (1575.42 MHz)
- Position accuracy: Typically 2.5 meters
- Velocity accuracy: Typically 0.1 m/s
- Update rate: 1 Hz (configurable up to 5 Hz)
- Operating voltage: 3.3 V to 5 V DC
- Interface: UART serial (TX, RX)
- Dimensions: 25 mm x 35 mm x 6.5 mm
Typical Applications
- Autonomous vehicle and drone navigation
- Asset tracking and location-based services
- Outdoor sports, adventure equipment, and handheld devices
- IoT devices requiring geolocation
- Robotics, mapping, and surveying systems
Connectivity and Integration
The NEO-6M communicates via a standard UART serial interface, making it compatible with Arduino, Raspberry Pi and a wide range of microcontrollers. Typical wiring:
- VCC: 3.3 V to 5 V DC
- GND: Ground
- TX: GPS module transmit pin (connect to MCU RX)
- RX: GPS module receive pin (connect to MCU TX)
Default NMEA sentences are output at 1 Hz; you can configure the update rate, NMEA messages, and other parameters using u-blox configuration tools or via serial commands.
Setup Tips
- For fastest satellite lock, place the module in an open area with a clear view of the sky.
- If indoor reception is poor, use an external active antenna to improve signal strength.
- Keep TX/RX wiring short and avoid noisy power sources to reduce communication errors.
- Use level shifting if your microcontroller operates at lower voltage levels than the module.
Why Choose the UBlox NEO-6M GPS Module V2
This module balances performance, compact size, and ease of use. Its multi-constellation reception and reliable UART interface make it a go-to GPS solution for hobbyists and professionals building navigation, tracking, and location-aware applications.
Note: Images are for illustration purposes only. Actual product may vary.
There are no reviews yet.