- Batteries, Cells and Power Supply, Boards, Modules and Accessories
4x 18650 Cell Holder
– Holds four 18650 lithium-ion cells (batteries not included)
– Spring-loaded contacts for reliable electrical connection and vibration resistance
– Solder-free terminals for quick installation and removal
– Durable ABS/plastic construction for long service life
– Compact, space-saving design for portable electronics
– Flexible mounting: screw holes and adhesive backing optionsSKU: n/a - Batteries, Cells and Power Supply
Li-Ion 3.7V 18650 Battery Cell (2000mAh)
- Compact 18650 cylindrical cell (18×65 mm) with high energy density for extended runtime.
- Reliable 2000mAh nominal capacity and stable 3.7V output for consistent device performance.
- Long cycle life rated for hundreds of charge/discharge cycles for durable use.
- Built-in safety protections including overcharge, over-discharge, short-circuit and overheat safeguards.
- Low self-discharge for better storage retention and less maintenance charging.
- Lightweight and versatile – suitable for consumer electronics, power tools, EV packs and renewable storage.
SKU: n/a
4x 18650 Cell Holder
In stock
– Holds four 18650 lithium-ion cells (batteries not included)
– Spring-loaded contacts for reliable electrical connection and vibration resistance
– Solder-free terminals for quick installation and removal
– Durable ABS/plastic construction for long service life
– Compact, space-saving design for portable electronics
– Flexible mounting: screw holes and adhesive backing options
₨ 120 ₨ 150
In stock
4x 18650 Cell Holder – Secure, solder-free battery mounting
The 4x 18650 Cell Holder is a compact, reliable battery holder designed to carry and connect four 18650 lithium-ion cells for DIY builds, prototyping, and commercial devices. It simplifies battery pack assembly with solder-free terminals and spring-loaded contacts for consistent, vibration-resistant connections.
Key features
- Quad 18650 configuration: fits four 18650 cells in series or parallel arrangements
- Spring-loaded contacts for dependable electrical contact and improved vibration tolerance
- No soldering required: solder-free terminals and accessible output leads for fast setup
- Durable ABS or similar plastic housing for impact resistance and long life
- Compact footprint ideal for handheld and portable electronics
- Optional integrated on/off switch available on select models
- Versatile mounting: built-in screw holes and/or adhesive backing for flexible installation
Technical specifications
- Battery compatibility: 18650 lithium-ion cells (cells not included)
- Typical dimensions: approximately 75 mm x 75 mm x 20 mm (varies by model)
- Material: molded ABS or similar durable plastic
- Terminal types: spring-loaded contacts or screw terminals (model dependent)
- Output: positive and negative lead wires for external connections
- Mounting: screw holes and/or adhesive backing
Applications and typical use cases
- DIY electronics and maker projects: quickly assemble 4-cell battery packs without soldering
- Portable devices: power flashlights, chargers, handheld tools, and other battery-powered gadgets
- Prototyping and product development: use with breadboards and prototype power supplies
- Education and STEM kits: safe, reusable platform for teaching battery handling and basic circuits
- Emergency backup power: build portable power banks and emergency lighting solutions
Installation and wiring tips
- Verify battery orientation: align positive (+) and negative (-) markings on the holder and cells.
- Use quality 18650 cells: prefer protected or reputable-brand batteries for improved safety.
- Secure mounting: fasten the holder using the screw holes or adhesive backing to prevent movement.
- Connect external wiring to the output leads: use insulated wire and add strain relief where needed.
- For series configurations, use an appropriate balance charging method or a battery management system (BMS) to avoid cell imbalance.
Safety and handling
- Batteries not included. Handle lithium-ion cells with care; avoid short circuits, punctures, and exposure to extreme heat.
- Do not mix cell chemistries, capacities, or ages in the same holder.
- Use a suitable charger and, when assembling series packs, include a BMS if required for your application.
Why choose this 4x 18650 cell holder?
This 4x 18650 cell holder provides a low-cost, reusable platform for constructing multi-cell battery packs without soldering. With spring-loaded contacts, robust construction, and flexible mounting options, it speeds up assembly and improves durability for hobbyists, educators, and product designers.
Note: Product dimensions, mounting options, and features may vary slightly by model. Images are for illustration only.
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Vendor Information
- Store Name: College Road Electronics
- Vendor: College Road Electronics
-
Address:
Microwave Electronics, Basement Azhar Shaheed Plaza, DAV College Road
Rawalpindi
Punjab
46000 - 3.00 rating from 2 reviews
- Boards and Programmers
ESP32 WiFi + Bluetooth Module Type-C (30 Pin) (Pre-Soldered)
– ESP32-WROOM-32 module with Wi-Fi and Bluetooth (Classic & BLE)
– USB Type-C port for easy programming and power
– 30-pin layout with pre-soldered header pins (breadboard ready)
– Dual-core processor up to 240 MHz for responsive performance
– Integrated PWM, ADC, DAC, UART, SPI, I2C and I2S interfaces
– Compatible with Arduino IDE and MicroPython for fast development
– Ideal for IoT, robotics, automation, data logging and prototypingSKU: n/a - Boards, Modules and Accessories, Buck, Boost Converters and Regulators
Voltage Regulator Module LM2596 (Display Unit)
Boards, Modules and Accessories, Buck, Boost Converters and RegulatorsVoltage Regulator Module LM2596 (Display Unit)
– Step-down LM2596 voltage regulator module with built-in digital display
– Adjustable output voltage from 1.25V to 37V for flexible power control
– Wide 4V to 40V input compatibility (batteries, solar panels, DC supplies)
– High-efficiency switching design reduces heat and power loss
– Compact, durable module ideal for DIY, Arduino, and power systems
– Real-time voltage monitoring via onboard digital display for easy tuningSKU: n/a - Boards, Modules and Accessories, Motors, Drivers and Wheels
MOSFET Driver Module IRF520
- Compact MOSFET driver module using IRF520 for efficient power switching.
- Handles high-current loads up to 5-10A for DC motors, LEDs, and more.
- Wide voltage range: 5V to 24V for flexible project use.
- Low-side switching with PWM input for precise speed and brightness control.
- Easy integration with Arduino and Raspberry Pi for DIY electronics and robotics.
SKU: n/a - DIY School Kits
T-M292 Geosynchronous Satellite Model DIY Learning Kit
– Build a functional geosynchronous satellite model to visualize orbital motion
– Motorized rotation system simulates satellite synchronization with Earth
– Battery powered for safe, portable classroom demonstrations
– Pre-cut, color-coded parts for easy assembly (45–75 minutes)
– Teaches orbital mechanics, physics, and STEM engineering principles
– Ideal for students, science fairs, and hands-on STEM workshopsSKU: n/a - Tech Tools and Instruments
Digital Multimeter with Probes (DT830D)
– Compact 3.5-digit digital multimeter (DT830D) with clear LCD display
– Measures DC voltage up to 1000V and AC voltage up to 750V
– Measures DC current up to 10A and resistance up to 2 MΩ
– Diode and transistor testing plus continuity buzzer for quick checks
– Rotary dial and included test probes for safe, accurate measurements
– Lightweight, durable, and portable ideal for hobbyists, students, and techniciansSKU: n/a - Integrated Circuits (ICs)
74145 BCD to Decimal Decoder/Driver IC (DIP)
– Converts 4-bit BCD input into one active low output among ten lines
– Standard 24-pin DIP package for easy prototyping
– Active LOW outputs capable of sinking current to drive LEDs and lamps
– TTL-compatible logic for wide digital circuit integration
– Ideal for displays, keypad decoding, relay or LED control
– Popular choice for students, hobbyists, and engineersSKU: n/a














There are no reviews yet.