30A Solar Charge Controller

The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.

Specifications:

• Brand: Kingway

• Rated Voltage: 12V / 24V ( Auto Switch )

• Rated Current: 30A

• Max Input Solar Panel Power: 720W 

• Open Voltage of Solar Panel: ≤ 50V

• Over-charging Protection: 13.8V / ( 27.6V )

• Low Voltage Disconnection / LVD: 10.7V / ( 21.4V )

• Low Voltage Reconnected / LVR: 12.5 V / ( 25V )

• No Load Loss: ≤ 30mA

• Loop Voltage Drop: ≤170mV

• Charging Mode: PWM mode

• Humidity Requirements: ≤ 90%

• Temperature Compensation: -4mV / Cell / °C

• Installation Cable area: ≤ 7# AWG (16 mm⊃2; )

• Operating Temperature: -10-60 degree Centigrade

• Storage Temperature: -30-70 degree Centigrade 

• Connect 24V Battery ( Connect 12V Battery, Max solar Panel Power: 360W )

Features:

• Image of LCD graphic symbol

• Simple button operation

• Automatic Identification System Voltage level

• Intelligent PWM charge mode

• Automatic Temperature Compensation

• Adjustable charge-discharge control parameters

• Settable Operating mode of Load

• Overload, Short Circuit Protection

• Remote monitoring and control function (custom)

• Battery reverse-discharge protection

• Battery Low Voltage Disconnection (LVD)

• Battery reverse connection protection

• Accumulated function of charge and discharge Ampere hours

Installation:

• Ready tools and cables. Encourage you to matching the right cables. Ensure that the current density<4mm2 that is conductive to reducing the line voltage drop. Recommended: 60A with 20mm2 cable. Check weather the installation sitescompliance with the relevant safety requirements. Please avoid the damp, dusty, there is a place flammable, explosive and corrosive gases use the controller to install.

• Install the controller into a fixed vertical plane. See section 5 of the pore size and pore spacing. In order to ensure a good thermal control conditions, please set aside each 10cm below the controller space.

• As shown on the right, connect the (1) Load, (2) Battery and (3) Solar Panel to the controller according to the order of (1) (2) (3). Pay attention to the load, battery, solar panel and controller of same polarity.

• Put into the external temperature sensor on the left of the controller (probe port). The temperature sensor should be similar space with battery. (Otherwise, the controller will control the parameters of all wrong temperature compensation).

• If you have remote monitoring and control function, please insert one end of the included communication wire on the right of the controller (communication port), the other end to connect to The host computer.

Package Include:

• 1 x 30A CM3024Z Solar Charge Controller