Student Corner
-
Boards and Programmer, Students Corner
Arduino Uno R3 Plus with USB Cable in Pakistan
The UNO is an FOR Arduino compatible board. It is based on FOR Arduino UNO Rev3 design. Some visible improvement on hardware make more flexible and easier to use. SPI, COM and IIC bus breakout make bus connect easier. The FOR Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
The Uno R3 also adds SDA and SCL pins next to the AREF. In addition, there are two new pins placed near the RESET pin. One is the IOREF that allow the shields to adapt to the voltage provided from the board. The other is a not connected and is reserved for future purposes. The Uno R3 works with all existing shields but can adapt to new shields which use these additional pins.for Arduino is an open-source physical computing platform based on a simple i/o board and a development environment that implements the Processing/Wiring language. for Arduino can be used to develop stand-alone interactive objects or can be connected to software on your computer (e.g. Flash, Processing, MaxMSP).The open-source IDE can be downloaded for free (currently for OS X, Windows, and Linux).
Arduino Uno R3 Plus Features:
- SPI, COM and IIC bus breakout make bus connect easier.
- The Uno R3 plus also adds SDA and SCL pins next to the AREF.
- The UNO R3 Plus is based on for Arduino UNO Rev3 design, it is fully compatible with Arduino.
- The Uno R3 plus works with all existing shields but can adapt to new shields which use these additional pins.
- It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
- It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
Package Include:
- 1 x Arduino Uno R3 Plus with USB Cable
Best Online Shopping Website for Arduino Uno R3 Plus with USB Cable in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.SKU: n/a -
Sensor And Modules, Students Corner
STM32F103C8T6 ARM Development Board Module
This is a core chip based on for CS32F103C8T6 ARM core board, features are as follows:1, the board based on the most basic MCU circuit, 8M and 32768 crystal circuit, USB power supply circuit.2, the core board is divided into two rows leads to all the I / O port.3, with SWD simulation debug download interface, simple and convenient, debugging speed.4, the use of the Mirco USB interface, you can do USB communication and power supply, USB interface, compatible with the ordinary Andrews mobile phone charger interface.6, RTC crystal Epson brand, easy to start, more stable.7, with double pin, but the pin does not default welding, the user according to their own application scenarios to choose their own welding direction. If welding is required, please tell the owner.Keil can be used to compile, IAR compiler, can be downloaded through the J-Link or USART1 procedures, the procedures are the owner and debugging procedures, there are problems can consult the owner.Chip Description:
1, 32F103C8T6Package Type: LQFP;Number of pins: 48;Kernel: Cortex-M3;Operating frequency: 72MHz;Storage resources: 64K Byte Flash, 20KByte SRAM;Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)Timers: 3 general timers and 1 advanced timerDebug Download: Support JTAG / SWD debug interface to download, support for IAP.2, RT9193: 3.3V regulator chip, the maximum output of 300mA.Interface description:
1, SWD interface: support for simulation, download and debug.2, Mirco USB interface: power supply and USB communication, does not support the download.3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals.5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatmentOther Device Description:
1, Power LED (PWR): Power indicator status, can determine whether the power supply is stable.2, the user LED (PC13): to facilitate the I / O output test or indicate the program running.3, start jumping choose programming mode: (1, the user flash memory 2, SRAM 3, system memory).4, reset button: reset chip for the user program.5, 8M Crystal: The frequency can be set to make the system clocked at 72MHz.6,32.768KHz Crystal: Available for built-in RTC, or for calibration.SKU: n/a -
Motor and Robotics, Students Corner
Monster Shield 15A VNH2SP30
Description
This VNH2SP30 Monster Moto Driver Shield has NH3SP30 chip which enables it to drive one DC motor. It has an extremely high current capacity of 14A per channel (peak of 30A for few seconds). The thermal heating is minimal uptill 4 to 5 amps. However it would need thermal dissipation device like heat sink or cooling fan for higher currents.
Also the difference in the standard Arduino Motor shield and Monster Motor shield is the change in the driving IC. In the standard Arduino Motor shield the IC used is L298 H bridge IC which has a current capacity of 1 A which is replaced by the VNH3DP30 chip with a 14A conitnuous current capacity with heat dissipation devices installed. This motor driver also has a thermal shutdown function possible as the thermal output is provided on the analog pin of arduino.
Features:
- Capable to drive two DC motors or one stepper motor
- Continuous current capacity 14 A
- Peak Current capacity 30 A
- Thermal Shutdown pin configured to provide output to Arduino Analog Pin
- Maximum Voltage is 16V
- Maximum PWM frequency is 30 Khz. For most of our Hi Torque DC motors 12 V, 10 khz PWM is recommended
Package Includes:
-
1 x VNH2SP30 DC Motor Driver Monster Moto Shield
SKU: n/a -
Sensor And Modules, Students Corner
TDK-0302 PID Temperature And Humidity Controller
Description
Digital Temperature Humidity Controller is used for high-precision temperature sensors. Humidity Controller for the incubator is famous for accuracy and good performance. it has simple panel control and a wide temperature range. it is also simple in design and high mechanical strength.
Features:
Way condensation, all the way to the real digital precision temperature control. Buttons to set the control value, the automatic control of the respective load to regulate the ambient temperature and humidity
Specification:
- Power supply voltage:AC220V, 50-60HZ
- Control output:5A,250VAC(Resistive load)
- Display:LEDShow
- Set temperature:-55~125
- Setting Humidity:0~99.9% RH
- Setting Backlash: Temperature~9.99
- Humidity~9.99% RH
- Accuracy: Temperature 0.5
- Humidity 4.5% RH
- Control: the upper and lower limits
- Ambient temperature:-10 To70
- Humidity:Forty fiveTo85% RH
- Mechanical life: Minimum3000,000Secondary
- Volume:72 × 72 × 112mm3
- Fourth, the installation: Panel, hole size67.5 × 67.5mm2
Package Includes:
1 x TDK-0302 Temperature and Humidity Controller
Industryparts. pk is the Best Online Shopping website for TDK-0302 Temperature and Humidity controllers. Here you get TDK-0302 Temperature and Humidity Controller at a reasonable price in Karachi, Lahore, Islamabad, Rawalpindi, Peshawar, Quetta, Multan, and all over Pakistan.
SKU: n/a -
Electronic Components, Students Corner
IC base 14 pin
Description
14 Pin IC Socket base adaptor is a 14 pin IC holder, which can be soldered directly onto the PCB. The IC can be removed from this socket when required. The IC is placed on the socket at the time of use. This base acts as a removable IC holder.
The socket is used when the IC is temperature sensitive and the heat from the soldering iron can damage the IC. This socket is used when working with a microcontroller IC and can be removed for programming.
Features:
- 14 pins.
- JDEC compliant.
- Molded notch for proper orientation.
- Easy to insert and remove ICs.
Package Includes:
- 1 x 14 Pin DIP IC Socket Base Adaptor
SKU: n/a -
Boards and Programmer, Students Corner
LCD 16*4 with Green back light
Description
16×4 Character LCD Module is a dot-matrix liquid crystal display module specially used for displaying letters, numbers, symbols, etc. 16*4 LCD Display can display 4 lines with 16 characters in each line. Divided into 4-bit and 8-bit data transmission methods. 1604 Green Character LCD provides rich command settings: clear display; cursor return to origin; display on/off; cursor on/off; display character flashes; cursor shift; display shift, etc.
Features And Specifications Of 1604 16×4 Character LCD Display Module:
- Connection Pin Header
- Display Format 16×4 Character
- Outline Dimension 87.0(W)x60.0(H)x12.5(T)mm
- Interface 6800 4-bit Parallel, 6800 8-bit Parallel
- Viewing Direction 6:00
- Backlight Color Green
- Backlight Current (Typ) 45mA
- Power Supply(Typ) 3.5V / 5.0V
- Supply Current for LCM(Max) 1800uA
- Operating Temp -20℃~70℃
- Storage Temperature -30℃~80℃
Package Include:
-
1 x LCD1604 16×4 Character LCD Display Module LCM Blue Blacklight 5V for Arduino
Best online shopping website for 16X4 Characters Green LCD Module 1604 Display FDCC1604 Series For Arduino Raspberry Pi at cheap price in Lahore, Islamabad, Karachi, Faislabad, Multan, Quetta, Sukkur, Peshawar, Rawalpindi, and all over Pakistan
SKU: n/a -
Sensor And Modules, Students Corner
BF350-3AA Strain Gauge Resistive Pressure Sensor
A resistive strain gauge sensor with a 350 ohm nominal resistance which varies when a force is applied. By measuring the change in the sensors resistance a measurement of the force applied to it can be obtained. Note that strain gauges exhibit small changes in resistance and so this sensor should be used in a Wheatstone bridge configuration. If using with a microcontroller such as an Arduino we also recommend using our HX711 digital bridge sensor interface module.
Features:
- Nominal resistance(Ohm): 350
- Tolerance: <±0.1%
- Gauge factor: 2.00~2.20
- Gauge factor resistance: <±1%
- Strain limit: 2.0%
- Fatigue life: >10
- Metal foil: constantan alloy
- Working temperature range: -30~+80℃
- Temperature compensation: Aluminium(23)
- Gauge Grid(mm) Dimensions(L×M): 3.2 x 3.06
- Gauge Creep Code: M6 to O6
Application
SKU: n/a -
Electronic Components, Students Corner
74HC595 Shift Register
- 8-bit, Serial In – Parallel Out Shift register
- Operating Voltage: 2V to 6V
- Power Consumption: 80uA
- Output source/sink current: 35mA
- Output Voltage is equal to Operating voltage
- Minimum high-level Input Voltage: 3.15V @(Vcc=4.5V)
- Maximum low-level Input Voltage: 1.35V @(Vcc=4.5V)
- Can be easily cascaded with more IC to get more outputs
- Maximum Clock Frequency: 25Mhz @4.5V
- Available in 16-pin PDIP, GDIP, PDSO packages
SKU: n/a -
Electronic Components, Students Corner
Regulator 7805 7812 7815
Voltage regulators are very common in electronic circuits.
They provide a constant output voltage for a varied input voltage.
The 78XX IC is an iconic regulator IC that finds its application in most of the projects. The name 78XX signifies two meaning, “78” means that it is a positive voltage regulator and “XX” means that it provides 5/6/9/12/15/24V as outputSKU: n/a -
Boards and Programmer, Students Corner
Flight Controller Board
The next evolution of the rotor revolution is here!! The KK2.1.5 is packing new found power with updated sensors, memory and header pins.
The KK2.1.5 is next big evolution of the first generation KK flight control boards. The KK2.1.5 was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts. The LCD screen and built in software makes install and setup easier than ever. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!
The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK2.1.5 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.
The KK2.1.5 added polarity protection to the voltage sense header and a fuse protected buzzer outputs, in case something is accidentally plugged in incorrectly. The voltage sense line has been updated for better accuracy. The board is clearly labeled and the voltage sense line color has been changed to red for easy identification, making installation and connections a snap.
If you’re new to multi-rotor flight or have been unsure about how to setup a KK board then the KK2.1.5 was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.
Specs:
Size: 50.5mm x 50.5mm x 12mm
Weight: 21 gram (Inc Piezo buzzer)
IC: Atmega644 PA
Gyro/Acc: 6050MPU InvenSense Inc.
Auto-level: Yes
Input Voltage: 4.8-6.0V
AVR interface: standard 6 pin.
Signal from Receiver: 1520us (5 channels)
Signal to ESC: 1520us
Firmware Version: 1.6:
Pre-installed firmware.
Dualcopter
Tricopter
Y6
Quadcopter +
Quadcopter X
Hexcopter +
Hexcopter X
Octocopter +
Octocopter X
X8 +
X8 X
H8
H6
V8
V6
Aero 1S Aileron
Aero 2S Aileron
Flying Wing
Singlecopter 2M 2S
Singlecopter 1M 4S(Custom Mix via the “Mixer Editor” option)
The Mixer Editor allows you to adjust where and how much signal the motors receive from stick input and sensors. This allows you to create any configuration possible with up to 8 motors or servos.What is a Multi-Rotor Control board you ask?
The HobbyKing KK2.1.5 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.
The HobbyKing KK2.1.5 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).SKU: n/a -
Battery & Cells, Students Corner
LONG 6V 7Ah Battery
Long lead-acid batteries are characterized by very high quality, reliability and long service life. Of course, safety features such as overload or overload protection. They are completely maintenance-free.Accumulators must always be stored and maintained in a fully charged state, otherwise the so- sulfation of the electrodes leading to a rapid reduction in capacity.
For Details Download: https://w11stop.com/files/Long/long-lead-acid-battery-6v-7ah.pdf
Specifications:
- Body Color: Black
- Nominal Voltage: 6V
- Weight: Approx 1.2Kg
- Internal Resistance: 12mΩ
- Case Material: ABS UL94 HB
- Charging Voltage: 7.20V – 7.50V
- Maximum Charging Current: 2.1A
- Float Charging Voltage: 6.75V – 6.90V
Caution
- Do not Incinerate.
- Do not Short the Battery Terminals.
- Do not Charge in a Gas Tight Container.
- Flush with Water at once if contact is made with electrolyte.
Package Include:
- 1 x LONG 6V 7Ah Battery
SKU: n/a
ColgRoad Top Selling
25W Submersible Water Pump
Specifications:
Attention:
Package Include:
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Heating Lamp Black Infrared Ceramic Emitter for Pet Brooder Reptile Lamp 25W 50W 75W 100W 150W 200W
Sweet Tips:
In order to protect and extend the service life of the lamp, it is recommended to work within 2 hours each time.
Due to the difference of lights and displays, the color of the product may be different. In view of the different production batches, the color of the product may be slightly different, but it will not affect the normal use of the ceramic lamp. Please make sure you don’t mind Before you bidding!
Product Name: Ceramic Heater Lamp
Base Type: E27
Power: 25W/50W /75W /100W/150W/200W
Voltage: 220V-230v
Material: Ceramic
Colour: Black/Beige
Size: As picture
Features:
1.It features good heating property, but does not give out the stimulus light which will affect the pets to sleep .
2.Resistant to impact, can be exposed to water, can be heated for a long time.
3. Giving out far-infrared can not only keep the pets warm, but also has health care function.
Note:
1.The heater can only provide heat, no light.the surface is hot, do not touch it directly during use. If need to check the heater, please cut off the power first.
2.Ceramic lamp size is manually measured, please allow small deviations.
Package includes: 1 x ceramic reptiles heater
12V 8W Shafi Solar Water Pump in Pakistan
DC 12V Solar Water Pump Specifications:
DC 12V Solar Water Pump Features:
Package Include:
Best Online Shopping Website for 12V Solar Water Pump in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan.
IP66 100W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
|
Optical Parameters of High power LED Floodlight 100W |
|
|
Model |
ZL-TGD-100W |
|
Power |
100W |
|
LED chip |
Epistar /Bridgelux LED chip |
|
Brightness |
90lm/W |
|
Color Temperature |
2700-6500k |
|
Warm White: 2700-3200k |
|
|
Neutral White/Nature white 4000-4500K |
|
|
Day White: 5000-5500K |
|
|
Cool White, Cold White > 6500K |
|
|
CRI |
>80 |
|
Beam Angle |
120 degree |
|
Physical parameters of LED floodlight 100W |
|
|
Housing Material |
Aluminum Alloy |
|
Protection Rating |
IP65 / IP66 |
|
Current |
320 mA |
|
Voltage |
AC 85-265V |
|
Frequency |
50/60 HZ |
|
LED driver |
Excellent isolated constant current driver |
|
Long Life |
50,000h only Led |
|
Power Efficiency |
85% |
Features:
Package Include:
VOYE V012A Wireless Door Bell
The doorbell button
contains a built-in radio transmitter powered by a battery. When the button is
pushed, the transmitter sends a radio signal to the receiver unit, which is plugged into a wall
outlet inside the building. When the radio signal is detected by the receiver, it activates a sound chip that plays the
sound of gongs through a loudspeaker either a two-note
“ding-dong” sound or a longer chime sequence. Frequencies in the 2.4 GHz ISM band are usually used. To avoid interference
by nearby wireless doorbells on the same radio frequency, the units can usually be set by the owner to
different radio channels.
Specifications:
10.8×6.7×3.3cm
indicator of the transmitter is on, the transmitter works, and the
receiver receives the command and sends
Package Include:
V012A Wireless Door Bell
LC-16-Ⅱ LED Soft Ring Light
The LC-16 II ring lamp is a trendy tool for anyone working with light. It doesn’t matter who you are: blogger, professional photographer, or makeup artist. If the result of your work depends on the quality of lighting, do not skimp on the lamp! Ring light is the simplest and most correct solution for indoor and outdoor use at any time of the day or night.
Appearance:
The LC-16 II ring lamp with a diameter of 38 centimeters in a minimalist design does not annoy the visual, harmoniously complements the design of the workshop, photo studio, living room and even bedroom. There is nothing superfluous in it, and the correct geometry and adjustable tripod will satisfy even incorrigible perfectionists.
Functional:
The most important thing about the LC-16 II LED lamp is light. Warm, cold and natural – only 3 modes. Bright LEDs are responsible for flicker-free luminous flux stability and economical power consumption. Controlling light intensity and modes is easy with a dimmer switch. The lamp works from the network, changes the angle of inclination by 180 degrees, is compatible with the main models of smartphones and cameras (a special holder is used).
Who Suits:
Makeup artists visiting a client without an LED ring lamp are like a photographer without a camera. Adjustable light will help you stay autonomous, regardless of the weather, the level of lighting indoors or outdoors, and most importantly – to do the job perfectly.
Experienced photographers and videographers or beginners with a ring lamp will forget about photo and video defective due to lack of light! A convenient ring lamp on a tripod with a diameter of 38 cm will save the situation, help you achieve the super effect of those very shining eyes in the photo!
Brows, manicurists, tattoo artists, beauticians and anyone who needs uniform, stable lighting will appreciate the convenience of working with the lamp. The included mirror is a nice bonus.
Specifications:
Features:
Package Include:
180W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
|
Model |
|
LT95180 |
|
|
Power |
|
180w |
|
|
Light source |
|
900 patches 5730 lamp beads |
|
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
|
Luminous flux |
|
1700lm |
|
|
Install Height |
|
5-6M |
|
|
Lamp Dimension |
760*290*90mm |
|
|
|
Battery |
|
3.2V 24AH |
|
|
Solar Panel Power |
|
6V 24W |
|
|
Finished Color |
Black |
||
|
Material |
Die-casting Aluminum |
||
|
Color rendering index |
Ra>80 |
||
|
Rated life |
50000h |
||
|
IP Rating |
IP65 |
||
|
Working temperature |
-20~+60°C |
||
|
Charging |
6-8h Hours |
||
|
Control system |
Light sense + human body induction + remote control |
||
|
Application |
Highway, courtyard, road, outdoor, etc. |
||
|
Battery Type |
LiFePO4 Battery |
||
Advantages:
Package Include:
LED Room Strobe 12
Specifications:
Features:
Package Include:
LED Bulb Raw Material
Specifications:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy.No fluorescent flickering.No hazard of mercury or lead entering the environment.Low power consumption, high intensity, low lumen attenuation.Recessed mounted, maintenance free, easy installation.Solid- state, high shock/ vibration resistant.Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
|
Optical Parameters of High power LED Floodlight 50W |
|
|
Model |
ZL-TGD-50W |
|
Power |
50W |
|
LED chip |
Epistar /Bridgelux LED chip |
|
Lumens |
4800 lm |
|
Color Temperature |
2700-6500k |
|
Warm White: 2700-3200k |
|
|
Neutral White/Nature white 4000-4500K |
|
|
Day White: 5000-5500K |
|
|
Cool White, Cold White > 6500K |
|
|
CRI |
>80 |
|
Beam Angle |
120 degree |
|
Physical parameters of LED floodlight 50W |
|
|
Housing Material |
Aluminum Alloy |
|
Surface Treatment |
Oxidation Treatment, Silver Treatment |
|
Current |
320 mA |
|
Voltage |
AC 85-265V |
|
Frequency |
50/60 HZ |
|
LED driver |
Excellent isolated constant current driver |
|
Power Factor |
0.90 |
|
Power Efficiency |
85% |
Features:
Package Include:
5M 12V LED Strip NEON Flexible Lights in Pakistan
12V Neon Flexible Strip Light IP65 Rating Size 16*12 5M Length Lamp Material Silica Gel
12V Neon Flexible Strip Lights Specifications:
12V Neon Flexible Strip Lights Features:
Package Include:
1 x 5M 12V LED Strip NEON Flexible Lights
Best Online Shopping Website for 5M 12V LED Strip NEON Flexible Lights Decoration Lights in cheap price in Islamabad, Karachi, Rawalpindi, Peshawar, Multan, Faisalabad, Quetta, and all over Pakistan
60W Solar Street Light
Solar street lights are raised light sources which are powered by solar panels generally mounted on the lighting structure or integrated into the pole itself. The solar panels charge a rechargeable battery, which powers a fluorescent or LED lamp during the night.
Specifications:
|
Model |
|
LT95060 |
|
|
Power |
|
60w |
|
|
Light source |
|
300 patches 5730 lamp beads |
|
|
Solar Panel Type |
|
Polycrystalline Silicon |
|
|
Luminous flux |
|
800lm |
|
|
Install Height |
|
5-6M |
|
|
Lamp Dimension |
|
530*240*90mm |
|
|
Battery |
|
3.2V 12AH |
|
|
Solar Panel Power |
|
6V 12W |
|
|
Finished Color |
Black |
||
|
Material |
Die-casting Aluminum |
||
|
Color rendering index |
Ra>80 |
||
|
Rated life |
50000h |
||
|
IP Rating |
IP65 |
||
|
Working temperature |
-20~+60°C |
||
|
Charging |
6-8h Hours |
||
|
Control system |
Light sense + human body induction + remote control |
||
|
Application |
Highway, courtyard, road, outdoor, etc. |
||
|
Battery Type |
LiFePO4 Battery |
||
Advantages:
Package Include:
12V Diesel Transfer Pump
This DC transfer pump is for fueling diesel, kerosene, not for gasoline. It used to fill or empty engines, tanks and all kinds of machinery, tractor and farm equipment.
Specifications:
Main Stem: Cast Iron
Voltage Input: DC12V
Weight: 8lbs
Inlet/ Outlet Port Fitting: 3/4
Rated Power:175w
Rate Current: 13A
Max Flow: 40L/minute
No-Load: 4500RPM
used For: Diesel Biodiesel Kerosene Only (not For Gasoline Or Solvents)
Max Suction Distance:5m
Head:10m
Pump Size: 8-1/4″L X 5-3/4″H X 7″ W( Measure With Two Brass Couplers)
Base Size: 3-1/2″ X 4-1/4″
Power Corded 6ft Aprox
Features:
Package Include:
50W LED Outdoor Light
50W LED Outdoor Light is the best use LED light for your daily routine.Has different features like no shadow, 80% energy-saving and environment-friendly, standard thick aluminium and tempered glass, IP66 waterproof etc. You can use this led light where you want to brighten with best energy-saving like your outdoor areas, landscape lighting, stage fountain cast light, building lighting, billboard lighting, hotels, bars, dance halls and other places of entertainment lighting and decoration.
Specifications:
Features:
Applications:
Attentions:
Package Include:
IP66 50W LED Flood Light
High efficiency and energy-saving compared to conventional fluorescent which are equal bright, and consumes 70-80% less energy. No fluorescent flickering. No hazard of mercury or lead entering the environment. Low power consumption, high intensity, low lumen attenuation. Recessed mounted, maintenance free, easy installation. Solid- state, high shock/ vibration resistant. Adopting low- pressure constant current power supply, no glare, it indeed achieves soft luminescence, stabilization, continuity, and approximate natural light, which is a perfect light source.
Specifications:
|
Optical Parameters of High power LED Floodlight 50W |
|
|
Model |
ZL-TGD-50W |
|
Power |
50W |
|
LED chip |
Epistar /Bridgelux LED chip |
|
Brightness |
90lm/W |
|
Color Temperature |
2700-6500k |
|
Warm White: 2700-3200k |
|
|
Neutral White/Nature white 4000-4500K |
|
|
Day White: 5000-5500K |
|
|
Cool White, Cold White > 6500K |
|
|
CRI |
>80 |
|
Beam Angle |
120 degree |
|
Physical parameters of LED floodlight 50W |
|
|
Housing Material |
Aluminum Alloy |
|
Protection Rating |
IP65 / IP66 |
|
Current |
320 mA |
|
Voltage |
AC 85-265V |
|
Frequency |
50/60 HZ |
|
LED driver |
Excellent isolated constant current driver |
|
Long Life |
50,000h only Led |
|
Power Efficiency |
85% |
Features:
Package Include:
IP66 30W LED Flood Light
High efficiency and energy-saving compared to
conventional fluorescent which are equal bright, and consumes 70-80% less
energy. No fluorescent flickering. No hazard of mercury or lead entering the
environment. Low power consumption, high intensity, low lumen attenuation.
Recessed mounted, maintenance free, easy installation. Solid- state, high
shock/ vibration resistant. Adopting low- pressure constant current power
supply, no glare, it indeed achieves soft luminescence, stabilization,
continuity, and approximate natural light, which is a perfect light source.
Specifications:
|
Optical Parameters of High power LED Floodlight 30W |
|
|
Model |
ZL-TGD-30W |
|
Power |
30W |
|
LED chip |
Epistar /Bridgelux LED chip |
|
Brightness |
90lm/W |
|
Color Temperature |
2700-6500k |
|
Warm White: 2700-3200k |
|
|
Neutral White/Nature white 4000-4500K |
|
|
Day White: 5000-5500K |
|
|
Cool White, Cold White > 6500K |
|
|
CRI |
>80 |
|
Beam Angle |
120 degree |
|
Physical parameters of LED floodlight 30W |
|
|
Housing Material |
Aluminum Alloy |
|
Protection Rating |
IP65 / IP66 |
|
Current |
320 mA |
|
Voltage |
AC 85-265V |
|
Frequency |
50/60 HZ |
|
LED driver |
Excellent isolated constant current driver |
|
Long Life |
50,000h only Led |
|
Power Efficiency |
85% |
Features:
Package Include:
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
Thermoelectric Cooler Peltier Module TEC1-12715 12VDC 15A Cooling Refrigeration Plate
The TEC1-12715 40x40mm Thermoelectric Cooler 15A Peltier Module is the simple application of the Peltier Thermoelectric Effect. A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying the DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. Therefore, they can be used to either warm something up or cool something down, depending on which side you use. You can also take advantage of a temperature differential to generate electricity. This Heat Sink Thermoelectric Cooler Peltier works very well as long as you remove the heat from the hot side. After turning on the device, the hot side will heat quickly, the cold side will cool quickly. If you do not remove the heat from the hot side (with a heat sink or other device), the Peltier will quickly reach stasis and do nothing. We recommend using an old computer CPU heatsink or another water block of metal to pull heat from the hot side. We were able to use a computer power supply and CPU heatsink to make the cold side so uncomfortable we could not hold our finger to it. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on
Features Of TEC1-12705 Thermoelectric Cooler Heat Sink Cooling Peltier 12 Volt:
Specifications Of 40x40mm Thermoelectric Cooler Peltier Refrigeration Plate Module:
Important Note!! Heat side requires heat sink all the time. “ Do not run this device with a power supply more than a few seconds without a heatsink mounted to the device! ”
12V Car Washer Pump
Specifications:
Package Include:
56 eggs incubator Fully automatic with one rolling tray Best Quality
56 eggs incubator Fully automatic with one rolling tray Best Quality
*48/56 eggs incubator * Fully automatic * one rolling trays * Best Quality
DC: 12V – AC 220V
® 1 month Parts warranty
® Location is Rawalpindi
® Advance payment only
© Cargo available throughout Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
XH-W3001 220V 10A Digital Temperature Thermostat in Pakistan
This is an XH-W3001 XHW3001 220V 10A Digital Thermostat Switch. A temperature measurement and Controller tool with high accuracy and precision at a very low cost. XHW3001 Thermostat offers high-temperature control precision of 0.1℃. The Temperature controller range from -50℃ to 110℃.Digital Heat Controller features a 1M probe made up of stainless steel material which makes it waterproof and does not let it rust easily. Also, all the delicate and sensitive components are kept safe in ABS flame retardant housing which is avirulent and environmental protective.
XHW3001 Digital Temperature Controller Specifications:
XHW3001 Digital Temperature Controller Features:
Package Include:
30A Solar Charge Controller
The ‘CM’ series charge controller is an intelligent, multi-purpose solar
charge and discharge controller. The CM series includes an easy to read
LCD display and user friendly operation; various control parameters can be set
to meet your applications requirements. The 30 Amp CM3024 allows a maximum
solar input of 360W @ 12V & 7200W @ 24V. The charge controller powers off
the battery and should be connected to the battery before connecting to the
solar panel. We recommend that you follow the user manual prior to installing
the controller to your solar system.
Specifications:
Features:
Installation:
Package Include:
SUOER DC12V to AC230V 3000 WATT Inverter
This home inverter is extraordinarily designed for home use,which can convert DC 12V/24V of portable power supply to AC 110V/220V/230V and it works for almost all the household electrical resistive appliances such as MP3/MP4 player,cell phone, laptop, emergency light, electric blanket, electric shaver, electric cooker,digital camera, digital video,CD/DVD player,XBOX/PS4 game player, ordinary electric lamps, bulb,fluorescent light, rice cooker,electric iron,desktop computer, graphoscope,fax machines, printers, LCD TV, electric fans, cell phone chargers, electric iron , drinking fountain,hair dryer and so on.(Note:Only pure sine wave inverter can run sensitive electric appliances that are including Refrigerator, Washing Machine , Microwave oven, induction cooker , Air conditioner , electric drill, compressor, mercury lamp, sodium lamp and so on).
Specifications:
Features:
Package Include:
Arduino Intelligent Solar Tracking Equipment
Arduino Intelligent Solar Tracking Equipment
Shipping List:
1. Frame + servo + accessories, including frame part, 2 servos, 4 photosensitive modules, 1 solar panel + voltmeter, screws, etc.
2. Full set robot= Frame + steering gear + accessories + Arduino control board and shield board The product is unassembled.
3. Frame: including frame + screws, does not include accessories such as steering gear, solar panels.
The project,Using the photosensitive module to calculate the position of light,Adjust the steering gear and aim the solar panel at the direction with the most abundant light.notes,This project is for demonstration,Solar panels don’t provide enough energy to support itArduinoPower required
Program and information download link:
1. https://create.arduino.cc/editor/wjd76/e225717a-ae15-4282-98bd-f9cf09400bee/preview
2. https://github.com/shihaipeng03/Sunflower
Canadian solar panel 445W in Pakistan
OVERVIEW:
Explore colgroad.com, Get the latest Canadian Solar Panels & other solar panels at a discounted price in Pakistan with cash on delivery service across Pakistan. We provide Canadian Solar Panels at official prices from distributors and dealers in Pakistan.
More Power:
More Reliable:
CS3024Z 12V / 24V 30A PWM Solar Charge Controller in Pakistan
CS3024Z 12V / 24V 30A PWM Solar Charge Controller One of the most modern PWM regulators. Created for professional applications, but also maintaining the aesthetics of home appliances. The advanced technology used allows for optimal energy management of charging and discharging the batteries.The controller is equipped with a clear display showing the device’s operating parameters (voltage, current, temperature, etc.) and two USB ports for charging portable devices. The cable clamps enable the connection of cables with a cross-section of up to 10mm2.
Specifications:
Features:
1.2. Night / day mode symbol. If the voltage on the panel increases, it will switch to day mode
3, 4, 5. The symbol indicates the displayed parameter (panel voltage, battery voltage, temperature)
6. Battery rated voltage setting detected
7. Digital value
8. Clock function
9. On / off operation indication (charging / not charging)
10. Displayed unit
11. Error signaling
12. State of the powered output on / off (on / off)
13. Signaling the direction of energy transmission
14. Battery charge indicator
15. Battery charging indication
Regulator operation modes:
Charging: the basic task of the regulator to work with the PWM function and protection of the battery against overcharging.
Dusk sensor: the controller will automatically turn on the lighting at dusk and turn it off at dawn.
Dusk sensor + clock: the regulator’s clock can be programmed to work from dusk for a selected number of hours. It will turn off powered loads at dawn or after an out-of-program time, whichever comes first.
Manual mode: enables manual activation / deactivation of receivers.
Powering the receivers via the USB port: The USB outputs available on the front panel enable the supply of receivers adapted to 5V.
Package Include:
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Solar Charge Controller-12V/24V auto-Solar Panel Battery Regulator
Fashionable and practicable design.
High quality and durable.
Nice shape and unique style.
Light weight and portable.
LCD display working status.
simple button operation.
Multi-function to choise.
PWM control mode.
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
2KVA UPS 1800W 24VDC 230VAC Smart Personal Power Station Plus in Pakistan
Smart Personal Power Station Plus is a DC-to-AC inverter with auto line-to-battery transfer and integrated charging system, serving as an extended run UPS, a standalone power source or an automotive inverter.Smart Personal Power Station Plus supplier power from AC power and DC source. When AC cable is connected to a wall socket, utility power goes to connected equipment(s) and /or charges the battery set via charging system. In battery mode, Smart Plus automatically converts battery energy into AC power for backing up the connected devices.
Specifications:
Features:
Note:
Package Include: