FT232 FTDI-232 USB to TTL Serial Adapter Module

FT232 FTDI-232 USB to TTL Serial Adapter Module

The FT232 USB to TTL Adapter is a compact, high-performance module that provides reliable USB-to-serial conversion for microcontrollers, development boards, and embedded systems. Powered by the FT232RL chipset from FTDI, this adapter simplifies programming, debugging, and data communication tasks with stable and efficient transfer.

Key Features

• FT232RL chipset for proven FTDI reliability and wide driver support
• Reliable USB to TTL conversion for stable serial data transmission
• High compatibility with Arduino, Raspberry Pi, ESP boards, and many microcontrollers
• Selectable logic levels for 3.3V and 5V systems (VCCIO configured on the board)
• Compact form factor for easy integration into breadboards and prototypes
• Plug-and-play operation with native drivers available for Windows, macOS, and Linux

Why Choose the FT232 USB to TTL Adapter?

This FTDI USB to Serial Converter delivers fast, stable communication suited for hobbyist projects and professional applications. Use it to program microcontrollers, stream sensor data to a PC, or add serial connectivity to consumer and industrial devices. The adapter reduces development time with minimal setup and broad platform support.

Applications and Use Cases

• Programming and debugging Arduino and compatible boards
• Serial communication for Raspberry Pi projects and HATs
• Data logging and telemetry for robotics and automation systems
• Flashing firmware and communicating with embedded modules
• Quick prototyping and testing on breadboards and development rigs

Typical Pinout

Common breakout pins on the FT232 module include:

• VCC / VCCIO – power and logic-level selection
• GND – common ground
• TXD – transmit data (module to host)
• RXD – receive data (host to module)
• RTS / CTS / DTR – handshake and control signals (board dependent)

Driver and Compatibility Notes

• Native FTDI drivers are available for Windows, macOS, and Linux
• No special libraries required for standard UART communication
• Works with common IDEs and serial terminals for instant use

Quick Start

1. Install FTDI drivers for your operating system if needed
2. Set VCCIO to match your target device logic level (3.3V or 5V)
3. Connect TXD to RX, RXD to TX, and GND to GND
4. Open your serial terminal or IDE, select the COM port, and set the baud rate

What You Get

• One FT232 FTDI-232 USB to TTL Serial Adapter Module
• Plug-and-play ready for rapid prototyping and development

Ready to Improve Your Serial Connectivity?

Choose the FT232 FTDI-232 USB to TTL Serial Adapter Module for dependable USB-to-serial conversion that simplifies development and improves communication reliability. Order now to speed up programming, debugging, and data transfer in your projects.