DALY BMS for LifePO4 Battery 100A (Standard)

DALY BMS 100A Overview

The DALY BMS for LifePO4 Battery 100A is a robust Battery Management System designed to protect, monitor, and optimize Lithium Iron Phosphate (LifePO4) battery packs. Built for demanding applications, the DALY BMS 100A delivers reliable protection and precise management needed to extend battery life and improve performance.

Designed for LifePO4 Batteries

• Precision monitoring and control tailored to LiFePO4 cell chemistry.
• Cell-voltage specific thresholds and balancing algorithms to prevent imbalance and degradation.

Key Features and Benefits

• 100A High Capacity: Supports up to 100A continuous discharge for electric vehicles, large solar storage, and industrial setups.
• Comprehensive Protection: Overcharge protection, over-discharge protection, short circuit protection, and temperature monitoring to protect both the battery pack and connected equipment.
• Advanced Cell Balancing: Active balancing maintains uniform voltages across cells to maximize usable capacity and extend cycle life.
• Real-time Monitoring: Accurate measurement of voltage, current, temperature, and state of charge (SOC) helps you monitor battery health and performance.
• Built-in Communication: UART, RS485, and CAN bus interfaces enable remote monitoring, integration with controllers, and data logging for diagnostics.
• Compact and Durable: Small form factor with robust construction suitable for indoor and outdoor installations.

Protection and Safety Features

• Cell overvoltage and undervoltage protection with configurable thresholds.
• Pack overcurrent and short circuit protection to avoid catastrophic failures.
• Temperature sensing and cutoff to prevent thermal damage.
• Automatic recovery and manual reset options depending on fault type.

Monitoring, Communication, and Integration

• Real-time data: voltage per cell, total pack voltage, current, temperature, and SOC.
• Communication ports: UART for simple integration, RS485 for longer distance networks, and CAN bus for vehicle and industrial systems.
• Enables remote monitoring, telemetry, and integration with BMS software or third-party energy management systems.

Applications

• Electric vehicles: cars, motorcycles, scooters, electric bicycles.
• Renewable energy storage: solar battery banks, off-grid inverter systems, and hybrid power systems.
• Industrial and commercial energy storage and backup power systems.
• Marine and recreational vehicles: boats, yachts, and RV power systems.

Installation and Compatibility

• Compact design for easy installation inside battery enclosures or equipment cabinets.
• Compatible with most LifePO4 cells and standard pack configurations. Confirm cell count and wiring before installation.
• Supports integration with inverters, chargers, and monitoring systems via available communication ports.

Why Choose DALY BMS 100A?

The DALY BMS 100A offers a reliable balance of protection, performance, and integration capability. Whether you are retrofitting an EV, building a solar storage system, or installing backup power for commercial use, this BMS helps ensure safety, improve battery longevity, and simplify system monitoring.

Technical Notes and Best Practices

• Verify the correct cell count and voltage range for your LifePO4 pack before configuring the BMS.
• Use recommended wiring gauges and proper fusing to match the 100A capacity and minimize voltage drop.
• Implement periodic checks on temperature sensors and communication links for reliable long-term operation.

Ordering and Support

If you need assistance selecting the correct DALY BMS for your project or require technical support for installation and configuration, contact your supplier or installer. Proper setup and calibration will ensure maximum reliability and safety of your LifePO4 battery system.

Upgrade your LifePO4 battery system with the DALY BMS 100A for improved safety, higher performance, and dependable monitoring in demanding energy storage applications.